Overcoming challenges: advancements in cutting techniques for high strength-toughness alloys in aero-engines

Zhao Biao; Wang Yufeng; Peng Jianhao; Wang Xin; Ding Wenfeng; Lei Xiaofei; Wu Bangfu; Zhang Minxiu; Xu Jiuhua; Zhang Liangchi; Das Raj

doi:10.1088/2631-7990/ad8117

[1] Luo M, Han C and Hafeez H M 2019 Four-axis trochoidal toolpath planning for rough milling of aero-engine blisks Chin. J. Aeronaut.32 2009–16

[2] Kong L F, Cao S, Chin J H, Si Y, Miao F L and Li Y 2020 Vibration suppression of drilling tool system during deep-hole drilling process using independence mode space control Int. J. Mach. Tools Manuf.151 103525

[3] Wang W, Politis N J, Wang Y P, Zhou X Y, Balint D and Jiang J 2022 Solid-state hot forge bonding of aluminium-steel bimetallic gears: deformation mechanisms, microstructure and mechanical properties Int. J. Mach. Tools Manuf.180 103930

[4] Yang Y H, An Y L, Liu X F and Jiang Z Z 2022 A novel process for manufacturing spur gear with uniform microstructure and excellent strength-ductility synergy by warm mold continuous casting J. Mater. Process. Technol.306 117626

[5] Xin S H, Tang X W, Wu J W, Peng F Y, Yan R and Yang W 2023 Investigation of the low-frequency chatter in robotic milling Int. J. Mach. Tools Manuf.190 104048

[6] Liang X L, Liu Z Q, Wang B, Wang C J and Cheung C F 2023 Friction behaviors in the metal cutting process: state of the art and future perspectives Int. J. Extreme Manuf.5 012002

[7] Wang Z Y, Liang Y D, Li H Y and Yu T B 2022 Milling force and tool wear mechanisms on milling TC21 titanium alloy under different lubrication conditions Int. J. Adv. Manuf. Technol.123 169–85

[8] Chen Y Q and Chen T 2022 Study on cutting performance in ultrasonic-assisted milling of titanium alloy with circular-arc milling cutters Int. J. Adv. Manuf. Technol.120 415–25

[9] Li Q Q, Yang Y, Yang Y F, Li P Y, Yang G, Liu J and Wu M X 2022 Enhancing the wear performance of WC-6Co tool by pulsed magnetic field in Ti-6Al-4V machining J. Manuf. Process.80 898–908

[10] Zhu X H, Shi J M, Liu Y H, Jiang Y H, Zhou B W and Zhao X 2022 Study on formation mechanism of serrated chip of Ti-6Al-4V titanium alloy based on shear slip theory Int. J. Adv. Manuf. Technol.122 1353–65

[11] Fazlali M, Ponga M and Jin X L 2022 Predictive model of chip segmentation in machining of high-strength metallic alloys J. Mater. Process. Technol.308 117723

[12] Zhu Z J, Sun J, Li J F and Huang P L 2016 Investigation on the influence of tool wear upon chip morphology in end milling titanium alloy Ti6Al4V Int. J. Adv. Manuf. Technol.83 1477–85

[13] Li J L, Tao Z R, Cai X J, An Q L and Chen M 2020 Experimental and finite element analysis of the formation mechanism of serrated chips of nickel-based superalloy Inconel 718 Int. J. Adv. Manuf. Technol.107 4969–82

[14] Feyzi T and Safavi S M 2013 Improving machinability of Inconel 718 with a new hybrid machining technique Int. J. Adv. Manuf. Technol.66 1025–30

[15] Liu L, Zhang Y L, Guan Y, Jin H, Liu Q F and Liu H 2023 Experimental study on ultrasonic assisted cutting of TB9 titanium alloy Manuf. Technol. Mach. Tool1 44–48

[16] Han X and Zhang D Y 2020 Effects of separating characteristics in ultrasonic elliptical vibration-assisted milling on cutting force, chip, and surface morphologies Int. J. Adv. Manuf. Technol.108 3075–84

[17] Patil S, Joshi S, Tewari A and Joshi S S 2014 Modelling and simulation of effect of ultrasonic vibrations on machining of Ti6Al4V Ultrasonics54 694–705

[18] Pei L and Wu H B 2019 Effect of ultrasonic vibration on ultra-precision diamond turning of Ti6Al4V Int. J. Adv. Manuf. Technol.103 433–40

[19] Wang M H, Li S Y, Zheng Y H and Li X P 2014 Effects of processing parameters on cutting force in ultrasonic vibration milling Chin. Mech. Eng.25 2024–9

[20] Gholamzadeh B and Soleimanimehr H 2019 Finite element modeling of ultrasonic-assisted turning: cutting force and heat generation Mach. Sci. Technol.23 869–85

[21] Xie W B, Wang X K, Liu E B, Wang J, Tang X B, Li G X, Zhang J, Yang L Q, Chai Y B and Zhao B 2022 Research on cutting force and surface integrity of TC18 titanium alloy by longitudinal ultrasonic vibration assisted milling Int. J. Adv. Manuf. Technol.119 4745–55

[22] Sofuolu M A, akr F H, Grgen S, Orak S and Kuhan M C 2018 Numerical investigation of hot ultrasonic assisted turning of aviation alloys J. Braz. Soc. Mech. Sci. Eng.40 122

[23] Duan J W, Zou P, Wang A Q, Wei S Y and Fang R 2023 Research on three-dimensional ultrasonic vibration-assisted turning cutting force J. Manuf. Process.91 167–87

[24] Chen J B, Xu M H, Xie C, Du J K, Dai H F and Fang Q H 2018 A nonuniform moving heat source model for temperature simulation in ultrasonic-assisted cutting of titanium alloys Int. J. Adv. Manuf. Technol.97 3009–21

[25] Niu Y, Jiao F, Zhao B and Gao G F 2019 Investigation of cutting force in longitudinal-torsional ultrasonic-assisted milling of Ti-6Al-4V Materials12 1955

[26] He Y, Zhou Z M, Zou P, Gao X G and Ehmann K F 2019 Study of ultrasonic vibration-assisted thread turning of Inconel 718 superalloy Adv. Mech. Eng.11 1–12

[27] Tan R K, Zhao X S, Zhang S, Zou X C, Guo S S, Hu Z J and Sun T 2019 Study on ultra-precision processing of Ti-6Al-4V with different ultrasonic vibration-assisted cutting modes Mater. Manuf. Process.34 1380–8

[28] Qin S Q, Zhu L D, Qin D G, Yang Z C and Lu H 2024 Tool-workpiece separation characteristic and surface generation in ultrasonic assisted milling Mech. Based Des. Struct. Mach.52 3182–209

[29] Wang J S, Fang F Z, An H J, Wu S, Qi H M, Cai Y X and Guo G Y 2023 Laser machining fundamentals: micro, nano, atomic and close-to-atomic scales Int. J. Extreme Manuf.5 012005

[30] Chang W L, Luo X C, Zhao Q L, Sun J N and Zhao Y 2012 Laser assisted micro grinding of high strength materials Key Eng. Mater.496 44–49

[31] Kim I W and Lee C M 2017 Investigation into the machining characteristics of AISI 1045 steel and Inconel 718 for an ellipsoidal shape using laser-assisted contouring and ramping machining Int. J. Precis. Eng. Manuf.18 1231–8

[32] Zhang Y X and An L B 2018 Research progress on laser assisted machining J. Aerosp. Mater.38 77–85

[33] You K Y, Yan G P, Luo X C, Gilchrist M D and Fang F Z 2020 Advances in laser assisted machining of hard and brittle materials J. Manuf. Process.58 677–92

[34] Singh G, Teli M, Samanta A and Singh R 2013 Finite element modeling of laser-assisted machining of AISID2 tool steel Mater. Manuf. Process.28 443–8

[35] Sun S J, Brandt M and Mo J 2013 Current progresses of laser assisted machining of aerospace materials for enhancing tool life Adv. Mater. Res.690–693 3359–64

[36] Bermingham M J, Kent D and Dargusch M S 2015 A new understanding of the wear processes during laser assisted milling 17–4 precipitation hardened stainless steel Wear328–329 518–30

[37] Oh N S, Woo W S and Lee C M 2018 A study on the machining characteristics and energy efficiency of Ti-6Al-4V in laser-assisted trochoidal milling Int. J. Precis. Eng. Manuf.-Green Technol.5 37–45

[38] Wang Z D, Xu J K, Yu Z J, Liu Q M, Pei Q and Zhai C T 2019. Study on laser-assisted machining of aluminum-based silicon carbide 2019 IEEE Int. Conf. on Manipulation, Manufacturing and Measurement on the Nanoscale (3M-NANO) (IEEE) pp 24–28

[39] Kuila P D and Melkote S 2020 Effect of minimum quantity lubrication and vortex tube cooling on laser-assisted micromilling of a difficult-to-cut steel Proc. Inst. Mech. Eng. B 234 1422–32

[40] Zhao G L, Zhao B, Xin L J, Nian Z W, Peng J H, He N and Xu J H 2024 Nontraditional energy-assisted mechanical machining of difficult-to-cut materials and components in aerospace community: a comparative analysis Int. J. Extreme Manuf.6 022007

[41] Wang H Y, Li C X and Ruan X Y 2001 3-D simulation of the temperature field of laser-assisted machining with FEM J. Shanghai Jiaotong Univ.35 98–101

[42] Zaeh M F, Wiedenmann R and Daub R 2010 A thermal simulation model for laser-assisted milling Phys. Proc.5 353–62

[43] Zamani H, Hermani J P, Sonderegger B and Sommitsch C 2013 3D simulation of laser assisted side milling of Ti6Al4V alloy using modified Johnson-Cook material model Key Eng. Mater.554–557 2054–61

[44] Warap N M, Mohid Z and Rahim E A 2013 Laser assisted machining of titanium alloys Mater. Sci. Forum763 91–106

[45] Sun S, Brandt M, Barnes J E and Dargusch M S 2011 Experimental investigation of cutting forces and tool wear during laser-assisted milling of Ti-6Al-4V alloy Proc. Inst. Mech. Eng. B 225 1512–27

[46] Kim D H and Lee C M 2016 A study on the laser-assisted ball-end milling of difficult-to-cut materials using a new back-and-forth preheating method Int. J. Adv. Manuf. Technol.85 1825–34

[47] Rashid R A R, Bermingham M J, Sun S, Wang G and Dargusch M S 2013 The response of the high strength Ti-10V-2Fe-3Al beta titanium alloy to laser assisted cutting Precis. Eng.37 461–72

[48] Xie Y J 2013 Research on laser assisted cutting of Ti-6Cr-5Mo-5V-4Al alloy Titanium Ind. Prog.30 40

[49] Przestacki D 2014 Conventional and laser assisted machining of composite A359/20SiCpProc. CIRP14 229–33

[50] Kong X J, Meng F B, Liu X L, Hou N, Zheng Y H and Wang M H 2024 Enhancing machinability and removal mechanism of SiCf/SiC composites in laser ablation assisted step milling Ceram. Int.50 34559–72

[51] Samanta A, Teli M and Singh R 2017 Experimental characterization and finite element modeling of the residual stresses in laser-assisted mechanical micromachining of Inconel 625 Proc. Inst. Mech. Eng. B 231 1735–51

[52] Kim E J and Lee C M 2018 A study on the machining characteristics of curved workpiece using laser-assisted milling with different tool paths in Inconel 718 Metals8 968

[53] Khatir F A, Sadeghi M H and Akar S 2021 Investigation of surface roughness in laser-assisted hard turning of AISI 4340 Mater. Today38 3085–90

[54] Xu J K, Du Q and Wang Z C 2018 Study on surface quality of laser assisted high speed turning nickel alloy GH4169 Aerosp. Precis. Manuf. Technol.54 1–5

[55] Zhai C T, Xu J K, Li Y Q, Hou Y G, Yuan S S, Wang X and Liu Q M 2020 Study on surface heat-affected zone and surface quality of Ti-6Al-4V alloy by laser-assisted micro-cutting Int. J. Adv. Manuf. Technol.109 2337–52

[56] Sun G B, Xu J K, Zhai C T, Yu H D, Nie X Y and Tian J W 2021 Study on microstructure and surface microhardness of laser-assisted machining of TB8 titanium alloy 2021 IEEE Int. Conf. on Manipulation, Manufacturing and Measurement on the Nanoscale (3M-NANO) (IEEE) pp 205–9

[57] Xie X J and Zhang X J 2022 Prediction and experimental study of critical cutting speed of white layer formation in LAT hardened steels China Mech. Eng.33 15–23

[58] He Y, Xiao G J, Zhu S W, Liu G, Liu Z Y and Deng Z C 2023 Surface formation in laser-assisted grinding high-strength alloys Int. J. Mach. Tools Manuf.186 104002

[59] El-Taweel T A and Gouda S A 2011 Performance analysis of wire electrochemical turning process-RSM approach Int. J. Adv. Manuf. Technol.53 181–90

[60] Li C P, Xu M R, Yu Z, Huang L, Li S J, Li P N, Niu Q L and Ko T J 2020 Electrical discharge-assisted milling for machining titanium alloy J. Mater. Process. Technol.285 116785

[61] Gong S Q, Sun Y, Jin L Y and Su Z P 2020 Experimental study on fabricating micro-holes in DD5 single-crystal nickel-based superalloy using electrical discharge drilling Arch. Civ. Mech. Eng.20 87

[62] Wang X Z, Li H S, Li J and Ma X 2021 Experimental investigation of high efficiency electrochemical milling into aluminum matrix composite Mech. Build. Autom.50 6–9

[63] Tao J, Xu J K, Ren W F, Deng H R, Hou Y G, Sun H H and Yu H D 2023 Electrochemical machining of blades by using tapered cathode sheet with micro-grooves structure J. Manuf. Process.99 416–33

[64] Li C P, Huang L, Xu M R, Chen Y N, Chen J L, Li S J, Li P N, Choi Y S and Ko T J 2022 Processing mechanism of electrical discharge-assisted milling titanium alloy based on 3D thermal-mechanical coupling cutting model J. Manuf. Process.78 107–19

[65] Liu M Z et al 2021 Cryogenic minimum quantity lubrication machining: from mechanism to application Front. Mech. Eng.16 649–97

[66] Sarikaya M, Gupta M K, Tomaz I, Danish M, Mia M, Rubaiee S, Jamil M, Pimenov D Y and Khanna N 2021 Cooling techniques to improve the machinability and sustainability of light-weight alloys: a state-of-the-art review J. Manuf. Process.62 179–201

[67] Madarkar R, Agarwal S, Attar P, Ghosh S and Rao P V 2018 Application of ultrasonic vibration assisted MQL in grinding of Ti-6Al-4V Mater. Manuf. Process.33 1445–52

[68] Xu W H et al 2022 Electrostatic atomization minimum quantity lubrication machining: from mechanism to application Int. J. Extreme Manuf.4 042003

[69] Chinchanikar S, Kore S S and Hujare P 2021 A review on nanofluids in minimum quantity lubrication machining J. Manuf. Process.68 56–70

[70] Khan M M A, Mithu M A H and Dhar N R 2009 Effects of minimum quantity lubrication on turning AISI 9310 alloy steel using vegetable oil-based cutting fluid J. Mater. Process. Technol.209 5573–83

[71] Ukamanal M, Mishra P C and Sahoo A K 2020 Effects of spray cooling process parameters on machining performance AISI 316 steel: a novel experimental technique Exp. Tech.44 19–36

[72] Tai B L, Stephenson D A, Furness R J and Shih A J 2014 Minimum quantity lubrication (MQL) in automotive powertrain machining Proc. CIRP14 523–8

[73] Liu H G, Ayed Y, Birembaux H, Rossi F and Poulachon G 2022 Impacts of flank wear and cooling strategies on evolutions of built-up edges, diffusion wear and cutting forces in Ti6Al4V machining Tribol. Int.171 107537

[74] de Lacalle Ln L, Prez-Bilbatua J, Snchez J A, Llorente J I, Gutirrez A and Albniga J 2000 Using high pressure coolant in the drilling and turning of low machinability alloys Int. J. Adv. Manuf. Technol.16 85–91

[75] Wang X M et al 2020 Vegetable oil-based nanofluid minimum quantity lubrication turning: academic review and perspectives J. Manuf. Process.59 76–97

[76] Korkmaz M E, Gupta M K, Krolczyk G M, Maruda R W and Li Z X 2021 Effect of nanoparticles as a lubricants in nano-MQL machining of metallic materials: a review Proc. 6th Int. Conf. on Nanotechnology for Instrumentation and Measurement (Nanofim) (IEEE) pp 1–7

[77] He T, Liu N C, Xia H Z, Wu L, Zhang Y, Li D G and Chen Y 2023 Progress and trend of minimum quantity lubrication (MQL): a comprehensive review J. Clean. Prod.386 135809

[78] Allu V P, Raju D L and Ramakrishna S 2019 Performance analysis of cryogenically treated plus tempered carbide inserts in turning of Inconel 718 using cryogenic minimum quantity lubrication cooling technique Proc. Inst. Mech. Eng. J233 1810–9

[79] irin , Yldrm V, Kvak T and Sarkaya M 2021 Performance of cryogenically treated carbide inserts under sustainable cryo-lubrication assisted milling of Inconel X750 alloy Sustain. Mater. Technol.29 e00314

[80] Liu Z Q, An Q L, Xu J Y, Chen M and Han S 2013 Wear performance of (nc-AlTiN)/(a-Si3N4) coating and (nc-AlCrN)/(a-Si3N4) coating in high-speed machining of titanium alloys under dry and minimum quantity lubrication (MQL) conditions Wear305 249–59

[81] Gajrani K K 2020 Assessment of cryo-MQL environment for machining of Ti-6Al-4V J. Manuf. Process.60 494–502

[82] Rubaiee S, Danish M, Gupta M K, Ahmed A, Yahya S M, Yildirim M B, Sarikaya M and Korkmaz M E 2022 Key initiatives to improve the machining characteristics of Inconel-718 alloy: experimental analysis and optimization J. Mater. Res. Technol.21 2704–20

[83] Zhang H P, Zhang Z S, Zheng Z Y and Liu E L 2020 Tool wear in high-speed turning ultra-high strength steel under dry and CMQL conditions Integr. Ferroelectr.206 122–31

[84] Shokrani A, Al-Samarrai I and Newman S T 2019 Hybrid cryogenic MQL for improving tool life in machining of Ti-6Al-4V titanium alloy J. Manuf. Process.43 229–43

[85] Venkatesan K, Mathew A T, Devendiran S, Ghazaly N M, Sanjith S and Raghul R 2019 Machinability study and multi-response optimization of cutting force, surface roughness and tool wear on CNC turned Inconel 617 superalloy using Al2O3 nanofluids in coconut oil Proc. Manuf.30 396–403

[86] Shokrani A, Betts J and Carnevale M 2021 Thermal analysis in MQL end milling operations Proc. CIRP101 358–61

[87] Proud L, Tapoglou N, Wika K K, Taylor C M and Slatter T 2023 Role of CO2 cooling strategies in managing tool wear during the shoulder milling of grade 2 commercially pure titanium Wear524–525 204798

[88] Maruda R W, Szczotkarz N, Wojciechowski S, Gawlik J and Krlczyk G M 2023 Metrological relations between the spray atomization parameters of a cutting fluid and formation of a surface topography and cutting force Measurement219 113255

[89] Niu Q L, Rong J, Jing L, Gao H, Tang S W, Qiu X Y, Liu L P, Wang X H and Dai F P 2023 Study on force-thermal characteristics and cutting performance of titanium alloy milled by ultrasonic vibration and minimum quantity lubrication J. Manuf. Process.95 115–30

[90] Tang C et al 2024 Effects of magnetic intensity on the machining quality and tool damage in nickel-based superalloys subjected to magnetic-assisted cutting J. Mater. Process. Technol.331 118494

[91] Khalil A K, Yip W S, Rehan M and To S 2023 A novel magnetic field assisted diamond turning of Ti-6Al-4V alloy for sustainable ultra-precision machining Mater. Today Commun.35 105829

[92] Xiao J F, Guo F, Zhang C, Chen X, Zhang J G and Xu J F 2022 Experimental investigation for ultra-precision cutting of nickel based superalloy with the assistance of magnetic field Sci. China Technol. Sci.65 2170–7

[93] Sofuoglu M A and akir F H 2022 Improving machining stability of AISI-4140 with magnetic field Proc. Inst. Mech. Eng. C 236 6095–102

[94] Khalil A K, Yip W S and To S 2022 Theoretical and experimental investigations of magnetic field assisted ultra-precision machining of titanium alloys J. Mater. Process. Technol.300 117429

[95] Deswal N and Kant R 2023 Hybrid turning process by interacting ultrasonic vibration and laser energies Mater. Manuf. Process.38 570–6

[96] Dominguez-Caballero J, Ayvar-Soberanis S, Kim J, Roy A, Li L and Curtis D 2023 Hybrid simultaneous laser- and ultrasonic-assisted machining of Ti-6Al-4V alloy Int. J. Adv. Manuf. Technol.125 1903–16

[97] Guo S, Du W, Jiang Q H, Dong Z G and Zhang B 2021 Surface integrity of ultrasonically-assisted milled Ti6Al4V alloy manufactured by selective laser melting Chin. J. Mech. Eng.34 67

[98] Yip W S, To S and Sun Z W 2021 Hybrid ultrasonic vibration and magnetic field assisted diamond cutting of titanium alloys J. Manuf. Process.62 743–52

[99] Dong Y H, Liu J J, Li G Y and Wang Y 2022 Thermodynamic simulation modeling analysis and experimental research of vertical ultrasonic vibration assisted EDM Int. J. Adv. Manuf. Technol.119 5303–14

[100] Kurniawan R, Xu M R, Li C P, Park G C, Kwak Y I, Chen J L and Ko T J 2022 Numerical analysis in ultrasonic elliptical vibration cutting (UEVC) combined with electrical discharge assistance (EDA) for Ti6Al4V Int. J. Adv. Manuf. Technol.120 471–98

[101] Xu M R, Li C P, Kurniawan R, Chen J L, Kwak Y I, Ali S, Choo M K and Ko T J 2022 Ultrasonic and electrical discharge-assisted milling of the Ti-6Al-4V alloy Int. J. Adv. Manuf. Technol.122 1897–917

[102] Cha S I, Lee K H, Ryu H J and Hong S H 2008 Analytical modeling to calculate the hardness of ultra-fine WC-Co cemented carbides Mater. Sci. Eng. A 489 234–44

[103] Wang B X, Wang Z H, Yin Z B, Liu K and Yuan J T 2019 Effects of powder preparation and sintering temperature on consolidation of ultrafine WC-8Co tool material produced by spark plasma sintering Ceram. Int.45 19737–46

[104] Yang Q M, Yang J G, Wen Y, Zhang Q Y, Chen L Y and Chen H 2018 A novel route for the synthesis of ultrafine WC-15 wt %Co cemented carbides J. Alloys Compd.748 577–82

[105] Peng Y, Wang H B, Zhao C, Hu H X, Liu X M and Song X Y 2020 Nanocrystalline WC-Co composite with ultrahigh hardness and toughness Composites B 197 108161

[106] Ganesan G, Malayath G and Mote R G 2022 A review of cutting tools for ultra-precision machining Mach. Sci. Technol.26 923–76

[107] Lindvall R, Bjerke A, Salmasi A, Lenrick F, M'Saoubi R, Sthl J E and Bushlya V 2023 Predicting wear mechanisms of ultra-hard tooling in machining Ti6Al4V by diffusion couples and simulation J. Eur. Ceram. Soc.43 291–303

[108] Rao B, Dandekar C R and Shin Y C 2011 An experimental and numerical study on the face milling of Ti-6Al-4V alloy: tool performance and surface integrity J. Mater. Process. Technol.211 294–304

[109] Wang B X, Wang Z H, Yin Z B, Yuan J T and Jia J H 2020 Preparation and properties of the VC/Cr3C2/TaC doped ultrafine WC-Co tool material by spark plasma sintering J. Alloys Compd.816 152598

[110] Zhou X K, Wang K, Li C S, Wang Q, Wu S and Liu J X 2019 Effect of ultrafine gradient cemented carbides substrate on the performance of coating tools for titanium alloy high speed cutting Int. J. Refract. Met. Hard Mater.84 105024

[111] Ulutan D and Ozel T 2011 Machining induced surface integrity in titanium and nickel alloys: a review Int. J. Mach. Tools Manuf.51 250–80

[112] Lindvall R, Lenrick F, M'Saoubi R, Stahl J E and Bushlya V 2021 Performance and wear mechanisms of uncoated cemented carbide cutting tools in Ti6Al4V machining Wear477 203824

[113] Du Y J, Yue C X, Li X C, Liu X L and Liang S Y 2021 Research on breakage characteristics in side milling of titanium alloy with cemented carbide end mill Int. J. Adv. Manuf. Technol.117 3661–79

[114] Senthil Kumar A, Raja Durai A and Sornakumar T 2006 Wear behaviour of alumina based ceramic cutting tools on machining steels Tribol. Int.39 191–7

[115] Bonhin E P, David-Mzel S, De Souza Candido J V, De Sampaio Alves M C and Ribeiro M V 2019 Effect of machining parameters on turning of VAT32® superalloy with ceramic tool Mater. Manuf. Process.34 800–6

[116] Wang D, Xue C, Cao Y and Zhao J 2017 Fabrication and cutting performance of an Al2O3/TiC/TiN ceramic cutting tool in turning of an ultra-high-strength steel Int. J. Adv. Manuf. Technol.91 1967–76

[117] Yu W W, Ming W W, An Q L and Chen M 2023 Wear behavior of SiAlON ceramic tool and its effects during high-speed cutting Ceram. Int.49 26694–706

[118] Tian X H, Zhao J, Qin W Z, Gong F, Wang Y T and Pan H L 2017 Performance of ceramic tools in high-speed cutting iron-based superalloys Mach. Sci. Technol.21 279–90

[119] Ming W W, Huang X H, Ji M, Xu J Y, Zou F and Chen M 2021 Analysis of cutting responses of Sialon ceramic tools in high-speed milling of FGH96 superalloys Ceram. Int.47 149–56

[120] Khan S A, Soo S L, Aspinwall D K, Sage C, Harden P, Fleming M, White A and M'Saoubi R 2012 Tool wear/life evaluation when finish turning Inconel 718 using PCBN tooling Proc. CIRP1 283–8

[121] Criado V, Daz-lvarez J, Cantero J L and Migulez M H 2018 Study of the performance of PCBN and carbide tools in finishing machining of Inconel 718 with cutting fluid at conventional pressures Proc. CIRP77 634–7

[122] Tlhabadira I, Daniyan I, Masu L and Mpofu K 2020 Computer aided modelling and experimental validation for effective milling operation of titanium alloy (Ti6Al4V) Proc. CIRP91 113–20

[123] Hao Z P, Zhang H and Fan Y H 2023 Cutting performance of the nanotwinned cBN tool in nano-cutting of Ni-Cr-Fe alloy J. Manuf. Process.95 521–34

[124] Slipchenko K, Bushlya V, Stratiichuk D, Petrusha I, Can A, Turkevich V, Sthl J E and Lenrick F 2022 Multicomponent binders for PcBN performance enhancement in cutting tool applications J. Eur. Ceram. Soc.42 4513–27

[125] Sugihara T, Tanaka H and Enomoto T 2017 Development of novel CBN cutting tool for high speed machining of Inconel 718 focusing on coolant behaviors Proc. Manuf.10 436–42

[126] Li G X, Rahim M Z, Pan W C, Wen C E and Ding S L 2020 The manufacturing and the application of polycrystalline diamond tools-A comprehensive review J. Manuf. Process.56 400–16

[127] Childerhouse T, M'Saoubi R, Franca L F P, Crawforth P and Jackson M 2023 Machining performance and wear behaviour of polycrystalline diamond and coated carbide tools during milling of titanium alloy Ti-54M Wear523 204791

[128] Childerhouse T, M'Saoubi R, Franca L, Weston N, Crawforth P and Jackson M 2022 The influence of machining induced surface integrity and residual stress on the fatigue performance of Ti-6Al-4V following polycrystalline diamond and coated cemented carbide milling Int. J. Fatigue163 107054

[129] da Silva L R, da Silva O S, Dos Santos F V, Duarte F J and Veloso G V 2019 Wear mechanisms of cutting tools in high-speed turning of Ti6Al4V alloy Int. J. Adv. Manuf. Technol.103 37–48

[130] Ren Z J, Qu S G, Zhang Y L, Sun F J, Li X Q and Yang C 2019 Machining performance of PCD and PCBN tools in dry turning titanium alloy Ti-6Al-0.6Cr-0.4Fe-0.4Si-0.01B Int. J. Adv. Manuf. Technol.102 2649–61

[131] Lindvall R, Lenrick F, Persson H, M'Saoubi R, Sthl J E and Bushlya V 2020 Performance and wear mechanisms of PCD and pcBN cutting tools during machining titanium alloy Ti6Al4V Wear454–455 203329

[132] Ortiz-Membrado L, Garca-Gonzlez S, Orrit-Prat J, Bonet R, Caro J, de Ara J F, Almandoz E, Llanes L and Jimnez-Piqu E 2023 Improved adhesion of cathodic arc PVDAlCrSiN coating on ion-implanted WC-Co substrates Int. J. Refract. Met. Hard Mater.113 106187

[133] Zhang G Q, Zhang J J, Fan G H, Xu C H and Du J 2023 The effect of chip formation on the cutting force and tool wear in high-speed milling Inconel 718 Int. J. Adv. Manuf. Technol.127 335–48

[134] Sousa V F C, Fernandes F, Silva F J G, Costa R D F S, Sebbe N and Sales-Contini R C M 2023 Wear behavior phenomena of TiN/TiAlN HiPIMS PVD-coated tools on milling Inconel 718 Metals13 684

[135] Jadam T, Datta S and Masanta M 2021 Influence of cutting tool material on machinability of Inconel 718 superalloy Mach. Sci. Technol.25 349–97

[136] Chakravarthy G V, Chandran M, Bhattacharya S S, Rao M S R and Kamaraj M 2012 A comparative study on wear behavior of TiN and diamond coated WC-Co substrates against hypereutectic Al-Si alloys Appl. Surf. Sci.261 520–7

[137] Uddin G M et al 2021 Comparative performance analysis of cemented carbide, TiN, TiAlN, and PCD coated inserts in dry machining of Al 2024 alloy Int. J. Adv. Manuf. Technol.112 1461–81

[138] Liu J, Ma C Y, Tu G Z and Long Y 2016 Cutting performance and wear mechanism of Sialon ceramic cutting inserts with TiCN coating Surf. Coat. Technol.307 146–50

[139] Wada T 2019 Tool wear in intermittent cutting of AISI 304 stainless steel by thermally-sprayed coatings Key Eng. Mater.821 287–93

[140] Tu L Q, Tian S, Xu F, Wang X, Xu C H, He B, Zuo D W and Zhang W J 2020 Cutting performance of cubic boron nitride-coated tools in dry turning of hardened ductile iron J. Manuf. Process.56 158–68

[141] Sheikh-Ahmad J Y 2009 Tool materials and tool wear Machining of Polymer Composites ed J Ahmad (Springer) pp 111–41

[142] Zhu D H, Zhang X M and Ding H 2013 Tool wear characteristics in machining of nickel-based superalloys Int. J. Mach. Tools Manuf.64 60–77

[143] Kumar C S, Urbikain G, De Lucio P F, De Lacalle L N L, Prez-Salinas C, Gangopadhyay S and Fernandes F 2023 Investigating the self-lubricating properties of novel TiSiVN coating during dry turning of Ti6Al4V alloy Wear532–533 205095

[144] Liang X L, Liu Z Q, Wang B, Cai Y K and Ren X P 2023 Progressive mapping surface integrity and multi-objective optimizing surface quality of machining Ti-6Al-4V based novel tool failure criterion CIRP J. Manuf. Sci. Technol.42 81–94

[145] Fan G H, Zhang J J, Zhang G Q, Xu C H and Yi M D 2023 Finite element asnalysis of Ti1−xAlxN coated tools cutting performance and tool wear during Ti-6Al-4V milling J. Mater. Res. Technol.25 166–82

[146] Matuszak J, Zaleski K and Zyko A 2023 Investigation of the impact of high-speed machining in the milling process of titanium alloy on tool wear, surface layer properties, and fatigue life of the machined object Materials16 5361

[147] Filho T K, He Q X, Paiva J M and Veldhuis S C 2023 An analysis of different cutting strategies to improve tool life when machining Ti-5Al-5V-5Mo-3Cr alloy J. Manuf. Process.102 50–66

[148] Wang X Y, Zhang P XX, Niu D, Jt F X L and Qiao Y 2023 Tool wear and surface integrity of -TiAl cryogenic coolant machining at various cutting speed levels Lubricants11 238

[149] Korkmaz M E, Gupta M K, Gnay M, Boy M, Yaar N, Demirsz R, Ross K N S and Abbas Y 2023 Comprehensive analysis of tool wear, surface roughness and chip morphology in sustainable turning of Inconel-601 alloy J. Manuf. Process.103 156–67

[150] Sun J F, Zhang F M and Shen J 2003 Characterizations of ball-milled nanocrystalline WC-Co composite powders and subsequently rapid hot pressing sintered cermets Mater. Lett.57 3140–8

[151] Wang S F, Hsu Y F, Jiang B T, Chao K K, Liao Y L, Liu C Y and Bor H Y 2023 Microstructure and mechanical properties of carbon-precursor-added B4C and B4C-SiC ceramics subjected to pressureless sintering J. Eur. Ceram. Soc.43 4244–54

[152] Mo P C, Chen J R, Zhang Z, Chen C, Pan X Y, Xiao L Y and Lin F 2021 The effect of cBN volume fraction on the performance of PCBN composite Int. J. Refract. Met. Hard Mater.100 105643

[153] Lin Z J, Zhang J Z, Li B S, Wang L P, Mao H K, Hemley R J and Zhao Y S 2011 Superhard diamond/tungsten carbide nanocomposites Appl. Phys. Lett.98 121914

[154] Kong F, Yi M D, Xiao G C, Chen Z Q, Zhang J J, Chen H, Wang L and Xu C H 2022 Mechanical property and cutting performance of CNTs reinforced cBN cutting tools by spark plasma sintering J. Manuf. Process.84 1389–403

[155] Mgret A, Vitry V and Delaunois F 2022 High-energy ball milling of WC-10Co: effect of the milling medium and speed on the mechanical properties Int. J. Refract. Met. Hard Mater.104 105774

[156] Esmaeilzaei A, Sajjadi S A, Beidokhti S M and Beygi H 2019 Rapid consolidation of Al2O3-TiO2-Co nanocermets via spark plasma sintering of Co-coated ceramic particles J. Alloys Compd.771 79–88

[157] Xu X Y, Zheng Y, Zhang G T, Ke Z, Wu H, Yang Z K and Zhou W 2020 Microstructure and mechanical properties of Ti(C, N)-based cermets fabricated using Ni-coated mixed powders Ceram. Int.46 16944–8

[158] Pirso J, Viljus M and Letunovit S 2006 Friction and dry sliding wear behaviour of cermets Wear260 815–24

[159] Yu B H, Jin Y Z, Su W, Zeng S J and Tang X 2023 Production of high-property Cr3C2-based cermet with Cr3C2-10WC composite powder as starting material Mater. Chem. Phys.296 127324

[160] Estevez-Urra A, Llum J, Jerez-Mesa R and Travieso-Rodriguez J A 2020 Monitoring of processing conditions of an ultrasonic vibration-assisted ball-burnishing process Sensors20 2562

[161] Perekos A O, Mordyuk B M, Prokopenko G I, Ruzhitska T V, Efimova T V, Zalutskyi V P and Rud N D 2008 Influence of an alternating magnetic field on process of formation of a solution in a powder 50% Cu + 50% Ni mixture at processing in a ball grinder with use of ultrasound Metallofiz. Noveish. Tekhnol.30 1619–39

[162] Deng X C, Kang X D and Zhang G H 2023 Effects of carbothermal prereduction temperature and Co content on mechanical properties of WC-Co cemented carbides Int. J. Appl. Ceram. Technol.20 2536–47

[163] Deng X C, Lan X, Wang Y L and Zhang G H 2023 Effect of Mo2C on the microstructure and properties of (W, Mo)C-10Co cemented carbides Int. J. Refract. Met. Hard Mater.111 106103

[164] Li M S, Huang C Z, Zhao B, Liu H L, Wang J and Liu Z Q 2017 Mechanical properties and microstructure of Al2O3-TiB2-TiSi2 ceramic tool material Ceram. Int.43 14192–9

[165] Zou B, Zhou H J, Xu K T, Huang C Z, Wang J and Li S S 2014 Study of a hot-pressed sintering preparation of Ti(C7N3)-based composite cermets materials and their performance as cutting tools J. Alloys Compd.611 363–71

[166] Rabouhi H, Eyidi D, Khelfaoui Y and Khireddine A 2023 Microstructural and mechanical characterisation of WC-Co alloys elaborated by liquid phase sintering and hot isostatic pressing: study of WC crystallites size evolution Can. Metall. Q.62 27–35

[167] Adam A A, Bakar H A, Amani U A, Paijan L H, Wahab N A, Mamat M F, Ali M B, Herawan S G and Ahmad Z 2022 Effect of sintering parameters on the mechanical properties and wear performance of alumina inserts Lubricants10 325

[168] Liu J L, Li F X, Yi J H, Liu Y C, Eckert J and Zuo Q S 2023 Microstructure evolution and mechanical properties of functionally graded Fe-8Cr-xNi alloys fabricated by spark plasma sintering Mater. Sci. Eng. A 866 144648

[169] Kojda D, Hofmann T, Gostkowska-Lekner N and Habicht K 2022 Characterization and modeling of the temperature-dependent thermal conductivity in sintered porous silicon-aluminum nanomaterials Nano Res.15 5663–70

[170] Liu J J, Tian C M, Jiang T S, Ricohermoso E I, Yu Z J, Ionescu E, Molina-Luna L, Hofmann J P and Riedel R 2023 Polymer-derived SiOC ceramics: a potential catalyst support controlled by the sintering temperature and carbon content J. Eur. Ceram. Soc.43 3191–200

[171] Stanciu E VI, Boilet J P, L V V and Delaunois F 2023 WC-Co composite made with doped binder: the effect of binder proportion on microstructure and mechanical properties Int. J. Refract. Met. Hard Mater.112 106161

[172] Hu Z Y, Zhang Z H, Cheng X W, Wang F C, Zhang Y F and Li S L 2020 A review of multi-physical fields induced phenomena and effects in spark plasma sintering: fundamentals and applications Mater. Des.191 108662

[173] Chen Z W, Wang Z H, Wang B X, Yuan J T, Huang L and Yin Z B 2021 Microstructure and properties of WC-8Co cemented carbides prepared by multiple spark plasma sintering Int. J. Appl. Ceram. Technol.18 2010–9

[174] Grigoriev S N, Pristinskiy Y, Soe T N, Malakhinsky A, Mosyanov M, Podrabinnik P, Smirnov A and Sols Pinargote N W 2022 Processing and characterization of spark plasma sintered SiC-TiB2-TiC powders Materials15 1946

[175] Li X, Jiang Q Z, Rehman S U, Huang Q F, Chen Y W, Zhao C J and Zhong Z C 2022 Comparisons of the microstructure and magnetic properties of anisotropic NdFeB magnets prepared by hot pressing and spark plasma sintering J. Supercond. Nov. Magn.35 251–9

[176] Sharma A K and Gupta S 2020 Microwave processing of biomaterials for orthopedic implants: challenges and possibilities JOM72 1211–28

[177] Abedi M, Sovizi S, Azarniya A, Giuntini D, Seraji M E, Hosseini H R M, Amutha C, Ramakrishna S and Mukasyan A 2023 An analytical review on spark plasma sintering of metals and alloys: from processing window, phase transformation, and property perspective Crit. Rev. Solid State Mater. Sci.48 169–214

[178] Parihar R S, Gangi Setti S and Sahu R K 2019 Effect of sintering parameters on microstructure and mechanical properties of self-lubricating functionally graded cemented tungsten carbide J. Manuf. Process.45 498–508

[179] Peng J H, Yi M D, Xiao G C, Chen Z Q, Zhang J J, Chen H and Xu C H 2022 Low-temperature and ultrafast dual-powder spark plasma sintering of (W, Ti)C cermets with the addition of metal core-shell nanopowder Int. J. Refract. Met. Hard Mater.107 105901

[180] Wang Z Y, Wang J P, Xu Y S, Yi M D, Xiao G C, Chen Z Q, Zhang J J, Chen H and Xu C H 2022 Microstructure and mechanical properties of (Ti, W)C cermets prepared by ultrafast spark plasma sintering Ceram. Int.48 15613–21

[181] Gutirrez-Gonzlez C F, Suarez M, Pozhidaev S, Rivera S, Peretyagin P, Sols W, Daz L A, Fernandez A and Torrecillas R 2016 Effect of TiC addition on the mechanical behaviour of Al2O3-SiC whiskers composites obtained by SPS J. Eur. Ceram. Soc.36 2149–52

[182] Yi M D, Wang Z Y, Song Y J, Meng Z, Chen Z Q, Xiao G C and Xu C H 2023 Performance gradient distribution of (Ti, W)C cermet by skin effects of high-frequency spark plasma sintering J. Am. Ceram. Soc.106 1443–57

[183] Grigoriev S N, Fedorov S V and Hamdy K 2019 Materials, properties, manufacturing methods and cutting performance of innovative ceramic cutting tools-a review Manuf. Rev.6 27

[184] Chen S N, Fan H Z, Su Y F, Li W S, Li J C, Yan B, Song J J, Hu L T and Zhang Y S 2022 Influence of binder systems on sintering characteristics, microstructures, and mechanical properties of PcBN composites fabricated by SPS J. Adv. Ceram.11 321–30

[185] Kong F, Yi M D, Xiao G C, Chen Z Q, Zhang J J, Chen H, Wang L, Wu J and Xu C H 2022 Synthesis and characterization of cBN-Al2O3-Al cutting tool material by dual power spark plasma sintering Int. J. Refract. Met. Hard Mater.103 105765

[186] Kumar R, Antonov M, Klimczyk P, Mikli V and Gomon D 2022 Effect of cBN content and additives on sliding and surface fatigue wear of spark plasma sintered Al2O3-cBN composites Wear494–495 204250

[187] Balima F, Bellin F, Michau D, Viraphong O, Poulon-Quintin A, Chung U C, Dourfaye A and Largeteau A 2018 High pressure pulsed electric current activated equipment (HP-SPS) for material processing Mater. Des.139 541–8

[188] Jaworska L, Karolus M, Cygan S, Morgiel J, Cyboro J, Laszkiewicz J and Putyra P 2018 Influence of pulsed current during high pressure sintering on crystallite size and phase composition of diamond with Ti-B bonding phase Int. J. Refract. Met. Hard Mater.70 101–6

[189] Guignard J, Prakasam M and Largeteau A 2022 High pressure (HP) in spark plasma sintering (SPS) processes: application to the polycrystalline diamond Materials15 4804

[190] Oghbaei M and Mirzaee O 2010 Microwave versus conventional sintering: a review of fundamentals, advantages and applications J. Alloys Compd.494 175–89

[191] Zhu G Y, Peng Z W, Yang L, Tang H M, Fang X L and Rao M J 2023 Facile preparation of thermal insulation materials by microwave sintering of ferronickel slag and fly ash cenosphere Ceram. Int.49 11978–88

[192] Liu Y, Min F F, Zhu J B and Zhang M X 2012 Effect of nanometer Al2O3 powder on microstructure and properties of alumina ceramics by microwave sintering Mater. Sci. Eng. A 546 328–31

[193] Agrawal D 2010 Microwave sintering of ceramics, composites and metal powders Sintering of Advanced Materials ed Z G Fang (Woodhead Publishing) pp 222–48

[194] Bao R, Yi J H, Peng Y D, Li F X, Li S and Li S Y 2022 Skin effect of WC-8 wt% Co alloy by microwave sintering Rare Met.41 1364–8

[195] Tapaszt O, Kun P, Wber F, Gergely G, Balzsi K, Pfeifer J, Arat P, Kidari A, Hampshire S and Balzsi C 2011 Silicon nitride based nanocomposites produced by two different sintering methods Ceram. Int.37 3457–61

[196] Xu W W, Yuan J T, Yin Z B, Chen M D and Wang Z H 2018 Effect of metal phases on microstructure and mechanical properties of Si3N4-based ceramic tool materials by microwave sintering Ceram. Int.44 19872–8

[197] Singh R and Sharma V 2022 Experimental investigation for cutting performance of cemented carbide cutting insert developed through microwave sintering Int. J. Refract. Met. Hard Mater.106 105867

[198] Qiao L, Wang Z H, Lu T Y and Yuan J T 2019 Effects of microwave sintering temperature and holding time on mechanical properties and microstructure of Si3N4/n-SiC ceramics Materials12 3837

[199] Wu J K et al 2022 High pressure synthesis of tungsten carbide-cubic boron nitride (WC-cBN) composites: effect of thermodynamic condition and cBN volume fraction on their microstructure and properties J. Eur. Ceram. Soc.42 4503–12

[200] Yue Y X, Zhu Y M and Li Z H 2023 Preparation and cutting performance study of YSZ-toughened PcBN superhard tools RSC Adv.13 15616–23

[201] Jiang Z L, Jian Q, Han Y, Zhu Y M and Li Z H 2020 Performance evaluation of cBN-Ti3AlC2-Al composites fabricated by HTHP method Ceram. Int.46 24449–53

[202] Ma G L et al 2023 A new high pressure and high temperature synthesis idea: preparation of micron polycrystalline transparent cubic boron nitride Int. J. Refract. Met. Hard Mater.113 106194

[203] de Medeiros R B D, Gurgel D P, de Paiva Barreto L P, Mashhadikarimi M, Filgueira M and Gomes U U 2022 Tribological behavior of polycrystalline diamond-tantalum composites Int. J. Refract. Met. Hard Mater.102 105711

[204] Chen Z R, Ma D J, Wang S M, Dai W H, Zhu P W, Zhu Y Q and Liu B C 2020 Wear resistance and thermal stability enhancement of PDC sintered with Ti-coated diamond and cBN Int. J. Refract. Met. Hard Mater.92 105278

[205] Laurindo Q M G, Rosa J M B, da Silva Guimares R, Lugon R D, Xing Y T, Lima L S and Filgueira M 2023 Molybdenum as a new binder for polycrystalline diamond (PCD) prepared by HPHT sintering Ceram. Int.49 17313–22

[206] Jian Q, Jiang Z L, Han Y, Zhu Y M and Li Z H 2020 Fabrication and evaluation of mechanical properties of polycrystalline diamond reinforced with carbon-nanotubes by HPHT sintering Ceram. Int.46 21527–32

[207] Ni P S, Zhao Z, Yang W X, Deng X, Wu S H, Qu Z and Jin F 2023 Effect of feedstock diamond powder property on microstructure and mechanical properties of polycrystalline diamond compacts Int. J. Refract. Met. Hard Mater.111 106102

[208] Mashhadikarimi M, Medeiros R B D, Barreto L P P, Gurgel D P, Gomes U U and Filgueira M 2021 Development of a novel triple-layer polycrystalline diamond compact Diam. Relat. Mater.111 108182

[209] Li Q, Zhan G D, Li D, He D W, Moellendick T E, Gooneratne C P and Alalsayednassir A G 2020 Ultrastrong catalyst-free polycrystalline diamond Sci. Rep.10 22020

[210] Huang W H and Yan J W 2023 Effect of tool geometry on ultraprecision machining of soft-brittle materials: a comprehensive review Int. J. Extreme Manuf.5 012003

[211] Wang F J, Yan J B, Zhao M, Wang D, Wang X N and Hao J X 2020 Surface damage reduction of dry milling carbon fiber reinforced plastic/polymer using left-right edge milling tool J. Reinf. Plast. Compos.39 409–21

[212] Feng X M, Meng C, Lian W, Fan X W and Wei J X 2023 Optimization analysis of microtexture size parameters of tool surface for turning GH4169 Ferroelectrics607 186–207

[213] Denkena B, Michaelis A, Herrmann M, Ptschke J, Krdel A, Vornberger A and Picker T 2020 Influence of tool material properties on the wear behavior of cemented carbide tools with rounded cutting edges Wear456–457 203395

[214] Bao X Y, Yao P, Xu J M, Mei Z W, Li Y M, Yang J, Wang Q W, Chen Z, Qu S S and Huang C Z 2023 Effect of tool geometry and cutting parameters on surface quality and chip morphology of amorphous electroless nickel-phosphorus alloy in ultra-precision turning Int. J. Adv. Manuf. Technol.126 2461–78

[215] Ji J H, Yang Q, Chen P, Lu K J and Wu Y H 2021 An improved mathematical model of cutting temperature in end milling Al7050 based on the influence of tool geometry parameters and milling parameters Math. Probl. Eng.2021 5705091

[216] Zhang H J, Sun C Y, Liua M and Gao F S 2018 Analysis of the optimization of tool geometric parameters for milling of Inconel718 IOP Conf. Ser.: Mater. Sci. Eng.423 012030

[217] Ma J W, Jia Z Y, He G Z, Liu Z, Zhao X X and Qin F Z 2019 Influence of cutting tool geometrical parameters on tool wear in high-speed milling of Inconel 718 curved surface Proc. Inst. Mech. Eng. B 233 18–30

[218] Zhang Y H, Sun T and Song W B 2022 Parameter optimization of ball-end milling cutter with blunt-round edge and micro-texture on flank Ferroelectrics593 132–44

[219] Zhang K D, Deng J X, Xing Y Q, Li S P and Gao H H 2015 Effect of microscale texture on cutting performance of WC/Co-based TiAlN coated tools under different lubrication conditions Appl. Surf. Sci.326 107–18

[220] Khani S, Razfar M R, Haghighi S S and Farahnakian M 2020 Optimization of microtextured tools parameters in thread turning process of aluminum 7075 aerospace alloy Mater. Manuf. Process.35 1330–8

[221] Baumann J, Krebs E and Biermann D 2019 Chatter avoidance in milling by using advanced cutting tools with structured functional surfaces MM Sci. J.4 3019–26

[222] Jin T Y, Ma M D, Li B Z, Gao Y F, Zhao Q L, Zhao Z S, Chen J Y and Tian Y J 2020 Mechanical polishing of ultrahard nanotwinned diamond via transition into hard sp2-sp3 amorphous carbon Carbon161 1–6

[223] Bergs T, Schneider S A M, Amara M and Ganser P 2020 Preparation of symmetrical and asymmetrical cutting edges on solid cutting tools using brushing tools with filament-integrated diamond grits Proc. CIRP93 873–8

[224] Deng J X, Song W L and Zhang H 2009 Design, fabrication and properties of a self-lubricated tool in dry cutting Int. J. Mach. Tools Manuf.49 66–72

[225] Chen S T, Chen C H and Chang C H 2019 Study of high-frequency microspark-erosion of boron-doped polycrystalline diamond Diam. Relat. Mater.94 155–61

[226] Galindo-Fernandez M, Diver C and Leahy W 2016 The prediction of surface finish and cutting speed for wire electro-discharge machining of polycrystalline diamond Proc. CIRP42 297–304

[227] Kuo C L, Lin X C and Yeh T 2023 Working towards the minimum surface damages and failure analysis of Joule heat effects in manufacturing diamond cutting tools Eng. Fail. Anal.152 107432

[228] Vopt T, Podhorsk , Sahul M and Harni M 2019 Cutting edge preparation of cutting tools using plasma discharges in electrolyte J. Manuf. Process.46 234–40

[229] Eberle G, Dold C and Wegener K 2015 Laser fabrication of diamond micro-cutting tool-related geometries using a high-numerical aperture micro-scanning system Int. J. Adv. Manuf. Technol.81 1117–25

[230] Suzuki H, Okada M, Asai W, Sumiya H, Harano K, Yamagata Y and Miura K 2017 Micro milling tool made of nano-polycrystalline diamond for precision cutting of SiC CIRP Ann.66 93–96

[231] Yang S C, Wang T J, Ren W and Su S 2020 Micro-texture design criteria for cemented carbide ball-end milling cutters J. Mech. Sci. Technol.34 127–36

[232] Gupta M K, Song Q H, Liu Z Q, Singh R, Sarikaya M and Khanna N 2021 Tribological behavior of textured tools in sustainable turning of nickel based super alloy Tribol. Int.155 106775

[233] Jain V K, Balasubramaniam R, Mote R G, Das M, Sharma A, Kumar A, Garg V and Kamaliya B 2020 Micromachining: an overview (part I) J. Micromanuf.3 142–58

[234] Maeng S, Ito H, Kakinuma Y and Min S 2023 Study on cutting force and tool wear in machining of die materials with textured PCD tools under ultrasonic elliptical vibration Int. J. Precis. Eng. Manuf.-Green Technol.10 35–44

[235] Jung S T et al 2021 A study on focused ion beam (FIB) milling machining and fabrication technology of nano-scale diamond tool for machining fine-patterns in a free-form surfaces J. Nanosci. Nanotechnol.21 4735–9

[236] Ha S J, Yoon S J, Baek S Y and Jung S T 2023 A study on the development of sub-micron single-crystal diamond tools for machining diffractive optical elements Int. J. Adv. Manuf. Technol.126 4399–406

[237] Kim G M, Kim B H and Chu C N 2003 Estimation of cutter deflection and form error in ball-end milling processes Int. J. Mach. Tools Manuf.43 917–24

[238] Toubhans B, Viprey F, Fromentin G, Karaouni H and Dorlin T 2021 Study of phenomena responsible for part distortions when turning thin Inconel 718 workpieces J. Manuf. Process.61 46–55

[239] Wei Y and Wang X W 2007 Computer simulation and experimental study of machining deflection due to original residual stress of aerospace thin-walled parts Int. J. Adv. Manuf. Technol.33 260–5

[240] Chen N, Zhao J Y, Wang R K, Yan B, Wu Y, Li L, Yu N and He N 2024 Inhibition effect of covalent carbon nanosheets on mechanochemical wear of diamond Mater. Des.237 112573

[241] Li X Y, Li L, Yang Y F, Zhao G L, He N, Ding X C, Shi Y W, Fan L X, Lan H and Jamil M 2020 Machining deformation of single-sided component based on finishing allowance optimization Chin. J. Aeronaut.33 2434–44

[242] Chen N, Liu J W, He N, Xiao X Z, Zhao J Y, Jia Y B and Yu N 2024 Fabrication of high aspect ratio grooves on aluminium nitride by laser and chemical milling enhanced micro milling J. Mater. Process. Technol.325 118299

[243] Liao Y J G and Hu S J 2000 Flexible multibody dynamics based fixture-workpiece analysis model for fixturing stability Int. J. Mach. Tools Manuf.40 343–62

[244] Cerutti X and Mocellin K 2015 Parallel finite element tool to predict distortion induced by initial residual stresses during machining of aeronautical parts Int. J. Mater. Form.8 255–68

[245] Yang Y, Li M and Li K R 2014 Comparison and analysis of main effect elements of machining distortion for aluminum alloy and titanium alloy aircraft monolithic component Int. J. Adv. Manuf. Technol.70 1803–11

[246] Masoudi S, Amini S, Saeidi E and Eslami-Chalander H 2015 Effect of machining-induced residual stress on the distortion of thin-walled parts Int. J. Adv. Manuf. Technol.76 597–608

[247] Karsten O, Grote C, Schimanski K, von Hehl A and Zoch H W 2010 Optimized processing for distortion control in milling of Al-Zn-Mg alloys Proc. 12th International Conf. Aluminum Alloys (The Japan Institute of Light Metals) pp 1261–6

[248] Akhtar W, Lazoglu I and Liang S Y 2022 Prediction and control of residual stress-based distortions in the machining of aerospace parts: a review J. Manuf. Process.76 106–22

[249] Huang X M, Sun J and Li J F 2015 Finite element simulation and experimental investigation on the residual stress-related monolithic component deformation Int. J. Adv. Manuf. Technol.77 1035–41

[250] Quintana G and Ciurana J 2011 Chatter in machining processes: a review Int. J. Mach. Tools Manuf.51 363–76

[251] Sun Y W, Zheng M, Jiang S L, Zhan D N and Wang R Q 2023 A state-of-the-art review on chatter stability in machining thin-Walled parts Machines11 359

[252] Li Z Y, Sun Y W and Guo D M 2017 Chatter prediction utilizing stability lobes with process damping in finish milling of titanium alloy thin-walled workpiece Int. J. Adv. Manuf. Technol.89 2663–74

[253] Lim E M and Menq C H 1995 The prediction of dimensional error for sculptured surface productions using the ball-end milling process. Part 2: surface generation model and experimental verification Int. J. Mach. Tools Manuf.35 1171–85

[254] Agarwal A and Desai K A 2020 Predictive framework for cutting force induced cylindricity error estimation in end milling of thin-walled components Precis. Eng.66 209–19

[255] Wimmer S and Zaeh M F 2018 The prediction of surface error characteristics in the peripheral milling of thin-walled structures J. Manuf. Mater. Process.2 13

[256] Zhang J, Lin B, Fei J X, Huang T, Xiao J L, Zhang X F and Ji C H 2018 Modeling and experimental validation for surface error caused by axial cutting force in end-milling process Int. J. Adv. Manuf. Technol.99 327–35

[257] Liu X W, Cheng K, Webb D and Luo X C 2002 Prediction of cutting force distribution and its influence on dimensional accuracy in peripheral milling Int. J. Mach. Tools Manuf.42 791–800

[258] Liu S M, Shao X D, Ge X B and Wang D 2017 Simulation of the deformation caused by the machining cutting force on thin-walled deep cavity parts Int. J. Adv. Manuf. Technol.92 3503–17

[259] Ge G Y, Du Z C and Yang J G 2020 Rapid prediction and compensation method of cutting force-induced error for thin-walled workpiece Int. J. Adv. Manuf. Technol.106 5453–62

[260] D'Alvise L, Chantzis D, Schoinochoritis B and Salonitis K 2015 Modelling of part distortion due to residual stresses relaxation: an aeronautical case study Proc. CIRP31 447–52

[261] Werke M, Wretland A, Ottosson P, Holmberg J, Machens M and Semere D 2018 Geometric distortion analysis using a combination of the contour method and machining simulation Proc. CIRP72 1481–6

[262] Zhang Z X, Zhang Z, Zhang D H and Luo M 2020 Milling distortion prediction for thin-walled component based on the average MIRS in specimen machining Int. J. Adv. Manuf. Technol.111 3379–92

[263] Yao C F, Zhang J Y, Cui M C, Tan L and Shen X H 2020 Machining deformation prediction of large fan blades based on loading uneven residual stress Int. J. Adv. Manuf. Technol.107 4345–56

[264] Sun Y W and Jiang S L 2018 Predictive modeling of chatter stability considering force-induced deformation effect in milling thin-walled parts Int. J. Mach. Tools Manuf.135 38–52

[265] Li W T, Wang L P and Yu G 2022 Chatter prediction in flank milling of thin-walled parts considering force-induced deformation Mech. Syst. Signal Process.165 108314

[266] Song Q H, Shi J H, Liu Z Q and Wan Y 2017 A time-space discretization method in milling stability prediction of thin-walled component Int. J. Adv. Manuf. Technol.89 2675–89

[267] Shi J H, Song Q H, Liu Z Q and Ai X 2017 A novel stability prediction approach for thin-walled component milling considering material removing process Chin. J. Aeronaut.30 1789–98

[268] Yue C X, Xie Z L, Liu X L and Zhao M W 2022 Chatter prediction of milling process for titanium alloy thin-walled workpiece based on EMD-SVM J. Adv. Manuf. Sci. Technol.2 2022010

[269] Law K M Y and Geddam A 2003 Error compensation in the end milling of pockets: a methodology J. Mater. Process. Technol.139 21–27

[270] Chen W F, Xue J B, Tang D B, Chen H and Qu S P 2009 Deformation prediction and error compensation in multilayer milling processes for thin-walled parts Int. J. Mach. Tools Manuf.49 859–64

[271] Gao Y Y, Ma J W, Jia Z Y, Wang F J, Si L K and Song D N 2016 Tool path planning and machining deformation compensation in high-speed milling for difficult-to-machine material thin-walled parts with curved surface Int. J. Adv. Manuf. Technol.84 1757–67

[272] Soori M 2023 Deformation error compensation in 5-Axis milling operations of turbine blades J. Braz. Soc. Mech. Sci. Eng.45 289

[273] Li B Z, Jiang X H, Yang J G and Liang S Y 2015 Effects of depth of cut on the redistribution of residual stress and distortion during the milling of thin-walled part J. Mater. Process. Technol.216 223–33

[274] Jiang X H, Li B Z, Yang J G and Zuo X Y 2013 Effects of tool diameters on the residual stress and distortion induced by milling of thin-walled part Int. J. Adv. Manuf. Technol.68 175–86

[275] Guo M X, Jiang X H, Ye Y, Ding Z S and Zhang Z Y 2019 Investigation of redistribution mechanism of residual stress during multi-process milling of thin-walled parts Int. J. Adv. Manuf. Technol.103 1459–66

[276] Zhu P Z, Liu Z Q, Ren X P and Cai Y K 2022 Machining distortion for thin-walled superalloy GH4169 caused by residual stress and manufacturing sequences Metals12 1460

[277] Hao X Z, Li Y G, Chen G X and Liu C Q 2018 6+X locating principle based on dynamic mass centers of structural parts machined by responsive fixtures Int. J. Mach. Tools Manuf.125 112–22

[278] Zhang Z X, Luo M, Tang K and Zhang D H 2020 A new in-processes active control method for reducing the residual stresses induced deformation of thin-walled parts J. Manuf. Process.59 316–25

[279] Bravo U, Altuzarra O, de Lacalle Ln L, Snchez J A and Campa F J 2005 Stability limits of milling considering the flexibility of the workpiece and the machine Int. J. Mach. Tools Manuf.45 1669–80

[280] Zhan D N, Li S K, Jiang S L and Sun Y W 2022 Optimal pitch angles determination of ball-end cutter for improving five-axis milling stability J. Manuf. Process.84 832–46

[281] Bediaga I, Zatarain M, Muoa J and Lizarralde R 2011 Application of continuous spindle speed variation for chatter avoidance in roughing milling Proc. Inst. Mech. Eng. B 225 631–40

[282] Fei J X, Lin B, Xiao J L, Ding M, Yan S, Zhang X F and Zhang J 2018 Investigation of moving fixture on deformation suppression during milling process of thin-walled structures J. Manuf. Process.32 403–11

[283] Dang X B, Wan M, Zhang W H and Yang Y 2021 Chatter analysis and mitigation of milling of the pocket-shaped thin-walled workpieces with viscous fluid Int. J. Mech. Sci.194 106214

[284] Zhang Y M and Sims N D 2005 Milling workpiece chatter avoidance using piezoelectric active damping: a feasibility study Smart Mater. Struct.14 N65–N70

[285] Shen Y J, Ren J J, Huang N D, Zhang Y, Zhang X Q and Zhu L M 2023 Surface form inspection with contact coordinate measurement: a review Int. J. Extreme Manuf.5 022006

[286] Zhao B et al 2023 Collaborative manufacturing technologies of structure shape and surface integrity for complex thin-walled components of aero-engine: status, challenge and tendency Chin. J. Aeronaut.36 1–24

[287] Ortiz A L, Tian J W, Villegas J C, Shaw L L and Liaw P K 2008 Interrogation of the microstructure and residual stress of a nickel-base alloy subjected to surface severe plastic deformation Acta Mater.56 413–26

[288] Felh C, Nagy A and Kundrk J 2020. Effect of shape of cutting edge on face milled surface topography Proc. Int. Symposium for Production Research 2019 ed N M Durakbasa and M G Genylmaz (Springer) pp 525–34

[289] Buj-Corral I, Vivancos-Calvet J and Domnguez-Fernndez A 2012 Surface topography in ball-end milling processes as a function of feed per tooth and radial depth of cut Int. J. Mach. Tools Manuf.53 151–9

[290] Gao Y, Sun R L, Chen Y N and Leopold J 2016 Analysis of chip morphology and surface topography in modulation assisted machining Int. J. Mech. Sci.111–112 88–100

[291] Chen Z T, Yue C X, Liu X L, Liang S Y, Wei X D and Du Y J 2021 Surface topography prediction model in milling of thin-walled parts considering machining deformation Materials14 7679

[292] Chen T, Qiu C Z and Liu X L 2017 Study on 3D topography of machined surface in high-speed hard cutting with PCBN tool Int. J. Adv. Manuf. Technol.91 2125–33

[293] Ning J S and Zhu L D 2019 Parametric design and surface topography analysis of turbine blade processing by turn-milling based on CAM Int. J. Adv. Manuf. Technol.104 3977–90

[294] Tan L, Yao C F, Ren J X and Zhang D H 2017 Effect of cutter path orientations on cutting forces, tool wear, and surface integrity when ball end milling TC17 Int. J. Adv. Manuf. Technol.88 2589–602

[295] Zhou J M, Bushlya V and Stahl J E 2012 An investigation of surface damage in the high speed turning of Inconel 718 with use of whisker reinforced ceramic tools J. Mater. Process. Technol.212 372–84

[296] Liao Z R, Polyakov M, Diaz O G, Axinte D, Mohanty G, Maeder X, Michler J and Hardy M 2019 Grain refinement mechanism of nickel-based superalloy by severe plastic deformation-mechanical machining case Acta Mater.180 2–14

[297] Ding R G, Knaggs C, Li H Y, Li Y G and Bowen P 2020 Characterization of plastic deformation induced by machining in a Ni-based superalloy Mater. Sci. Eng. A 778 139104

[298] Du J, Liu Z Q and Lv S Y 2014 Deformation-phase transformation coupling mechanism of white layer formation in high speed machining of FGH95 Ni-based superalloy Appl. Surf. Sci.292 197–203

[299] Brown M, M'Saoubi R, Crawforth P, Mantle A, McGourlay J and Ghadbeigi H 2022 On deformation characterisation of machined surfaces and machining-induced white layers in a milled titanium alloy J. Mater. Process. Technol.299 117378

[300] Liang X L, Liu Z Q and Wang B 2020 Dynamic recrystallization characterization in Ti-6Al-4V machined surface layer with process-microstructure-property correlations Appl. Surf. Sci.530 147184

[301] Wang Q Q and Liu Z Q 2016 Plastic deformation induced nano-scale twins in Ti-6Al-4V machined surface with high speed machining Mater. Sci. Eng. A 675 271–9

[302] Fan Y H, Wang W Y, Hao Z P and Zhan C Y 2020 Work hardening mechanism based on molecular dynamics simulation in cutting Ni-Fe-Cr series of Ni-based alloy J. Alloys Compd.819 153331

[303] Yao C F, Tan L, Ren J X, Lin Q and Liang Y S 2014 Surface integrity and fatigue behavior for high-speed milling Ti-10V-2Fe-3Al titanium alloy J. Fail. Anal. Prev.14 102–12

[304] Wang X Y, Huang C Z, Zou B, Liu G L, Zhu H T and Wang J 2018 Experimental study of surface integrity and fatigue life in the face milling of Inconel 718 Front. Mech. Eng13 243–50

[305] Yang D, Liu Z Q, Xiao X and Xie F 2018 The effects of machining-induced surface topography on fatigue performance of titanium alloy Ti-6Al-4V Proc. CIRP71 27–30

[306] Moussaoui K, Mousseigne M, Senatore J and Chieragatti R 2015 The effect of roughness and residual stresses on fatigue life time of an alloy of titanium Int. J. Adv. Manuf. Technol.78 557–63

[307] Li Y J, Xuan F Z, Wang Z D and Tu S T 2010 Effects of residual stresses on the high cycle fatigue behavior of Ti-6Al-4V ASME 2010 Pressure Vessels and Piping Division/K-PVP Conf. (ASME) pp 397–401

[308] Du D X, Liu D X, Sun Y F, Tang J G and Zhang X H 2012 The effects of machined workpiece surface integrity on the fatigue life of TC21 titanium alloy Adv. Mater. Res.503–504 382–9

[309] Novovic D, Dewes R C, Aspinwall D K, Voice W and Bowen P 2004 The effect of machined topography and integrity on fatigue life Int. J. Mach. Tools Manuf.44 125–34

[310] Lu X H, Jia Z Y, Wang H, Feng Y X and Liang S Y 2019 The effect of cutting parameters on micro-hardness and the prediction of Vickers hardness based on a response surface methodology for micro-milling Inconel 718 Measurement140 56–62

[311] Yang S C, Han P, Su S, Zhang N S and Ren W 2021 Study on surface work hardening of titanium alloy milled by micro-textured ball milling cutter Int. J. Adv. Manuf. Technol.112 2497–508

[312] Hassanpour H, Rasti A, Sadeghi M H and Khosrowshahi J H 2020 Investigation of roughness, topography, microhardness, white layer and surface chemical composition in high speed milling of Ti-6Al-4V using minimum quantity lubrication Mach. Sci. Technol.24 719–38

[313] Liu Y H, Geng D X, Zhang D Y, Zhai Y D, Liu L X, Sun Z F, Shao Z Y, Zhang M L and Jiang X G 2023 Cutting performance and surface integrity for rotary ultrasonic elliptical milling of Inconel 718 with the ball end milling cutter J. Mater. Process. Technol.319 118094

[314] Sarkaya M, Gupta M K, Tomaz I, Pimenov D Y, Kuntolu M, Khanna N, v Y and Krolczyk G M 2021 A state-of-the-art review on tool wear and surface integrity characteristics in machining of superalloys CIRP J. Manuf. Sci. Technol.35 624–58

[315] He C L, Yan J W, Wang S Q, Zhang S, Chen G and Ren C Z 2023 A theoretical and deep learning hybrid model for predicting surface roughness of diamond-turned polycrystalline materials Int. J. Extreme Manuf.5 035102

[316] Chen Y L, Wu W L and Dai H F 2023 Overview of titanium alloy cutting based on machine learning Int. J. Adv. Manuf. Technol.126 4749–62

[317] Nasir V and Sassani F 2021 A review on deep learning in machining and tool monitoring: methods, opportunities, and challenges Int. J. Adv. Manuf. Technol.115 2683–709

[318] Serin G, Sener B, Ozbayoglu A M and Unver H O 2020 Review of tool condition monitoring in machining and opportunities for deep learning Int. J. Adv. Manuf. Technol.109 953–74

[319] Wang M and Wang J 2012 CHMM for tool condition monitoring and remaining useful life prediction Int. J. Adv. Manuf. Technol.59 463–71

[320] Rubin V H S, da Silva L R R, Okada K F, de Souza F C R, Pimenov D Y, Gravalos M T and Machado A R 2023 Process monitoring of the AISID6 steel turning using artificial neural networks Int. J. Adv. Manuf. Technol.127 3569–84

[321] Bagga P J, Patel K M, Makhesana M A, , Khanna N, Krolczyk G M, Pala A D and Chauhan K C 2023 Machine vision-based gradient-boosted tree and support vector regression for tool life prediction in turning Int. J. Adv. Manuf. Technol.126 471–85

[322] Qin B, Wang Y Q, Liu K, Jiang S W and Luo Q 2023 A novel online tool condition monitoring method for milling titanium alloy with consideration of tool wear law Mech. Syst. Signal Process.199 110467

[323] Marousi M, Rimpault X, Turenne S and Balazinski M 2023 Initial tool wear and process monitoring during titanium metal matrix composite machining (TiMMC) J. Manuf. Process.86 208–20

[324] Tan Q F, Tong H and Li Y 2023 Drilling force prediction and drill wear monitoring for PCB drilling process based on spindle current signal Int. J. Adv. Manuf. Technol.126 3475–87

[325] Liu T S, Wang Q and Wang W S 2022 Micro-milling tool wear monitoring via nonlinear cutting force model Micromachines13 943

[326] Liu D L, Liu Z Q, Zhao J F, Song Q H, Ren X P and Ma H F 2022 Tool wear monitoring through online measured cutting force and cutting temperature during face milling Inconel 718 Int. J. Adv. Manuf. Technol.122 729–40

[327] Han J H, Liu Z Y, Cao K W, Xu L, Shi T L and Liao G L 2022 Cutting temperature measurement in turning using fiber-optic multi-spectral radiation thermometry and its application in tool wear status recognition Measurement198 111413

[328] Zou Z, Gao X, Lei S C, Zhang H, Min R C and Yang Y 2024 Development of tool wear condition on-line monitoring method for impeller milling based on new data processing approach and DAE-BP-ANN-integrated modeling Proc. Inst. Mech. Eng. B 238 124–36

[329] Jamshidi M, Chatelain J F, Rimpault X and Balazinski M 2022 Tool condition monitoring based on the fractal analysis of current and cutting force signals during CFRP trimming Int. J. Adv. Manuf. Technol.121 8127–42

[330] Zhou Z D, Yao B T, Xu W J and Wang L H 2017 Condition monitoring towards energy-efficient manufacturing: a review Int. J. Adv. Manuf. Technol.91 3395–415

[331] Hegab H A, Darras B and Kishawy H A 2018 Towards sustainability assessment of machining processes J. Clean. Prod.170 694–703

[332] Said Z, Gupta M, Hegab H, Arora N, Khan A M, Jamil M and Bellos E 2019 A comprehensive review on minimum quantity lubrication (MQL) in machining processes using nano-cutting fluids Int. J. Adv. Manuf. Technol.105 2057–86

[333] Mia M, Gupta M K, Singh G, Krlczyk G and Pimenov D Y 2018 An approach to cleaner production for machining hardened steel using different cooling-lubrication conditions J. Clean. Prod.187 1069–81

[334] Nasir V and Cool J 2020 Characterization, optimization, and acoustic emission monitoring of airborne dust emission during wood sawing Int. J. Adv. Manuf. Technol.109 2365–75

[335] Licow R, Chuchala D, Deja M, Orlowski K A and Taube P 2020 Effect of pine impregnation and feed speed on sound level and cutting power in wood sawing J. Clean. Prod.272 122833

[336] Chen K H, Zhang X and Zhao W H 2023 Automatic feature extraction for online chatter monitoring under variable milling conditions Measurement210 112558

[337] Guo Q S, Mao X Y, Peng Y L, Li B, Yan R, Yin L and Liao J W 2023 Online analysis method to correlate the mode shape for forced vibration in milling thin-walled workpieces Int. J. Adv. Manuf. Technol.124 329–47

[338] Huang P L, Zhou J and Xu L 2023 Online measurement of the elastic recovery value of machined surface in milling titanium alloy Int. J. Adv. Manuf. Technol.124 4297–305

[339] Sun H, Zhao S Q, Peng F Y, Yan R, Zhou L, Zhang T and Zhang C 2024 In-situ prediction of machining errors of thin-walled parts: an engineering knowledge based sparse Bayesian learning approach J. Intell. Manuf.35 387–411

[340] Chen D, Zhang X J, Zhao H and Ding H 2021 Development of a novel online chatter monitoring system for flexible milling process Mech. Syst. Signal Process.159 107799

[341] Chang W Y, Chen C C and Wu S J 2019 Chatter analysis and stability prediction of milling tool based on zero-order and envelope methods for real-time monitoring and compensation Int. J. Precis. Eng. Manuf.20 693–700

[342] Mou W P, Zhu S W, Jiang Z X and Song G 2022 Vibration signal-based chatter identification for milling of thin-walled structure Chin. J. Aeronaut.35 204–14

[343] Wang B and Liu Z Q 2018 Influences of tool structure, tool material and tool wear on machined surface integrity during turning and milling of titanium and nickel alloys: a review Int. J. Adv. Manuf. Technol.98 1925–75

[344] Zhang Z F, Qin R, Li G, Du Z Y, Wen G R and He W F 2023 A novel approach for surface integrity monitoring in high-energy nanosecond-pulse laser shock peening: acoustic emission and hybrid-attention CNN IEEE Trans. Ind. Inform.19 2802–13

[345] Yeganefar A, Niknam S A and Asadi R 2019 The use of support vector machine, neural network, and regression analysis to predict and optimize surface roughness and cutting forces in milling Int. J. Adv. Manuf. Technol.105 951–65

[346] Damianakis M A, Bement M T and Liang S Y 2013 Kinematics prediction and experimental validation of machined surface roughness Int. J. Adv. Manuf. Technol.65 1651–7

[347] Banerjee A, Bordatchev E V and Choudhury S K 2009 On-line monitoring of surface roughness in turning operations with opto-electrical transducer Int. J. Manuf. Res.4 57–73

[348] Ribeiro Filho S L M, de Oliveira J A, Lauro C H and Brando L C 2019 Monitoring of microturning process using acoustic emission signals J. Braz. Soc. Mech. Sci. Eng.41 271

[349] Panda A, Sahoo A K, Panigrahi I and Rout A K 2020 Prediction models for on-line cutting tool and machined surface condition monitoring during hard turning considering vibration signal Mech. Ind.21 520

[350] Dou J M, Jiao S J, Xu C W, Luo F S, Tang L H and Xu X X 2020 Unsupervised online prediction of tool wear values using force model coefficients in milling Int. J. Adv. Manuf. Technol.109 1153–66

[351] Gao Q, Guo G Y and Cai M 2021 Wear mechanism and experimental study of a tool used for micro-milling single-crystal nickel-based superalloys Int. J. Adv. Manuf. Technol.113 117–29

[352] Li W T, Wang L P, Yu G and Wang D 2021 Time-varying dynamics updating method for chatter prediction in thin-walled part milling process Mech. Syst. Signal Process.159 107840

[353] Du R X, Elbestawi M A and Ullagaddi B C 1992 Chatter detection in milling based on the probability distribution of cutting force signal Mech. Syst. Signal Process.6 345–62

[354] Altintas Y and Park S S 2004 Dynamic compensation of spindle-integrated force sensors CIRP Ann.53 305–8

[355] Tansel I N, Demetgul M, Bickraj K, Kaya B and Ozcelik B 2013 Basic computational tools and mechanical hardware for torque-based diagnostic of machining operations J. Intell. Manuf.24 147–61

[356] Denkena B, Dahlmann D and Boujnah H 2016 Sensory workpieces for process monitoring-an approach Proc. Technol.26 129–35

[357] Denkena B, Mhring H C and Litwinski K M 2008 Design of dynamic multi sensor systems Prod. Eng.2 327–31

[358] Denkena B and Gmmer O 2012 Process stabilization with an adaptronic spindle system Prod. Eng.6 485–92

[359] Kim S and Klamecki B E 1997 Milling cutter wear monitoring using spindle shaft vibration J. Manuf. Sci. Eng.119 118–9

[360] Liu H B, Bo Q L, Zhang H and Wang Y Q 2018 Analysis of Q-factor's identification ability for thin-walled part flank and mirror milling chatter Int. J. Adv. Manuf. Technol.99 1673–86

[361] Li K, He S P, Luo B, Li B, Liu H Q and Mao X Y 2019 Online chatter detection in milling process based on VMD and multiscale entropy Int. J. Adv. Manuf. Technol.105 5009–22

[362] Li K, He S P, Li B, Liu H Q, Mao X Y and Shi C M 2020 A novel online chatter detection method in milling process based on multiscale entropy and gradient tree boosting Mech. Syst. Signal Process.135 106385

[363] Duro J A, Padget J A, Bowen C R, Kim H A and Nassehi A 2016 Multi-sensor data fusion framework for CNC machining monitoring Mech. Syst. Signal Process.66–67 505–20

[364] Srinivasan A, Dornfeld D and Bhinge R 2016 Integrated vibration and acoustic data fusion for chatter and tool condition classification in milling Proc. 2016 Int. Symp. on Flexible Automation (ISFA) pp 263–6

[365] Ding S L, Izamshah R A R, Mo J and Zhu Y W 2010 Chatter detection in high speed machining of titanium alloys Key Eng. Mater.458 289–94

[366] Kuljanic E, Sortino M and Totis G 2008 Multisensor approaches for chatter detection in milling J. Sound Vib.312 672–93

[367] Kuljanic E, Totis G and Sortino M 2009 Development of an intelligent multisensor chatter detection system in milling Mech. Syst. Signal Process.23 1704–18

[368] Lamraoui M, Barakat M, Thomas M and El Badaoui M 2015 Chatter detection in milling machines by neural network classification and feature selection J. Vib. Control.21 1251–66

[369] Ye J, Feng P F, Xu C, Ma Y and Huang S G 2018 A novel approach for chatter online monitoring using coefficient of variation in machining process Int. J. Adv. Manuf. Technol.96 287–97

[370] Wan S K, Li X H, Chen W and Hong J 2018 Investigation on milling chatter identification at early stage with variance ratio and Hilbert-Huang transform Int. J. Adv. Manuf. Technol.95 3563–73

[371] Li H, Bao T F, Gu C S and Chen B 2019 Vibration feature extraction based on the improved variational mode decomposition and singular spectrum analysis combination algorithm Adv. Struct. Eng.22 1519–30

[372] Segreto T and Teti R 2019 Machine learning for in-process end-point detection in robot-assisted polishing using multiple sensor monitoring Int. J. Adv. Manuf. Technol.103 4173–87

[373] Gonzalo O, Seara J M, Guruceta E, Izpizua A, Esparta M, Zamakona I, Uterga N, Aranburu A and Thoelen J 2017 A method to minimize the workpiece deformation using a concept of intelligent fixture Robot. Comput. Integr. Manuf.48 209–18

[374] Wang Y Q, Bo Q L, Liu H B, Hu L and Zhang H 2018 Mirror milling chatter identification using Q-factor and SVM Int. J. Adv. Manuf. Technol.98 1163–77

[375] Rafal R, Pawel L, Krzysztof K, Bogdan K and Jerzy W 2015 Chatter identification methods on the basis of time series measured during titanium superalloy milling Int. J. Mech. Sci.99 196–207

[376] Hsieh W H, Lu M C and Chiou S J 2012 Application of backpropagation neural network for spindle vibration-based tool wear monitoring in micro-milling Int. J. Adv. Manuf. Technol.61 53–61

[377] Insperger T, Stpn G, Bayly P V and Mann B P 2003 Multiple chatter frequencies in milling processes J. Sound Vib.262 333–45

[378] Jo H N, Park B E, Ji Y M, Kim D K, Yang J E and Lee I B 2020 Chatter detection and diagnosis in hot strip mill process with a frequency-based chatter index and modified independent component analysis IEEE Trans. Ind. Inform.16 7812–20

[379] Jeong K, Seong Y, Jeon J, Moon S and Park J 2022 Chatter monitoring of machining center using head stock structural vibration analyzed with a 1D convolutional neural network Sensors22 5432

[380] Long J B, Wang H B, Li P and Fan H S 2017 Applications of fractional lower order time-frequency representation to machine bearing fault diagnosis IEEE/CAA J. Autom. Sin.4 734–50

[381] Zhu K P, Wong Y S and Hong G S 2009 Wavelet analysis of sensor signals for tool condition monitoring: a review and some new results Int. J. Mach. Tools Manuf.49 537–53

[382] Goharrizi A Y and Sepehri N 2012 Internal leakage detection in hydraulic actuators using empirical mode decomposition and hilbert spectrum IEEE Trans. Instrum. Meas.61 368–78

[383] Zhou C A, Yang B, Guo K, Liu J W, Sun J, Song G, Zhu S W, Sun C and Jiang Z X 2020 Vibration singularity analysis for milling tool condition monitoring Int. J. Mech. Sci.166 105254

[384] Choi T and Shin Y C 2003 On-line chatter detection using wavelet-based parameter estimation J. Manuf. Sci. Eng.125 21–28

[385] Yao Z H, Mei D Q and Chen Z C 2010 On-line chatter detection and identification based on wavelet and support vector machine J. Mater. Process. Technol.210 713–9

[386] Liu H Q, Chen Q H, Li B, Mao X Y, Mao K M and Peng F Y 2011 On-line chatter detection using servo motor current signal in turning Sci. China Technol. Sci.54 3119–29

[387] Fu Y, Zhang Y, Zhou H M, Li D Q, Liu H Q, Qiao H Y and Wang X Q 2016 Timely online chatter detection in end milling process Mech. Syst. Signal Process.75 668–88

[388] Sun S X, Liu Y C, Hu X F and Zhang W J 2023 A semisupervised autoencoder-based method for anomaly detection in cutting tools J. Manuf. Process.93 315–27

[389] Zhang X Y, Liu L L, Wan X and Feng B W 2021 Tool wear online monitoring method based on DT and SSAE-PHMM J. Comput. Inf. Sci. Eng.21 034501

[390] Caggiano A, Mattera G and Nele L 2023 Smart tool wear monitoring of CFRP/CFRP stack drilling using autoencoders and memory-based neural networks Appl. Sci.13 3307

[391] Proteau A, Zemouri R, Tahan A and Thomas M 2020 Dimension reduction and 2D-visualization for early change of state detection in a machining process with a variational autoencoder approach Int. J. Adv. Manuf. Technol.111 3597–611

[392] Fu Y, Zhang Y, Gao H, Mao T, Zhou H M, Sun R L and Li D Q 2019 Automatic feature constructing from vibration signals for machining state monitoring J. Intell. Manuf.30 995–1008

[393] Chen Y X, Jin Y and Jiri G 2018 Predicting tool wear with multi-sensor data using deep belief networks Int. J. Adv. Manuf. Technol.99 1917–26

[394] Yang J, Zhang L Q, Liu G, Gao Q G and Qian L 2022 Sintered silicon carbide grinding surface roughness prediction based on deep learning and neural network J. Braz. Soc. Mech. Sci. Eng.44 287

[395] Kuo P H, Luan P C, Tseng Y R and Yau H T 2023 Machine tool chattering monitoring by Chen-Lee chaotic system-based deep convolutional generative adversarial nets Struct. Health Monit.22 3891–907

[396] Wu X F, Liu Y H, Zhou X L and Mou A L 2019 Automatic identification of tool wear based on convolutional neural network in face milling process Sensors19 3817

[397] Zhao J W, Guo S J, Ma L, Kong H Q and Zhang N 2023 Tool wear monitoring based on an improved convolutional neural network J. Mech. Sci. Technol.37 1949–58

[398] Vashisht R K and Peng Q J 2021 Online chatter detection for milling operations using LSTM neural networks assisted by motor current signals of ball screw drives J. Manuf. Sci. Eng.143 011008

[399] Pourmostaghimi V, Zadshakoyan M, Khalilpourazary S and Badamchizadeh M A 2022 A hybrid particle swarm optimization and recurrent dynamic neural network for multi-performance optimization of hard turning operation Artif. Intell. Eng. Des. Anal. Manuf.36 e28

[400] De Barrena T F, Ferrando J L, Garca A, Badiola X, de Buruaga M S and Vicente J 2023 Tool remaining useful life prediction using bidirectional recurrent neural networks (BRNN) Int. J. Adv. Manuf. Technol.125 4027–45

[401] Wan L J, Chen K Y, Li Y Y, Wu Y Z, Wang Z B and Li C Y 2022 A novel remaining useful life prediction method based on CEEMDAN-IFTC-PSR and ensemble CNN/BiLSTM model for cutting tool IEEE Access10 2182–95

[402] Marei M and Li W D 2022 Cutting tool prognostics enabled by hybrid CNN-LSTM with transfer learning Int. J. Adv. Manuf. Technol.118 817–36

[403] Wong S Y, Chuah J H, Yap H J and Tan C F 2023 Dissociation artificial neural network for tool wear estimation in CNC milling Int. J. Adv. Manuf. Technol.125 887–901

[404] Gao C, Xue W, Ren Y and Zhou Y Q 2017 Numerical control machine tool fault diagnosis using hybrid stationary subspace analysis and least squares support vector machine with a single sensor Appl. Sci.7 346

[405] Sun H B, Zhang X Z and Wang J Y 2016 Online machining chatter forecast based on improved local mean decomposition Int. J. Adv. Manuf. Technol.84 1045–56

[406] Zhu K P and Liu T S 2018 Online tool wear monitoring via hidden semi-Markov model with dependent durations IEEE Trans. Ind. Inform.14 69–78

[407] Terrazas G, Martnez-Arellano G, Benardos P and Ratchev S 2018 Online tool wear classification during dry machining using real time cutting force measurements and a CNN approach J. Manuf. Mater. Process.2 72

[408] Ou J Y, Li H K, Huang G J and Yang G W 2021 Intelligent analysis of tool wear state using stacked denoising autoencoder with online sequential-extreme learning machine Measurement167 108153

[409] Xiao Q G, Yang Z L, Zhang Y F and Zheng P 2023 Adaptive optimal process control with actor-critic design for energy-efficient batch machining subject to time-varying tool wear J. Manuf. Syst.67 80–96

[410] Bagaber S A and Yusoff A R 2017 Multi-objective optimization of cutting parameters to minimize power consumption in dry turning of stainless steel 316 J. Clean. Prod.157 30–46

[411] Hanafi I, Khamlichi A, Cabrera F M, Almansa E and Jabbouri A 2012 Optimization of cutting conditions for sustainable machining of PEEK-CF30 using TiN tools J. Clean. Prod.33 1–9

[412] Zhang L, Zhao X K, Ke Q D, Dong W F and Zhong Y J 2021 Disassembly line balancing optimization method for high efficiency and low carbon emission Int. J. Precis. Eng. Manuf.-Green Technol.8 233–47

[413] Wu Z H, Jiang H K, Zhao K and Li X Q 2020 An adaptive deep transfer learning method for bearing fault diagnosis Measurement151 107227

[414] Li C B, Chen X Z, Tang Y and Li L 2017 Selection of optimum parameters in multi-pass face milling for maximum energy efficiency and minimum production cost J. Clean. Prod.140 1805–18

[415] Tian C L, Zhou G H, Zhang J J and Zhang C 2019 Optimization of cutting parameters considering tool wear conditions in low-carbon manufacturing environment J. Clean. Prod.226 706–19

[416] Duc D H, Van Thom D, Cong P H, Van Minh P and Nguyen N X 2023 Vibration and static buckling behavior of variable thickness flexoelectric nanoplates Mech. Based Des. Struct. Mach.51 7102–30

[417] Salem A, Hegab H, Rahnamayan S and Kishawy H A 2022 Multi-objective optimization and innovization-based knowledge discovery of sustainable machining process J. Manuf. Syst.64 636–47

[418] Zhang X S, Liao S Y, Cao F L, Zhao L G, Pei J J and Tang F 2018 Cloning and characterization of enoate reductase with high -ionone to dihydro--ionone bioconversion productivity BMCBiotechnoogy18 26

[419] Liu C Q, Li Y G, Huang C, Zhao Y J and Zhao Z W 2023 A meta-reinforcement learning method by incorporating simulation and real data for machining deformation control of finishing process Int. J. Prod. Res.61 1114–28

[420] Lu F Y, Zhou G H, Zhang C, Liu Y, Chang F T and Xiao Z D 2023 Energy-efficient multi-pass cutting parameters optimisation for aviation parts in flank milling with deep reinforcement learning Robot. Comput. Integr. Manuf.81 102488

[421] Li C B, Zhao X K, Cao H J, Li L and Chen X Z 2023 A data and knowledge-driven cutting parameter adaptive optimization method considering dynamic tool wear Robot. Comput. Integr. Manuf.81 102491

[422] Liu S M, Lu Y Q, Shen X W and Bao J S 2023 A digital thread-driven distributed collaboration mechanism between digital twin manufacturing units J. Manuf. Syst.68 145–59

[423] Bi Q Z, Huang N D, Zhang S K, Shuai C L and Wang Y H 2019 Adaptive machining for curved contour on deformed large skin based on on-machine measurement and isometric mapping Int. J. Mach. Tools Manuf.136 34–44

[424] Chen W H, Liu Y J, Qu D F, Zheng M, Lang Q F, Zhu S Y and Zhu Z X 2023 Effect of pores on microscopic wear properties and deformation behavior of Ni-Cr alloy coating J. Mol. Model.29 330

[425] Wei W M, Robles-Linares J A, Liao Z R, Wang Z, Luna G G, Billingham J and Axinte D 2022 On modelling coolant penetration into the microchannels at the tool-workpiece interface J. Manuf. Process.84 43–54

[426] Jin G, Li W S, Han J X, Li Z J, Hu G F and Sun G X 2021 An updated method for stability analysis of milling process with multiple and distributed time delays and its application Appl. Sci.11 4203

[427] Macas A, Muoz D, Navarro E and Gonzlez P 2024 Data fabric and digital twins: an integrated approach for data fusion design and evaluation of pervasive systems Inf. Fusion103 102139

[428] Li E M, Zhou J T, Yang C S, Zhao J H, Li Z Y, Zhang S S and Wang M W 2023 Part machining deformation prediction based on spatial-temporal correlation learning of geometry and cutting loads J. Manuf. Process.92 397–411

微信扫一扫：分享

微信扫一扫：分享