• Optics and Precision Engineering
  • Vol. 19, Issue 2, 463 (2011)
WANG Yu-heng1,2,*, ZHAO Xue-qing1,2, TAN Xiao-li1,2, LIU Feng1,2, and DING Sheng1,2
Author Affiliations
  • 1[in Chinese]
  • 2[in Chinese]
  • show less
    DOI: Cite this Article
    WANG Yu-heng, ZHAO Xue-qing, TAN Xiao-li, LIU Feng, DING Sheng. Similarity and distinction between impulse coupling with aluminum by pulsed ultraviolet laser and by X-ray[J]. Optics and Precision Engineering, 2011, 19(2): 463 Copy Citation Text show less

    Abstract

    To investigate the similarity on thermo-mechanical effects induced by different pulsed beams, and also to give a reference for the experimental research of thermal and mechanical effects under X-ray radiation using simulation method of laser irradiation, the similarity and distinction between impulse coupling with an aluminum target by the pulsed ultraviolet laser(0.308 μm) and X-ray were analyzed. Firstly, the contrast of the mechanism of thermo-mechanical effects between two pulsed beams was compared. Then, a comparative analysis for the quantity of blow-off impulse induced by two pulsed beams coupling with Al materials was performed in lower energy flux (<100 J/cm2) by means of theory and experimental methods. The results show that the generation mechanisms of blow-off impulse are similar in lower energy flux (<100 J/cm2) for the pulsed ultraviolet laser and X-ray, because there are not a phenomenon of plasma shield. The quantity of impulse by these two pulsed beam irradiation has the same order of magnitude of impulse (<102) in same energy flux. Therefore, the two pulsed beam effects are comparable within a certain range.
    WANG Yu-heng, ZHAO Xue-qing, TAN Xiao-li, LIU Feng, DING Sheng. Similarity and distinction between impulse coupling with aluminum by pulsed ultraviolet laser and by X-ray[J]. Optics and Precision Engineering, 2011, 19(2): 463
    Download Citation