
Search by keywords or author
Journals > > Topics > Optical Resonators
Optical Resonators|3 Article(s)
Effects of the slot width and angular position on the mode splitting in slotted optical microdisk resonator
Lingling Dai, Yiheng Yin, Yanhui Hu, Biyao Yang, and Ming Ding
A novel slotted optical microdisk resonator, which significantly enhances light–matter interaction and provides a promising approach for increasing the sensitivity of sensors, is theoretically and numerically investigated. In this slotted resonator, the mode splitting is generated due to reflection of the slot. Remarkably, effects of the slot width and angular position on the mode splitting are mainly studied. The results reveal that the mode splitting is a second function of the slot width, and the maximum mode splitting induced by the slot deformation is achieved with 2.7853×109 Hz/nm. Therefore, the slotted resonator is an excellent candidate for pressure and force sensing. Besides, the influence of the slot angular position on the mode splitting is a cosine curve with the highest sensitivity of 1.23×1011 Hz/deg ; thus, the optical characteristic demonstrates that the slotted resonator can be used for inertial measurements. A novel slotted optical microdisk resonator, which significantly enhances light–matter interaction and provides a promising approach for increasing the sensitivity of sensors, is theoretically and numerically investigated. In this slotted resonator, the mode splitting is generated due to reflection of the slot. Remarkably, effects of the slot width and angular position on the mode splitting are mainly studied. The results reveal that the mode splitting is a second function of the slot width, and the maximum mode splitting induced by the slot deformation is achieved with 2.7853×109 Hz/nm. Therefore, the slotted resonator is an excellent candidate for pressure and force sensing. Besides, the influence of the slot angular position on the mode splitting is a cosine curve with the highest sensitivity of 1.23×1011 Hz/deg ; thus, the optical characteristic demonstrates that the slotted resonator can be used for inertial measurements.
Photonics Research
- Publication Date: Apr. 17, 2017
- Vol. 5, Issue 3, 03000194 (2017)
High-Q silica microdisk optical resonators with large wedge angles on a silicon chip
Guanyu Li, Pei Liu, Xiaoshun Jiang, Chao Yang, Jiyang Ma, Hongya Wu, and Min Xiao
We experimentally demonstrate high optical quality factor silica microdisk resonators on a silicon chip with large wedge angles by reactive ion etching. For 2-μm-thick microresonators, we have achieved wedge angles of 59°, 63°, 70°, and 79° with optical quality factors of 2.4 × 107, 8.1 × 106, 5.9 × 106, and 7.4 × 106, respectively, from ~80 μmdiameter microresonators in the 1550 nm wavelength band. Also, for 1-μm-thick microresonators, we have obtained an optical quality factor of 7.3 × 106 with a wedge angle of 74°. We experimentally demonstrate high optical quality factor silica microdisk resonators on a silicon chip with large wedge angles by reactive ion etching. For 2-μm-thick microresonators, we have achieved wedge angles of 59°, 63°, 70°, and 79° with optical quality factors of 2.4 × 107, 8.1 × 106, 5.9 × 106, and 7.4 × 106, respectively, from ~80 μmdiameter microresonators in the 1550 nm wavelength band. Also, for 1-μm-thick microresonators, we have obtained an optical quality factor of 7.3 × 106 with a wedge angle of 74°.
Photonics Research
- Publication Date: Jan. 06, 2016
- Vol. 3, Issue 5, 05000279 (2015)
Observation of high-Q optomechanical modes in the mounted silica microspheres
Zhen Shen, Zhong-Hao Zhou, Chang-Ling Zou, Fang-Wen Sun, Guo-Ping Guo, Chun-Hua Dong, and Guang-Can Guo
An efficient method to mount a coupled silica microsphere and tapered fiber system is proposed and demonstrated experimentally. For the purpose of optomechanical studies, high-quality-factor optical (Qo ~ 108) and mechanical modes (Qm ~ 0.87 × 104) are maintained after the mounting process. For the mounted microsphere, the coupling system is more stable and compact and, thus, is beneficial for future studies and applications based on optomechanical interactions. Especially, the packaged optomechanical system, which is tested in a vacuum chamber, paves the way toward quantum optomechanics research in cryostat. An efficient method to mount a coupled silica microsphere and tapered fiber system is proposed and demonstrated experimentally. For the purpose of optomechanical studies, high-quality-factor optical (Qo ~ 108) and mechanical modes (Qm ~ 0.87 × 104) are maintained after the mounting process. For the mounted microsphere, the coupling system is more stable and compact and, thus, is beneficial for future studies and applications based on optomechanical interactions. Especially, the packaged optomechanical system, which is tested in a vacuum chamber, paves the way toward quantum optomechanics research in cryostat.
Photonics Research
- Publication Date: Aug. 24, 2015
- Vol. 3, Issue 5, 05000243 (2015)
Topics