
- Advanced Photonics
- Vol. 5, Issue 1, 015001 (2023)
Abstract
1 Introduction
Topological solitons with topologically protected spin texture are of fundamental interest in exploring fascinating physical phenomena and nonlinear field theories.1 In particular, numerous low-dimensional topological solitonic textures have been extensively studied in recent years, such as one-dimensional magnetic domain walls and magnetic skyrmions,2
Hopfions, as the most classic 3D topological solitons, were initially proposed in the Skyrme–Faddeev model.19
In this letter, we theoretically and experimentally demonstrate a generalized family of photonic hopfions constructed using superposition of paraxial Laguerre–Gaussian (LG) beams with customized polarization patterns. The generated complex vector fields have spatially varying 3D polarization distributions, which exhibit hopfion topological textures. The observed photonic hopfions can be freely transformed to various topological states, including Néel-type (hedgehog), Bloch-type (vortex), and antitype (saddle) textures and many intermediate topological classes. For each on-demand texture, a topological charge (Hopf index) of hopfions can also be tuned to arbitrary integers, realizing higher-order hopfions. We also demonstrate a free-space transport of hopfions with protected topology, revealing the potential to develop the technology of topological information transfer.
Sign up for Advanced Photonics TOC. Get the latest issue of Advanced Photonics delivered right to you!Sign up now
2 Results
In topology, a hopfion configuration is usually represented by a 3D real-space distribution of generalized unit spin vectors, , and achieved by a stereographic projection from a hypersphere [] to a real space [], fulfilling the Hopf map , where and correspond to the three Pauli matrices.29 As a geometric representation of a Hopf map, a point on a sphere (a so-called 2-sphere) corresponds to a closed line (loop) in a real space rather than a point in a real space, revealing the additional dimension of a hypersphere. Each loop corresponds to an isospin contour [ = const] in the hopfion texture. Extending this description to optics, components correspond to the real and imaginary parts of the complex-valued fields projected onto the circular polarization basis, thus capturing both polarization and phase variations in a 3D space. In turn, is, therefore, formed by Stokes vectors , describing spatial variations of polarization of an optical field, and a 2-sphere is equivalent to a Poincaré sphere. In this framework, the isospin contours are isopolarization contours of an optical vector field.
An example of the mapping is illustrated in Fig. 1. Latitude, , and longitude, , of each point on a parametric 2-sphere, which represents a spin vector, are shown in Fig. 1(a) with hue color and lightness, respectively. The corresponding stereographic projection of an isopolarization contour in a real space is shown as a loop with the same color in Figs. 1(b) and 1(c). The loops mapped from the points on the same latitude of a parametric sphere form a set of the torus knots (a set of knots that lies on the surface of a torus), completely covering a torus when scanning the points with different longitudes [Fig. 1(b)]. Thus, the full unwrapping of the parametric sphere (for all latitudes and longitudes) results in the torus knots on the nested tori with each torus corresponding to different latitudes , akin to matryoshka [Fig. 1(c)]; this construction is termed the Hopf fibration. In two extreme cases of the mapping, the spin-down contour (left circular polarization in optics), corresponding to the south pole of a 2-sphere, is the ring at the core of the nested tori (black line), whereas the spin-up contour (right circular polarization), corresponding to the north pole, is the line in the direction along the axis of the nested tori.
Figure 1.(a) The parameter-space visualization of a hypersphere: the longitude and latitude degrees (
How knotted each torus knot is depends on the topological charge (Hopf index, ) (see Supplementary Note I and Ref. 48). The Hopf index (topological charge) is determined by an around-torus index and a through-torus index via , which describes how many times an isospin contour goes around the torus () and through the torus hole (). A fundamental hopfion corresponds to one around and one through a torus configuration ().
The 3D spin texture of a hopfion is shown in Fig. 1(d), where the colors of vectors correspond to the isospin contours in Fig. 1(c). A 3D hopfion is closely related to 2D skyrmions. Hopfion textures have a skyrmionium (a doughnut-shaped texture composed by two nested skyrmions with opposite polarities) in the cross section at [Fig. 1(e)], and the cross section () corresponds to two skyrmions with opposite vorticity and opposite skyrmion topological charges [Fig. 1(f)]. These are the signatures of a hopfion, since the hopfion can be represented by an end-to-end twisted skyrmion tube.31 Due to the closed connection to skyrmions, hopfions can be classified by the type of skyrmionium in the cross section, which in turn is classified by the type of 2D skyrmions forming it (see Supplementary Note II for details).11
The topological number of a hopfion (Hopf index) is defined by25, where , in which , is the Levi–Civita tensor, and is the vector potential satisfying and is closely related to the skyrmion number ( and correspond to the skyrmion numbers of the skyrmions in the and cross sections of a hopfion43), which can be defined by the product of topological numbers of polarity and vorticity of the skyrmion spin texture.13,49 The polarity is defined by the vector direction down (up) at the center and up (down) at the skyrmion boundary for (), and the vorticity can be an arbitrary integer that controls the azimuthal distribution of the transverse vector field components. For a fixed vorticity, an initial phase should be added to distinguish the helicity to completely decide the transverse distribution of the vector field, i.e., , which is termed helicity. For instance, a skyrmion with vorticity charge represents a hedgehog-like texture for a helicity (named Néel Type-I), a squeezed hedgehog-like texture when helicity is (named Néel Type-II), and a right- or left-handed vortex texture when helicity is or (named Bloch type), whereas for the vorticity charge of , the skyrmion has a saddle-like texture (named antitype). The classification can be applied to hopfions, i.e., Néel, Bloch, antitype hopfions, given that the skyrmion appears in the cross section of the hopfion.
Using structured light technologies to sculpture complex nonseparable states of an optical vector field,50
Topological protection of photonic hopfions is provided by the required Gouy phase difference [Eq. (S17) in the Supplementary Material] between the modal components. A finite size of a beam causes spread of the transverse wave vector components and a corresponding reduction of the longitudinal wave vector component, resulting in an additional (Gouy) phase. The three modal components must have a fixed ratio of the Gouy phases (e.g., for fundamental order hopfions), so that the hopfion topology can be stable and protected irrespectively of how absolute values of the intermodal phases change during propagation. In the opposite situation, for example, if the vortex component of the hopfion has mixed modes with the Gouy phases that do not satisfy the above condition, the beam will show a drastically variant structure upon propagation.11,53
Using the developed approach, photonic hopfions of arbitrary topological numbers and with all kinds of hopfionic textures can be generated, including Néel, Bloch, antitypes, and intermediate states. For example, choosing , the texture of a photonic hopfion can be switched by simply tuning between Néel Type-I (), Bloch type (), Néel Type-II () [Figs. 2(a)–2(c)]. Choosing , the photonic hopfion of the antitype is observed in the case of [Fig. 2(d)]. The experimentally measured polarization distributions in the optical hopfions of Néel Type-I (), Bloch type (), Néel Type-II (), and antitype () are in excellent agreement with the theoretical results (Fig. 2).
Figure 2.Left, simulated Stokes vector distributions in the skyrmionium textures in the
In a fundamental-order hopfion, each fiber as a torus knot in the Hopf fibration goes one time through and one time around the torus, resulting in a topological charge of (“” decides chirality). For higher-order hopfions, if each torus-knot fiber goes times through and times around the torus, the topological charge is .48 The vector fields of various higher-order hopfions can also be characterized by a closed-form expression related to and (see Supplementary Note I). Three examples of the torus-knot configurations of three higher-order hopfions with , , and were generated, using LG beams with (Fig. 3). In general, for a given value of , the torus-knot indices are determined by . For each higher-order hopfion, the cross section shows corresponding higher-order skyrmionium textures with vorticity equal to , and the cross section shows two skyrmions with opposite higher-order vorticity.
Figure 3.(Top) The torus-knot configurations of a toroidal layer in the Hopf fibration for the higher-order hopfions with Hopf indices of (a)
In the past, a hopfion was always considered a static topological quasiparticle. Our developed approach provides a unique possibility to stimulate and observe free-space transport of hopfions with the preserved topology. This is achieved by tuning a phase parameter . In Figs. 2 and 3, and the hopfion center is located at . If the phase parameter is tuned, the hopfion configuration controllably propagates along the axis (the hopfion center moves in a direction). For example, when , the hopfion is centered at (where is the Rayleigh length). When the value of is gradually increased to , the hopfion center moves to (Fig. 4). The propagation can be explained and simulated considering the Gouy phase mediated intramodal phase changes. These lead to the variations of the amplitude profile of along the radial direction upon propagation,54 which determines the z-position of a 3D polarization texture of hopfions. As the initial intramodal phase is modified, the center of a hopfion ring, which corresponds to a plane with , moves along the direction (Supplementary Note IV).
Figure 4.Propagation of photonic hopfions in free space. (Top) Theoretical and (bottom) experimental polarization distributions in the
3 Discussion and Conclusion
We presented both theoretical and experimental demonstrations of reconfigurable higher-order hopfionic textures and their free-space transport in paraxial structured light. The topological transformations between hopfions of Néel, Bloch, and antitypes were achieved, and the developed principle can be applied to other types of hopfions. The implemented mechanism to transport a hopfion structure maybe of interest for development of topological classical and quantum information carriers for optical communications and data manipulation, with robust topological protection against perturbations, such as scattering and disorder. Hopfions encompass the control of new topologies of structured light, which provides many degrees of freedom for these applications.
In this work, we studied optical hopfions in free space and realized their higher-order transformation with a controlled topological number. The described technique can be extended to other kinds of topological quasi-particles with sophisticated textures, such as torons55 and heliknotons,56 that were studied in solid-state systems but have never been explored in light fields. Because the topological numbers are mainly controlled by the OAM of a light field, the unresolved challenge is to achieve independent tuning of Hopf link numbers and .
It is also straightforward to generalize the results to an isotropic, nonmagnetic, and achiral medium, which would only introduce a scaling factor related to its refractive index. Similarly, media with the mode-independent gain and loss should also preserve the topological structure. A more complex and rich physics is expected for the optical hopfions in anisotropic, magnetic, and chiral media, or in the presence of strong mode-dependent gain and loss, which would influence the evolution of different modal components differently.
Yijie Shen received his PhD in optical engineering from Tsinghua University, Beijing, China, in 2019. Currently, he is a senior research fellow at Optoelectronics Research Centre (ORC), University of Southampton, United Kingdom. He was also a visiting researcher at the Structured Light Laboratory, School of Physics, University of the Witwatersrand (Wits University), Johannesburg, South Africa, in 2019. His research interests include structured light, ultrafast nonlinear optics, quantum optics, metamaterial, and nanophotonics.
Bingshi Yu received his BSc degree in applied physics from Harbin University of Science and Technology, China, in 2021. Currently, he is pursuing an MS degree at the Quantum Optics Laboratory led by Zhihan Zhu and Carmelo Rosales-Guzmán at the Harbin University of Science and Technology. His research interests include shaping and characterizing photons’ full spatiotemporal amplitude, phase, and spin structures.
Haijun Wu received his BSc degree in applied physics from Harbin University of Science and Technology, China, in 2018. He joined the Quantum Optics Laboratory led by Zhihan Zhu and Carmelo Rosales-Guzmán and received his MS degree in physics in 2020. Currently, he is pursuing a PhD at the same laboratory. His research interests include shaping and controlling structured photons via nonlinear interactions.
Chunyu Li received her BSc degree in applied physics from Harbin University of Science and Technology, China, in 2020. Currently, she is pursuing a PhD at the Quantum Optics Laboratory led by Zhihan Zhu and Carmelo Rosales-Guzmán at the Harbin University of Science and Technology. Her research interests include shaping and controlling light full spatiotemporal structure via geometric-phase elements.
Zhihan Zhu received his PhD in optics from Harbin University of Science and Technology in 2017, where he established Quantum Optics Group and Laboratory. Currently, he is a professor of optics at Heilongjiang Key Laboratory of Quantum Control in Harbin (China). His research interests include quantum and nonlinear optics with structured light, especially for generation and manipulation of structured photons via nonlinear interactions.
Anatoly V. Zayats is Chair in experimental physics and head of the Photonics & Nanotechnology at the Department of Physics, King’s College London. He is a co-director of the London Centre for Nanotechnology and the London Institute for Advanced Light Technologies. His research interests include nanophotonics and plasmonics, metamaterials and metasurfaces, electromagnetic field topology and optical spin-orbit coupling, and nonlinear and ultrafast optics.
References
[1] N. Manton, P. Sutcliffe. Topological Solitons(2004).
[11] Y. Shen. Topological bimeronic beams. Opt. Lett., 46, 3737-3740(2021).
[18] F. Zheng et al. Magnetic skyrmion braids. Nat. Commun., 12, 5316(2021).
[20] T. H. R. Skyrme. A non-linear field theory. Proc. R. Soc. A, 260, 127-138(1961).
[21] T. H. R. Skyrme. A unified field theory of mesons and baryons. Nucl. Phys., 31, 556-569(1962).
[24] D. W. Lyons. An elementary introduction to the Hopf fibration. Math. Mag., 76, 87-98(2003).
[30] I. Luk’yanchuk et al. Hopfions emerge in ferroelectrics. Nat. Commun., 11, 2433(2020).
[33] D. S. Hall et al. Tying quantum knots. Nat. Phys., 12, 478-483(2016).
[44] D. Sugic et al. Particle-like topologies in light. Nat. Commun., 12, 6785(2021).
[45] M. R. Dennis et al. Isolated optical vortex knots. Nat. Phys., 6, 118-121(2010).
[47] C. Wan et al. Scalar optical hopfions. eLight, 2, 22(2022).
[48] M. Kobayashi, M. Nitta. Torus knots as hopfions. Phys. Lett. B, 728, 314-318(2014).
[49] Y. Shen et al. Topological quasiparticles of light: optical skyrmions and beyond(2022).
[53] S. Gao et al. Paraxial skyrmionic beams. Phys. Rev. A, 102, 053513(2020).

Set citation alerts for the article
Please enter your email address