Journals >Frontiers of Optoelectronics
Contents
2024
Volume: 17 Issue 3
11 Article(s)
Export citation format
CORRECTION
Correction: Control of visible-range transmission and reflection haze by varying pattern size, shape and depth in flexible metasurfaces
Maity Avijit, Biswas Vaswati, and Vijaya R.
Frontiers of Optoelectronics
- Publication Date: Aug. 25, 2024
- Vol. 17, Issue 3, 30 (2024)
RESEARCH ARTICLE
Novel elastomeric spiropyran-doped poly(dimethylsiloxane) optical waveguide for UV sensing
Zimmermann Camila Aparecida, Amouzou Koffi Novignon, Sengupta Dipankar, Kumar Aashutosh, Demarquette Nicole Raymonde, and Ung Bora
Novel poly(dimethylsiloxane) (PDMS) doped with two different spiropyran derivatives (SP) were investigated as potential candidates for the preparation of elastomeric waveguides with UV-dependent optical properties. First, free-standing films were prepared and evaluated with respect to their photochromic response to UV Novel poly(dimethylsiloxane) (PDMS) doped with two different spiropyran derivatives (SP) were investigated as potential candidates for the preparation of elastomeric waveguides with UV-dependent optical properties. First, free-standing films were prepared and evaluated with respect to their photochromic response to UV irradiation. Kinetics, reversibility as well as photofatigue and refractive index of the SP-doped PDMS samples were assessed. Second, SP-doped PDMS waveguides were fabricated and tested as UV sensors by monitoring changes in the transmitted optical power of a visible laser (633 nm). UV sensing was successfully demonstrated by doping PDMS using one spiropyran derivative whose propagation loss was measured as 1.04 dB/cm at 633 nm, and sensitivity estimated at 115% change in transmitted optical power per unit change in UV dose. The decay and recovery time constants were measured at 42 and 107 s, respectively, with an average UV saturation dose of 0.4 J/cm2. The prepared waveguides exhibited a reversible and consistent response even under bending. The sensor parameters can be tailored by varying the waveguide length up to 21 cm, and are affected by white light and temperatures up to 70 ℃. This work is relevant to elastomeric optics, smart optical materials, and polymer optical waveguide sensors..
Frontiers of Optoelectronics
- Publication Date: Jul. 15, 2024
- Vol. 17, Issue 3, 21 (2024)
Polarization and wavelength routers based on diffractive neural network
Lin Xiaohong, Fu Yulan, Zhang Kuo, Zhang Xinping, Feng Shuai, and Hu Xiaoyong
In the field of information processing, all-optical routers are significant for achieving high-speed, high-capacity signal processing and transmission. In this study, we developed three types of structurally simple and flexible routers using the deep diffractive neural network (D2NN), capable of routing incident light In the field of information processing, all-optical routers are significant for achieving high-speed, high-capacity signal processing and transmission. In this study, we developed three types of structurally simple and flexible routers using the deep diffractive neural network (D2NN), capable of routing incident light based on wavelength and polarization. First, we implemented a polarization router for routing two orthogonally polarized light beams. The second type is the wavelength router that can route light with wavelengths of 1550, 1300, and 1100 nm, demonstrating outstanding performance with insertion loss as low as 0.013 dB and an extinction ratio of up to 18.96 dB, while also maintaining excellent polarization preservation. The final router is the polarization-wavelength composite router, capable of routing six types of input light formed by pairwise combinations of three wavelengths (1550, 1300, and 1100 nm) and two orthogonal linearly polarized lights, thereby enhancing the information processing capability of the device. These devices feature compact structures, maintaining high contrast while exhibiting low loss and passive characteristics, making them suitable for integration into future optical components. This study introduces new avenues and methodologies to enhance performance and broaden the applications of future optical information processing systems..
Frontiers of Optoelectronics
- Publication Date: Jul. 16, 2024
- Vol. 17, Issue 3, 22 (2024)
Mode division multiplexing reconstructive spectrometer with an all-fiber photonics lantern
Liang Junrui, Ye Jun, Ma Xiaoya, Lu Yao, Li Jun, Xu Jiangming, Chen Zilun, Leng Jinyong, Jiang Zongfu, and Zhou Pu
This study presents a high-accuracy, all-fiber mode division multiplexing (MDM) reconstructive spectrometer (RS). The MDM was achieved by utilizing a custom-designed 3 × 1 mode-selective photonics lantern to launch distinct spatial modes into the multimode fiber (MMF). This facilitated the information transmissionThis study presents a high-accuracy, all-fiber mode division multiplexing (MDM) reconstructive spectrometer (RS). The MDM was achieved by utilizing a custom-designed 3 × 1 mode-selective photonics lantern to launch distinct spatial modes into the multimode fiber (MMF). This facilitated the information transmission by increasing light scattering processes, thereby encoding the optical spectra more comprehensively into speckle patterns. Spectral resolution of 2 pm and the recovery of 2000 spectral channels were accomplished. Compared to methods employing single-mode excitation and two-mode excitation, the three-mode excitation method reduced the recovered error by 88% and 50% respectively. A resolution enhancement approach based on alternating mode modulation was proposed, reaching the MMF limit for the 3 dB bandwidth of the spectral correlation function. The proof-of-concept study can be further extended to encompass diverse programmable mode excitations. It is not only succinct and highly efficient but also well-suited for a variety of high-accuracy, high-resolution spectral measurement scenarios..
Frontiers of Optoelectronics
- Publication Date: Jul. 17, 2024
- Vol. 17, Issue 3, 23 (2024)
Real-time detection of aging status of methylammonium lead iodide perovskite thin films by using terahertz time-domain spectroscopy
Xu Jinzhuo, Wu Yinghui, Fan Shuting, Liu Xudong, Yin Zhen, Yang Youpeng, Wang Renheng, Qian Zhengfang, and Sun Yiwen
The inadequate stability of organic–inorganic hybrid perovskites remains a significant barrier to their widespread commercial application in optoelectronic devices. Aging phenomena profoundly affect the optoelectronic performance of perovskite-based devices. In addition to enhancing perovskite stability, the real-time The inadequate stability of organic–inorganic hybrid perovskites remains a significant barrier to their widespread commercial application in optoelectronic devices. Aging phenomena profoundly affect the optoelectronic performance of perovskite-based devices. In addition to enhancing perovskite stability, the real-time detection of aging status, aimed at monitoring the aging progression, holds paramount importance for both fundamental research and the commercialization of organic–inorganic hybrid perovskites. In this study, the aging status of perovskite was real-time investigated by using terahertz time-domain spectroscopy. Our analysis consistently revealed a gradual decline in the intensity of the absorption peak at 0.968 THz with increasing perovskite aging. Furthermore, a systematic discussion was conducted on the variations in intensity and position of the terahertz absorption peaks as the perovskite aged. These findings facilitate the real-time assessment of perovskite aging, providing a promising method to expedite the commercialization of perovskite-based optoelectronic devices..
Frontiers of Optoelectronics
- Publication Date: Jul. 29, 2024
- Vol. 17, Issue 3, 24 (2024)
Control of visible-range transmission and reflection haze by varying pattern size, shape and depth in flexible metasurfaces
Maity Avijit, Biswas Vaswati, and Vijaya R.
Cost-effective soft imprint lithography technique is used to prepare flexible thin polymeric surfaces containing a periodic arrangement of nanodimples and nanobumps of sub-micron size. Using a single master mold of self-assembled colloidal crystal, metasurfaces with different depths and heights of patterns with a fixedCost-effective soft imprint lithography technique is used to prepare flexible thin polymeric surfaces containing a periodic arrangement of nanodimples and nanobumps of sub-micron size. Using a single master mold of self-assembled colloidal crystal, metasurfaces with different depths and heights of patterns with a fixed pitch are possible, which makes the process inexpensive and simple. These metasurfaces are studied for their diffuse and total transmission and reflection spectra in the visible range. The transmission haze and reflection haze are calculated from the measurements. The surface containing nanobumps of lesser pattern height result in higher values of reflection and transmission haze than from surfaces containing nanodimples of much higher depth for the same pitch. The haze is more dependent on the pattern depth or height and less dependent on the pitch of the pattern. Far-field transmission profiles measured in the same wavelength range from the patterned surfaces show that the scattering increases with the increase of the ratio of pattern depth/height to pitch, similar to the haze measurements conducted with a closed integrating sphere. These profiles show that the angular spread of scattered light in transmission is within 10°, explaining the reason for the relatively low transmission haze in all the patterned surfaces. Simulation results confirm that the nanobump pattern gives higher transmission haze compared to nanodimple pattern. By controlling the ratio of pattern depth/height to pitch of the features on these surfaces, both an increase in optical haze and a balance between total reflection intensity and total transmission intensity can be achieved..
Frontiers of Optoelectronics
- Publication Date: Jul. 30, 2024
- Vol. 17, Issue 3, 25 (2024)
Exceptional point enhanced nanoparticle detection in deformed Reuleaux-triangle microcavity
Fei Jinhao, Zhang Xiaobei, Zhang Qi, Yang Yong, Wang Zijie, Deng Chuanlu, Huang Yi, and Wang Tingyun
In this paper, we propose a deformed Reuleaux-triangle resonator (RTR) to form exceptional point (EP) which results in the detection sensitivity enhancement of nanoparticle. After introducing single nanoparticle to the deformed RTR at EP, frequency splitting obtains an enhancement of more than 6 times compared with nonIn this paper, we propose a deformed Reuleaux-triangle resonator (RTR) to form exceptional point (EP) which results in the detection sensitivity enhancement of nanoparticle. After introducing single nanoparticle to the deformed RTR at EP, frequency splitting obtains an enhancement of more than 6 times compared with non-deformed RTR. In addition, EP induced a result that the far field pattern of chiral mode responses significantly to external perturbation, corresponding to the change in internal chirality. Therefore, single nanoparticle with far distance of more than 4000 nm can be detected by measuring the variation of far field directional emission. Compared to traditional frequency splitting, the far field pattern produced in deformed RTR provides a cost-effective and convenient path to detect single nanoparticle at a long distance, without using tunable laser and external coupler. Our structure indicates great potential in high sensitivity sensor and label-free detector..
Frontiers of Optoelectronics
- Publication Date: Aug. 08, 2024
- Vol. 17, Issue 3, 27 (2024)
Low-light enhancement method with dual branch feature fusion and learnable regularized attention
Sun Yixiang, Ni Mengyao, Zhao Ming, Yang Zhenyu, Peng Yuanlong, and Cao Danhua
Restricted by the lighting conditions, the images captured at night tend to suffer from color aberration, noise, and other unfavorable factors, making it difficult for subsequent vision-based applications. To solve this problem, we propose a two-stage size-controllable low-light enhancement method, named Dual Fusion EnRestricted by the lighting conditions, the images captured at night tend to suffer from color aberration, noise, and other unfavorable factors, making it difficult for subsequent vision-based applications. To solve this problem, we propose a two-stage size-controllable low-light enhancement method, named Dual Fusion Enhancement Net (DFEN). The whole algorithm is built on a double U-Net structure, implementing brightness adjustment and detail revision respectively. A dual branch feature fusion module is adopted to enhance its ability of feature extraction and aggregation. We also design a learnable regularized attention module to balance the enhancement effect on different regions. Besides, we introduce a cosine training strategy to smooth the transition of the training target from the brightness adjustment stage to the detail revision stage during the training process. The proposed DFEN is tested on several low-light datasets, and the experimental results demonstrate that the algorithm achieves superior enhancement results with the similar parameters. It is worth noting that the lightest DFEN model reaches 11 FPS for image size of 1224×1024 in an RTX 3090 GPU..
Frontiers of Optoelectronics
- Publication Date: Aug. 14, 2024
- Vol. 17, Issue 3, 28 (2024)
Stereoscopic spatial graphical method of Mueller matrix: Global-Polarization Stokes Ellipsoid
Zhang Xinxian, Song Jiawei, Fan Jiahao, Zeng Nan, He Honghui, Tuchin Valery V., and Ma Hui
A Mueller matrix covers all the polarization information of the measured sample, however the combination of its 16 elements is sometimes not intuitive enough to describe and identify the key characteristics of polarization changes. Within the Poincar sphere system, this study achieves a spatial representation of the MuA Mueller matrix covers all the polarization information of the measured sample, however the combination of its 16 elements is sometimes not intuitive enough to describe and identify the key characteristics of polarization changes. Within the Poincaré sphere system, this study achieves a spatial representation of the Mueller matrix: the Global-Polarization Stokes Ellipsoid (GPSE). With the help of Monte Carlo simulations combined with anisotropic tissue models, three basic characteristic parameters of GPSE are proposed and explained, where the V parameter represents polarization maintenance ability, and the E and D? parameters represent the degree of anisotropy. Furthermore, based on GPSE system, a dynamic analysis of skeletal muscle dehydration process demonstrates the monitoring effect of GPSE from an application perspective, while confirming its robustness and accuracy..
Frontiers of Optoelectronics
- Publication Date: Aug. 16, 2024
- Vol. 17, Issue 3, 29 (2024)
Dual-functional application of Ca2Ta2O7: Bi3+/Eu3+ phosphors in multicolor tunable optical thermometry and WLED
Ru Jingjing, Zhao Bing, Zeng Fan, Guo Feiyun, Liu Jinhua, and Chen Jianzhong
A series of Bi3+/Eu3+ co-doped Ca2Ta2O7(CTO:Bi3+/Eu3+) phosphors were prepared by high-temperature solid-state method for dual-emission center optical thermometers and white light-emitting diode (WLED) device. By modulating the doping ratio of Bi3+/Eu3+ and utilizing the energy transfer from Bi3+ to Eu3+, the tunable cA series of Bi3+/Eu3+ co-doped Ca2Ta2O7(CTO:Bi3+/Eu3+) phosphors were prepared by high-temperature solid-state method for dual-emission center optical thermometers and white light-emitting diode (WLED) device. By modulating the doping ratio of Bi3+/Eu3+ and utilizing the energy transfer from Bi3+ to Eu3+, the tunable color emission ranging from green to reddish-orange was realized. The designed CTO:0.04Bi3+/Eu3+ optical thermometers exhibit significant thermochromism, superior stability, and repeatability, with maximum sensitivities of Sa = 0.055 K?1 (at 510 K) and Sr = 1.298% K?1 (at 480 K) within the temperature range of 300?510 K, owing to the different thermal quenching behaviors between Bi3+ and Eu3+ ions. These features indicate the potential application prospects of the prepared samples in visualized thermometer or high-temperature safety marking. Furthermore, leveraging the excellent zero-thermal-quenching performance, outstanding acid/alkali resistance, and color stability of CTO:0.04Bi3+/0.16Eu3+ phosphor, a WLED device with a high Ra value of 95.3 has been realized through its combination with commercially available blue and green phosphors, thereby demonstrating the potential application of CTO:0.04Bi3+/0.16Eu3+ in near-UV pumped WLED devices..
Frontiers of Optoelectronics
- Publication Date: Sep. 04, 2024
- Vol. 17, Issue 3, 31 (2024)
REVIEW ARTICLE
Contactless integrated photonic probes: fundamentals, characteristics, and applications
Wu Guangze, Wan Yuanjian, Wang Zhao, Hu Xiaolong, Zeng Jinwei, Zhang Yu, and Wang Jian
On-chip optical power monitors are indispensable for functional implementation and stabilization of large-scale and complex photonic integrated circuits (PICs). Traditional on-chip optical monitoring is implemented by tapping a small portion of optical power from the waveguide, which leads to significant loss. Due to iOn-chip optical power monitors are indispensable for functional implementation and stabilization of large-scale and complex photonic integrated circuits (PICs). Traditional on-chip optical monitoring is implemented by tapping a small portion of optical power from the waveguide, which leads to significant loss. Due to its advantages like non-invasive nature, miniaturization, and complementary metal-oxide-semiconductor (CMOS) process compatibility, a transparent monitor named the contactless integrated photonic probe (CLIPP), has been attracting great attention in recent years. The CLIPP indirectly monitors the optical power in the waveguide by detecting the conductance variation of the local optical waveguide caused by the surface state absorption (SSA) effect. In this review, we first introduce the fundamentals of the CLIPP including the concept, the equivalent electric model and the impedance read-out method, and then summarize some characteristics of the CLIPP. Finally, the functional applications of the CLIPP on the identification and feedback control of optical signal are discussed, followed by a brief outlook on the prospects of the CLIPP..
Frontiers of Optoelectronics
- Publication Date: Aug. 05, 2024
- Vol. 17, Issue 3, 26 (2024)
© Copyright 2018-2021 | Chinese Laser Press. All Rights Reserved 沪ICP备15018463号-20