• Bulletin of the Chinese Ceramic Society
  • Vol. 43, Issue 3, 1123 (2024)
CHEN Xi, LIU Ying, and YAN Wen*
Author Affiliations
  • [in Chinese]
  • show less
    DOI: Cite this Article
    CHEN Xi, LIU Ying, YAN Wen. Effect of Sintering Temperature on Microstructure and Properties of Anorthite Insulation Refractory[J]. Bulletin of the Chinese Ceramic Society, 2024, 43(3): 1123 Copy Citation Text show less
    References

    [1] WANG H L, LI Y B, YIN B, et al. Synthesis and application evaluation in lithium battery furnace of mullite insulating refractory bricks from tailings[J]. International Journal of Applied Ceramic Technology, 2023, 20(5): 3237-3245.

    [2] WANG S Y, QI X, QI D B, et al. Study on the properties of periclase-forsterite lightweight heat-insulating refractories for ladle permanent layer[J]. Ceramics International, 2022, 48(14): 20275-20284.

    [4] SEMENOVYKH M A, SKRIPNIKOVA N K, SHEKHOVTSOV V V. High-temperature synthesis of anorthite phase in glass ceramic material[C]//Physical Mesomechanics of Condensed Matter: physical principles of multiscale structure formation and the mechanisms of nonlinear behavior. AIP Conference Proceedings. Tomsk, Russia: AIP Publishing, 2023.

    [5] GUO H S, YANG J L, LI W F, et al. Effects of Al2O3-SiO2 raw material types on properties of anorthite based insulation refractories[J]. Refractories, 2023, 57(4): 286-290 (in Chinese).

    [6] ASHRAF E, SHOKHIDA K, ABDULAZIZ K. Recycling industrial waste into high-performance ceramics[J]. Universum, 2023, 3: 22-26.

    [7] SUTCU M, AKKURT S, BAYRAM A, et al. Production of anorthite refractory insulating firebrick from mixtures of clay and recycled paper waste with sawdust addition[J]. Ceramics International, 2012, 38(2): 1033-1041.

    [8] FU M L, LI C W, WU L H, et al. Fabrication of porous anorthite ceramics by environmental-friendly foam gel-casting method[J]. Journal of the Chinese Ceramic Society, 2022, 50(3): 723-728 (in Chinese).

    [9] LIU J J. Study on the correlation between pore structure and properties of alumina thermal insulation refractory prepared by burnout method[D]. Wuhan: Wuhan University of Science and Technology, 2016: 11-14 (in Chinese).

    [10] LI H A, XU C S, CHEN J T, et al. Effect of different particle sizes and pore-making agent ratio on properties of SiC porous ceramics[J]. Journal of Physics: Conference Series, 2020, 1622(1): 012042.

    [11] LI C W, HAN Y, WU L H, et al. Synthesis and growth of anorthite crystal during in situ preparation of porous anorthite ceramics by foam-gelcasting[J]. International Journal of Applied Ceramic Technology, 2017, 14(5): 957-962.

    [12] HAN Y. Structural design, preparation and properties of anorthite-based porous ceramics[D]. Beijing: Beijing Jiaotong University, 2014: 31-37 (in Chinese).

    [13] GU X Y, MA G H. Studying on the light anorthite type of heat-isolated material[J]. Journal of Ceramics, 1998, 19(3): 144-148 (in Chinese).

    [14] NI W, LIU F M, LI C W. A study of anorthite light refractory brick’s synthesis by using natural minerals[J]. Conributions to Geology and Mineral Resources Research, 1998, 13(2): 1-9 (in Chinese).

    [15] GENG H Y, PAN Z H. Preparation of anorthite lightweight thermal insulation raw bricks by means of chemically foaming process[J]. Bulletin of the Chinese Ceramic Society, 2013, 32(5): 814-818 (in Chinese).

    [16] CHANDRASEKHAR S, RAGHAVAN P, SEBASTIAN G, et al. Brightness improvement studies on ‘kaolin based’ zeolite 4A[J]. Applied Clay Science, 1997, 12(3): 221-231.

    [17] LIU Q, PAN Z H, LI Q B, et al. Preparation of anorthite lightweight thermal insulating brick and the formation process of anorthite[J]. Bulletin of the Chinese Ceramic Society, 2010, 29(6): 1269-1274 (in Chinese).

    [18] LI N, YAN W, LI Y Y. Mullite-high silica glass composites and their applications[C]//Proceedings of the 6th International Conference on Refractories, 2012: 30-33 (in Chinese).

    [19] LI Y Y, LI N, YAN W, et al. Effect of bonding agent on castable properties of lightweight aggregate of mullite-high silica glass composite[C]//Proceedings of the 6th International Conference on Refractories, 2012: 60-62 (in Chinese).

    [20] MIAO Z, LI N, YAN W. Effect of sintering temperature on the phase composition and microstructure of anorthite-mullite-corundum porous ceramics[J]. Ceramics International, 2014, 40(10): 15795-15799.

    [21] SUN X Y, ZHOU J N, YU X X, et al. Calcareous lightweight thermal insulation refractory and its preparation method: CN101781120A[P]. 2010-07-21 (in Chinese).

    [22] LIU J. Study on preparation technology of new anorthite lightweight refractory[D]. Jingdezhen: Jingdezhen Ceramic Institute, 2010: 37-38 (in Chinese).

    [23] PIROGOV A A, RAKINA V P, MIRAK’YAN M M, et al. Anorthite insulating refractory[J]. Refractories, 1970, 11(5/6): 303-307.

    [24] YANG S L, XIAO G Q, DING D H, et al. Thermodynamic analysis of combustion synthesis of calcium aluminate in CaO-Al-Al2O3-CaCO3-O2 system[J]. Journal of the Chinese Ceramic Society, 2016, 44(6): 908-913 (in Chinese).

    [25] QI S J. Preparation of autoclaved brick from waste concrete and waste clay brick[D]. Dalian: Dalian University of Technology, 2021: 27-32 (in Chinese).

    [26] LI Y W, LI N, LI W Z, et al. Synthesis of Al2O3/SiC composite in carbothermal reduction of clay mineral[J]. China Ceramics, 2000, 36(3): 13-15+35 (in Chinese).

    [27] DONG W X, BAO Q F, GU X Y, et al. Effect of preparation process on mechanical properties of anorthite/mullite composites[J]. Journal of Ceramics, 2011, 32(2): 216-220 (in Chinese).

    [28] LI S, ZHANG K, LI Y G. Review on research status of anorthite materials[J]. China Ceramics, 2022, 58(4): 16-21 (in Chinese).

    [29] SHEN C, HUANG Y L, ZHANG Y N, et al. Preparation and properties of anorthite-based ceramics by using metallurgical solid waste and fly ash[J]. International Journal of Applied Ceramic Technology, 2023, 20(4): 2301-2308.

    CHEN Xi, LIU Ying, YAN Wen. Effect of Sintering Temperature on Microstructure and Properties of Anorthite Insulation Refractory[J]. Bulletin of the Chinese Ceramic Society, 2024, 43(3): 1123
    Download Citation