
- Advanced Photonics
- Vol. 5, Issue 5, 050503 (2023)
Abstract
Silicon nitride () waveguides, recognized for their large transparency window and low propagation loss, have been widely applied in microwave photonics, integrated lasers, and optical computing. Pushing towards even lower loss in the platform would enable large-scale photonic integrated circuits and reduce the overall size, weight, power, and cost (SWaP-C). Current strategies to reduce the loss of silicon nitride waveguides include thermal annealing,1 multipass lithography,2 or using deuterated silane as the precursor.3 While effective, these approaches are either incompatible with the CMOS process or currently not available from the foundry.
Propagation loss in the high-confinement waveguides mainly arises from the interaction between the mode field and the rough sidewalls. Recently, Yuan Yu and co-workers leveraged the multi-mode structure to minimize the scattering loss from the sidewall of the waveguide (see Fig. 1). They optimized the waveguide width, adopted adiabatic multi-mode directional couplers, and employed modified Euler bends, consequently, the propagation loss is significantly reduced from down to .4 Notably, all designs are realized in a multi-project wafer run and no additional process is required, distinguishing it from other complicated fabrication techniques.
Figure 1.(a) Schematic illustration of the proposed compact ultrahigh-
The authors verified the results by measuring the resonance linewidth of multiple microring resonators (MRRs) across one wafer. They reported intrinsic linewidth of MRRs in the range of 18 to 20 MHz, corresponding to an intrinsic quality factor of approximately 10.8 million (see Fig. 2). This improvement over previous values demonstrates the effectiveness of the multi-mode waveguide approach in minimizing propagation loss, which also has the potential for broader applications across different material platforms.
Sign up for Advanced Photonics TOC. Get the latest issue of Advanced Photonics delivered right to you!Sign up now
Figure 2.(a) The histogram of the intrinsic linewidth of the MRRs; (b) a representative resonance with critical coupling (reproduced from Ref.
Benefiting from the high optical confinement of the waveguide, the bending radii of the waveguide can be small. Based on their optimized waveguide structure, the authors demonstrate an MRR with a free spectral range (FSR) of 65 GHz. The large FSR makes the device attractive for microwave photonics applications that require large bandwidth.
While the introduction of multi-mode waveguides is innovative, it may introduce complexities in terms of mode control and design optimization. The suppression of higher-order modes excitation and coupling in multi-mode structures is quite challenging, thus requiring additional research and design efforts. Certain components, such as modified Euler bends and multi-mode directional couplers, may require high-precision fabrication techniques. Ensuring consistent and precise fabrication can be challenging, impacting yield and reproducibility.
In summary, the new publication from Yu and co-workers offers a new way to design MRR with a large FSR and high intrinsic -factor within the standard manufacturing process. With further exploration and refinement, the proposed multi-mode waveguide approach has the potential to benefit a wide range of applications across industries.
Kaixuan Ye is currently a PhD student in Prof. Marpaung’s Nonlinear Nanophotonics Group at the University of Twente. He received the bachelor’s degree in microelectronic science and engineering, and the master’s degree in electronic and communication engineering, both from Huazhong University of Science and Technology (HUST), in 2019 and 2021, respectively. His research interests include stimulated Brillouin scattering in silicon waveguide and integrated microwave photonics.
David Marpaung is a professor leading the Nonlinear Nanophotonics Group at the University of Twente. He is the co-chairholder of the Laser Physics and Nonlinear Optics Chair. He received his PhD in electrical engineering from the University of Twente, The Netherlands in 2009. From 2009 to 2012 he was a postdoctoral researcher at the University of Twente, working on microwave photonic system integration for optical beamforming. He joined CUDOS University of Sydney, Australia in August 2012 as a research fellow. From 2015 to 2017 he was a senior research fellow leading the nonlinear integrated microwave photonics research activities in CUDOS University of Sydney. He was the recipient of the 2015 Discovery Early Career Research Award (DECRA) from the Australian Research Council and the 2017 Vidi award from the Netherlands Organisation for Scientific Research (NWO). His research interests include RF photonics, photonic integration, nonlinear optics, and phononics.
References
[3] D. Bose et al. Anneal-free ultra-low loss silicon nitride integrated photonics(2023).

Set citation alerts for the article
Please enter your email address