[1] Khdair A I and Ibrahim A 2022 Effect of graphene addition on the physicomechanical and tribological properties of Cu nanocomposites Int. J. Miner. Metall. Mater. 29 161–7

[2] Abd-Elwahed M S, Wagih A and Najjar I M R 2020 Correlation between micro/nano-structure, mechanical and tribological properties of copper-zirconia nanocomposites Ceram. Int. 46 56–65

[3] Pratik A, Biswal S K and Haridoss P 2020 Impact of enhanced interfacial strength on physical, mechanical and tribological properties of copper/reduced graphene oxide composites: microstructural investigation Ceram. Int. 46 22539–49

[4] QinYQ,TianY, PengYQ,LuoLM,ZanX,XuQ and Wu Y C 2020 Research status and development trend of preparation technology of ceramic particle dispersion strengthened copper-matrix composites J. Alloys Compd. 848 156475

[5] Zhou G H and Ding H Y 2013 Wear performance of alumina-reinforced copper-matrix composites prepared by powder metallurgy Proc. Inst. Mech. Eng. J. 227 1011–7

[6] Zhan Y Z and Zhang G D 2022 Elevated temperature friction and wear behavior of SiC-reinforced copper matrix composites Int. J. Mater. Res. 95 1040–5

[7] Pan JM,YinJW, XiaYF, Yao DX,LiangHQ,ZuoKH and Zeng Y P 2019 The microstructure and properties of bronze matrix composites with surface-modified graphite by titanium carbide adhesion Tribol. Int. 140 105892

[8] Shaik M A and Golla B R 2020 Mechanical, tribological and electrical properties of ZrB2 reinforced Cu processed via milling and high-pressure hot pressing Ceram. Int. 46 20226–35

[9] Moustafa E B and Taha M A 2021 Evaluation of the microstructure, thermal and mechanical properties of Cu/SiC nanocomposites fabricated by mechanical alloying Int. J. Miner. Metall. Mater. 28 475–86

[10] ZhangPC,JieJC,GaoY, LiH,CaoZQ,WangTMand Li T J 2015 Preparation and properties of TiB2 particles reinforced Cu-Cr matrix composite Mater. Sci. Eng. A 642 398–405

[11] FengJ,SongKX,LiangSH,GuoXHandLiSL2022 Mechanical properties and electrical conductivity of oriented-SiC-whisker-reinforced Al2O3/Cu composites J. Mater. Res. Technol. 20 1470–80

[12] ZhaoJ,WangXW, ShuFY, JiangSS,MaP, ZhaoYXand Yu Z S 2020 Research on microstructure of copper coatings on AlN ceramic surface by laser cladding and brazing Mater. Res. Express 7 075104

[13] Li F P, Wang W X, Dang W, Zhao K and Tang Y F 2020 Wetting mechanism and bending property of Cu/Al2O3 laminated composites with pretreated CuO interlayer Ceram. Int. 46 17392–9

[14] Jarza.bek D M, Dzieko′nski C, Dera W, Chrzanowska J and Wojciechowski T 2018 Influence of Cu coating of SiC particles on mechanical properties of Ni/SiC co-electrodeposited composites Ceram. Int. 44 21750–8

[15] Nalepka K, Sztwiertnia K and Nalepka P 2016 Preferred orientation relationships at the Cu/α-Al2O3 interface: identification and theoretical explanation Acta Mater. 104 156–65

[16] MuZ,GengHR,LiMM,NieGLandLengJF2013 Effects of Y2O3 on the property of copper based contact materials Composites B 52 51–55

[17] HanTL,HouC,ZhaoZ,HuangXT, TangFW, LiYRand Song X Y 2022 W–Cu composites with excellent comprehensive properties Composites B 233 109664

[18] Luo X, Yang Y Q, Mei Y W, Huang B, Yuan M N and Chen Y 2007 Titanium interlayers as adhesion promoters for SiCf/Cu composites Scr. Mater. 56 569–72

[19] S.ap S, Turgut A and Uzun M 2021 Investigation of microstructure and mechanical properties of Cu/Ti–B–SiCp hybrid composites Ceram. Int. 47 29919–29

[20] Güler O, Varol T, Alver ¨U and Canakci A 2020 Effect of Al2O3 content and milling time on the properties of silver coated Cu matrix composites fabricated by electroless plating and hot pressing Mater. Today Commun. 24 101153

[21] Zhang C C, Zhang J, Luo G Q, Liu Y, Shen Q and Zhang L M 2018 Preparation and properties of W-SiC/Cu composites by tape casting and hot-pressing sintering Mater. Sci. Technol. 34 1353–61

[22] Avettand-Fèno¨el M-N, Simar A, Shabadi R, Taillard R and de Meester B 2014 Characterization of oxide dispersion strengthened copper based materials developed by friction stir processing Mater. Des. 60 343–57

[23] Barmouz M, Asadi P, Besharati Givi M K and Taherishargh M 2011 Investigation of mechanical properties of Cu/SiC composite fabricated by FSP: effect of SiC particles’ size and volume fraction Mater. Sci. Eng. A 528 1740–9

[24] Khosroshahi R A, Nemati N, Emamy M, Parvini N and Zolriasatein A 2012 Investigation of wear properties of Al-4.5wt.%Cu nano-composite reinforced with different weight percent of TiC nano particles produced by mechanical alloying Adv. Mater. Res. 545 124–8

[25] Zhang J, He L F and Zhou Y C 2009 Highly conductive and strengthened copper matrix composite reinforced by Zr2Al3C4 particulates Scr. Mater. 60 976–9

[26] Prosviryakov A S 2015 SiC content effect on the properties of Cu-SiC composites produced by mechanical alloying J. Alloys Compd. 632 707–10

[27] LianWQ,MaiY, WangJ,ZhangLY, LiuCSandJieXH 2019 Fabrication of graphene oxide-Ti3AlC2 synergistically reinforced copper matrix composites with enhanced tribological performance Ceram. Int. 45 18592–8

[28] Wang X L, Wang Y P, Su Y and Qu Z G 2019 Synergetic strengthening effects on copper matrix induced by Al2O3 particle revealed from micro-scale mechanical deformation and microstructure evolutions Ceram. Int. 45 14889–95

[29] Saheb N, Iqbal Z, Khalil A, Hakeem A S, Al Aqeeli N, Laoui T, Al-Qutub A and Kirchner R 2012 Spark plasma sintering of metals and metal matrix nanocomposites: a review J. Nanomater. 2012 983470

[30] LiCG,XieYH,ZhouDS,ZengW, WangJ,LiangJMand Zhang D L 2019 A novel way for fabricating ultrafine grained Cu-4.5 vol% Al2O3 composite with high strength and electrical conductivity Mater. Charact. 155 109775

[31] Hosseini Vajargah P, Abdizadeh H and Baghchesara M A 2015 Fabrication of TiB2 nanoparticulates-reinforced aluminum matrix composites by powder metallurgy route J. Compos. Mater. 49 3115–25

[32] Baghani M and Aliofkhazraei M 2017 CuCrW(Al2O3) nanocomposite: mechanical alloying, microstructure, and tribological properties Int. J. Miner. Metall. Mater. 24 1321–34

[33] Aghamiri S M S, Oono N, Ukai S, Kasada R, Noto H, Hishinuma Y and Muroga T 2018 Microstructure and mechanical properties of mechanically alloyed ODS copper alloy for fusion material application Nucl. Mater. Energy 15 17–22

[34] Bera S and Manna I 2012 Synthesis of CuCr and CuCrAg alloy with nano-ceramic dispersion by mechanical alloying and consolidation by laser assisted sintering Mater. Chem. Phys. 132 109–18

[35] NiJJ,LiJ,LuoW, HanQ,YinYB,JiaZF, HuangBX, Hu C C and Xu Z L 2018 Microstructure and properties of in-situ TiC reinforced copper nanocomposites fabricated via long-term ball milling and hot pressing J. Alloys Compd. 755 24–28

[36] Khamaj A, Farouk W M, Shewakh W M, Abu-Oqail A M I, Wagih A and Abu-Okail M 2021 Effect of lattice structure evolution on the thermal and mechanical properties of Cu–Al2O3/GNPs nanocomposites Ceram. Int. 47 16511–20

[37] Zawrah M F, Abdel-Kader H and Elbaly N E 2012 Fabrication of Al2O3-20vol.% Al nanocomposite powders using high energy milling and their sinterability Mater. Res. Bull. 47 655–61

[38] Fogagnolo J B, Velasco F, Robert M H and Torralba J M 2003 Effect of mechanical alloying on the morphology, microstructure and properties of aluminium matrix composite powders Mater. Sci. Eng. A 342 131–43

[39] Zawrah M F, Zayed H A, Essawy R A, Nassar A H and Taha M A 2013 Preparation by mechanical alloying, characterization and sintering of Cu-20wt.% Al2O3 nanocomposites Mater. Des. 46 485–90

[40] Taha M A and Zawrah M F 2017 Effect of nano ZrO2 on strengthening and electrical properties of Cu-matrix nanocomposits prepared by mechanical alloying Ceram. Int. 43 12698–704

[41] Akbarpour M R, Salahi E, Alikhani Hesari F, Simchi A and Kim H S 2014 Microstructure and compressibility of SiC nanoparticles reinforced Cu nanocomposite powders processed by high energy mechanical milling Ceram. Int. 40 951–60

[42] Zebarjad S M and Sajjadi S A 2007 Dependency of physical and mechanical properties of mechanical alloyed Al–Al2O3 composite on milling time Mater. Des. 28 2113–20

[43] Wang F L, Li Y P, Yamanaka K, Wakon K, Harata K and Chiba A 2014 Influence of two-step ball-milling condition on electrical and mechanical properties of TiC-dispersion-strengthened Cu alloys Mater. Des. 64 441–9

[44] Huang F, Wang H, Yang B, Liao T and Wang Z Y 2019 Uniformly dispersed Y2O3 nanoparticles in nanocrystalline copper matrix via multi-step ball milling and reduction process Mater. Lett. 242 119–22

[45] Shao Z Y, Sun Y, Liu W X, Zhang X Q and Jiang X S 2016 Effects of multi-phase reinforcements on microstructures, mechanical and tribological properties of Cu/Ti3SiC2/ C/BN/GNPs nanocomposites sintered by vacuum hot-pressing and hot isostatic pressing Metals 6 324

[46] JiangXS,LiuWX,LiYJ,ShaoZY, LuoZP, ZhuDGand Zhu M H 2018 Microstructures and mechanical properties of Cu/Ti3SiC2/C/graphene nanocomposites prepared by vacuum hot-pressing sintering and hot isostatic pressing Composites B 141 203–13

[47] Kelly J P and Graeve O A 2015 Spark plasma sintering as an approach to manufacture bulk materials: feasibility and cost savings JOM 67 29–33

[48] Oliver U C, Sunday A V, Christain E I E I and Elizabeth M M 2021 Spark plasma sintering of aluminium composites—a review Int. J. Adv. Manuf. Technol. 112 1819–39

[49] Munir Z A and Ohyanagi M 2021 Perspectives on the spark plasma sintering process J. Mater. Sci. 56 1–15

[50] Nisar A, Zhang C, Boesl B and Agarwal A 2021 Unconventional materials processing using spark plasma sintering Ceramics 4 20–39

[51] ZhangZH,LiuZF, LuJF, ShenXB,WangFCand Wang Y D 2014 The sintering mechanism in spark plasma sintering—proof of the occurrence of spark discharge Scr. Mater. 81 56–59

[52] Naghikhani M, Ardestani M and Moazami-Goudarzi M 2021 Microstructure, mechanical properties and wear performance of WC/brass composites produced by pressureless and spark plasma sintering processes Met. Mater. Int. 27 1639–48

[53] Qin Y Q, Zhuang Y, Wang Y, Zhang Y F, Luo L M, Zan X and Wu Y C 2022 Enhanced mechanical and electrical properties of CuCrZr-WC alloy prepared by mechanical alloying and spark plasma sintering Fusion Eng. Des. 180 113166

[54] Sovizi S and Seraji M E 2019 The densification behavior of metals and alloys during spark plasma sintering: a mini-review Sci. Sinter. 51 135–52

[55] Saheb N, Hayat U and Hassan S F 2019 Recent advances and future prospects in spark plasma sintered alumina hybrid nanocomposites Nanomaterials 9 1607

[56] Venkatesh V S S and Deoghare A B 2022 Effect of sintering mechanisms on the mechanical behaviour of SiC and kaoline reinforced hybrid aluminium metal matrix composite fabricated through powder metallurgy technique Silicon 14 5481–93

[57] Dash K, Ray B C and Chaira D 2012 Synthesis and characterization of copper-alumina metal matrix composite by conventional and spark plasma sintering J. Alloys Compd. 516 78–84

[58] Senthilnathan N, Annamalai A R and Venkatachalam G 2018 Microstructure and mechanical properties of spark plasma sintered tungsten heavy alloys Mater. Sci. Eng. A 710 66–73

[59] Akbarpour M R, Mousa Mirabad H, Khalili Azar M, Kakaei K and Kim H S 2020 Synergistic role of carbon nanotube and SiCn reinforcements on mechanical properties and corrosion behavior of Cu-based nanocomposite developed by flake powder metallurgy and spark plasma sintering process Mater. Sci. Eng. A 786 139395

[60] Zhou D S, Wang X K, Muránsky O, Wang X R, Xie Y H, Yang C and Zhang D L 2018 Heterogeneous microstructure of an Al2O3 dispersion strengthened Cu by spark plasma sintering and extrusion and its effect on tensile properties and electrical conductivity Mater. Sci. Eng. A 730 328–35

[61] Shi X L, Yang H and Wang S 2009 Spark plasma sintering of W-15Cu alloy from ultrafine composite powder prepared by spray drying and calcining-continuous reduction technology Mater. Charact. 60 133–7

[62] Seyyedi A and Abdoos H 2022 An examination of microstructure and dry wear properties of nano-Y2O3 incorporated in fine-grained W-Ni-Cu alloy prepared by conventional and spark plasma sintering Int. J. Refract. Met. Hard Mater. 102 105728

[63] Bahador A, Umeda J, Hamzah E, Yusof F, Li X C and Kondoh K 2020 Synergistic strengthening mechanisms of copper matrix composites with TiO2 nanoparticles Mater. Sci. Eng. A 772 138797

[64] Li K W and Gao F 2018 Heterogeneity of grain refinement and texture formation during pulsed electric current sintering of conductive powder: a case study in copper powder Adv. Powder Technol. 29 3385–93

[65] Pan Y, XiaoSQ,LuX,ZhouC,LiY, LiuZW, LiuBW, Xu W, Jia C C and Qu X H 2019 Fabrication, mechanical properties and electrical conductivity of Al2O3 reinforced Cu/CNTs composites J. Alloys Compd. 782 1015–23

[66] Chmielewski M, Pietrzak K, Strojny-Ne.dza A, Jarzabek D and Nosewicz S 2017 Investigations of interface properties in copper-silicon carbide composites Arch. Metall. Mater. 62 1315–8

[67] Wang Q C, Chen M H, Shan Z M, Sui C, Zhang L, Zhu S L and Wang F H 2017 Comparative study of mechanical and wear behavior of Cu/WS2 composites fabricated by spark plasma sintering and hot pressing J. Mater. Sci. Technol. 33 1416–23

[68] Zhou X Y, Hu Z and Yi D Q 2019 Enhancing the oxidation resistance and electrical conductivity of alumina reinforced copper-based composites via introducing Ag and annealing treatment J. Alloys Compd. 787 786–93

[69] LiuXY et al 2022 Effect of chromium interlayer thickness on interfacial thermal conductance across copper/diamond interface Int. J. Miner. Metall. Mater. 29 2020–31

[70] Dong Y, Wang X K, Xie Y H, Yang C and Zhou D S 2020 Tunable microstructures and tensile mechanical properties of oxide-dispersion-strengthened Cu by extrusion and secondary processing J. Alloys Compd. 812 152112

[71] Zheng R G and Li N N 2019 Mechanical properties and electrical conductivity of nano-La2O3 reinforced copper matrix composites fabricated by spark plasma sintering Mater. Res. Express 6 106527

[72] Rajkovic V, Bozic D and Jovanovic M T 2010 Effects of copper and Al2O3 particles on characteristics of Cu-Al2O3 composites Mater. Des. 31 1962–70

[73] ZhangXH,LiXX,ChenH,LiTB,SuWandGuoSD 2016 Investigation on microstructure and properties of Cu-Al2O3 composites fabricated by a novel in-situ reactive synthesis Mater. Des. 92 58–63

[74] Yan ZQ,ChenF, Ye FX,ZhangDPandCaiYX2016 Microstructures and properties of Al2O3 dispersion-strengthened copper alloys prepared through different methods Int. J. Miner. Metall. Mater. 23 1437–43

[75] Xiang Z Q, Li Z, Lei Q, Xiao Z and Pang Y 2015 High temperature mechanical behavior of alumina dispersion strengthened copper alloy with high content of alumina Trans. Nonferrous Met. Soc. China 25 444–50

[76] ZhaoZQ,XiaoZ,LiZ,ZhuMNandYangZQ2017 Characterization of dispersion strengthened copper alloy prepared by internal oxidation combined with mechanical alloying J. Mater. Eng. Perform. 26 5641–7

[77] Zhao S X, Zhang T X and Wang M J 2022 Factors affecting the coarsening and agglomeration of alumina particles in Cu–Al2O3 composites prepared with internal oxidation Adv. Eng. Mater. 24 2101169

[78] HanSZ,JohH,AhnJH,LeeJ,KimSM,LimSHand Son Y G 2015 Ti-added alumina dispersion-strengthened Cu alloy fabricated by oxidation J. Alloys Compd. 622 384–7

[79] Zhou X Y, Yi D Q, Nyborg L, Hu Z, Huang J and Cao Y 2017 Influence of Ag addition on the microstructure and properties of copper-alumina composites prepared by internal oxidation J. Alloys Compd. 722 962–9

[80] LongF,GuoXH,SongKX,LiuJQ,WangX,YangYBand Li S L 2022 An internal-oxidation-based strategy induced high-density alumina in-situ nanoprecipitation and carbon nanotube interface optimization for co-reinforcing copper matrix composites Composites B 229 109455

[81] XuK,ChenXH,ZhouHL,BiLM,FuSL,LiW, LiuXK, Ma F C, Zhang K and Liu P 2019 Preparation and formation mechanism of CNTs/Cu-Al2O3 composite powders by in situ CVD using internally-oxidized Cu-Al alloy powders Mater. Lett. 254 390–3

[82] GuoX,ChenXH,LiuP, ZhouHL,FuSL,LiW, LiuXK, Ma F C and Wu Z P 2021 Preparation and mechanical properties of copper matrix composites reinforced by carbon nanotubes and Al2O3 Adv. Eng. Mater. 23 2001490

[83] Jiang Y H, Wang C, Liang S H, Ren J Q, Du X and Liu F 2016 TiB2 (-TiB)/Cu in-situ composites prepared by hot-press with the sintering temperature just beneath the melting point of copper Mater. Charact. 121 76–81

[84] Zhang D D, He X Y, Zhao H and Gao Y L 2022 Properties of TiCp/Cu composites fabricated by powder metallurgy and electrodeless copper plating Mater. Sci. Technol. 38 5–11

[85] Fathy A 2018 Investigation on microstructure and properties of Cu-ZrO2 nanocomposites synthesized by in situ processing Mater. Lett. 213 95–99

[86] Xie K, Han C, Liu J and Tan Y L 2020 Fabrication of Cu-ZrO2 composites by in situ oxidation of liquid Cu–Zr alloy J. Nanoparticle Res. 22 80

[87] DongZ,HuWQ,MaZQ,LiCandLiuYC2019The synthesis of composite powder precursors via chemical processes for the sintering of oxide dispersion-strengthened alloys Mater. Chem. Front. 3 1952–72

[88] ZhangSR,KangHJ,LiRG,ZouCL,GuoEY, ChenZN and Wang T M 2019 Microstructure evolution, electrical conductivity and mechanical properties of dual-scale Cu5Zr/ZrB2 particulate reinforced copper matrix composites Mater. Sci. Eng. A 762 138108

[89] Pan SH,ZhengTQ,Yao GC,ChiYT, DeRosaI and Li X C 2022 High-strength and high-conductivity in situ Cu–TiB2 nanocomposites Mater. Sci. Eng. A 831 141952

[90] Sobhani M, Mirhabibi A, Arabi H and Brydson R M D 2013 Effects of in situ formation of TiB2 particles on age hardening behavior of Cu-1wt% Ti-1wt% TiB2 Mater. Sci. Eng. A 577 16–22

[91] Tjong S C and Ma Z Y 2000 Microstructural and mechanical characteristics of in situ metal matrix composites Mater. Sci. Eng. R 29 49–113

[92] Tun K S and Gupta M 2007 Improving mechanical properties of magnesium using nano-yttria reinforcement and microwave assisted powder metallurgy method Compos. Sci. Technol. 67 2657–64

[93] Garcés G, Rodríguez M, Pérez P and Adeva P 2007 High temperature mechanical properties of Mg-Y2O3 composite: competition between texture and reinforcement contributions Compos. Sci. Technol. 67 632–7

[94] Zhuo H O, Tang J C and Ye N 2013 A novel approach for strengthening Cu-Y2O3 composites by in situ reaction at liquidus temperature Mater. Sci. Eng. A 584 1–6

[95] Yu ZL,ZhuHG,HuangJW, LiJLandXieZH2017 Processing and characterization of in-situ ultrafine TiB2-Cu composites from Ti-B-Cu system Powder Technol. 320 66–72

[96] Ding H M, Liu Q, Wang X L, Fan X L, Krzystyniak M, Glandut N and Li C 2018 Effects of boron addition on the microstructure and properties of in situ synthesis TiC reinforced Cu–Ti–C composites J. Alloys Compd. 766 66–73

[97] GuoSY, ZhangX,ShiCS,LiuEZ,HeCN,HeFand Zhao N Q 2019 Enhanced mechanical properties and electrical conductivity of graphene nanoplatelets/Cu composites by in situ formation of Mo2C nanoparticles Mater. Sci. Eng. A 766 138365

[98] Zhang D D, Bai F, Sun L P, Wang Y and Wang J 2017 Compression properties and electrical conductivity of in-situ 20 vol.% nano-sized TiCx/Cu composites with different particle size and morphology Materials 10 499

[99] Sadeghi N, Aghajani H and Akbarpour M R 2018 Microstructure and tribological properties of in-situ TiC-C/Cu nanocomposites synthesized using different carbon sources (graphite, carbon nanotube and graphene) in the Cu-Ti-C system Ceram. Int. 44 22059–67

[100] YanYF, Kou SQ,YangHY,ShuSLandLuJB2022Effect mechanism of mono-particles or hybrid-particles on the thermophysical characteristics and mechanical properties of Cu matrix composites Ceram. Int. 48 23033–43

[101] Zhou D S, Zhang D L, Kong C and Munroe P 2013 Factors controlling the tensile properties of ultrafine structured Cu-5vol%Al2O3 nanocomposite prepared by high energy mechanical milling and powder compact extrusion Mater. Sci. Eng. A 584 67–72

[102] Han L, Wang J, Chen Y Y, Huang Y, Liu Y C and Wang Z M 2021 Fabrication and mechanical properties of WC nanoparticle dispersion-strengthened copper Mater. Sci. Eng. A 817 141274

[103] Bazarnik P, Nosewicz S, Romelczyk-Baishya B, Chmielewski M, Strojny Ne.dza A, Maj J, Huang Y, Lewandowska M and Langdon T G 2019 Effect of spark plasma sintering and high-pressure torsion on the microstructural and mechanical properties of a Cu–SiC composite Mater. Sci. Eng. A 766 138350

[104] Yan Y X, Zou J M, Zhang X H, Xiao Q, Chen B Q, Huang F, Li X X, Yang B and Liang T X 2021 Investigation on microstructure and properties of TiC0.5-Al2O3/Cu composites fabricated by a novel in-situ reactive synthesis Ceram. Int. 47 18858–65

[105] Wang S, Xie M, Zhang J M and Chen Y T 2014 Synthesis and properties of 0.3%Y2O3/0.3%La2O3/0.3%Al2O3/Cu composite Sci. Eng. Compos. Mater. 21 517–20

[106] TianBH,LiuP, SongKX,LiY, LiuY, RenFZandSuJH 2006 Microstructure and properties at elevated temperature of a nano-Al2O3 particles dispersion-strengthened copper base composite Mater. Sci. Eng. A 435–436 705–10

[107] LuJB,ShuSL,QiuF, WangYWandJiangQC2012 Compression properties and abrasive wear behavior of high volume fraction TiCx-TiB2/Cu composites fabricated by combustion synthesis and hot press consolidation Mater. Des. 40 157–62

[108] LiTJ,WangYQ,YangM,HouHLandWu SJ2021High strength and conductivity copper/graphene composites prepared by severe plastic deformation of graphene coated copper powder Mater. Sci. Eng. A 826 141983

[109] GaoS,NanZL,LiY, ZhaoN,LiuQQ,XuGF, ChengXN and Yang J 2020 Copper matrix thermal conductive composites with low thermal expansion for electronic packaging Ceram. Int. 46 18019–25

[110] Cho S, Kikuchi K and Kawasaki A 2012 On the role of amorphous intergranular and interfacial layers in the thermal conductivity of a multi-walled carbon nanotube-copper matrix composite Acta Mater. 60 726–36

[111] Wang Y P, Fu R D, Li Y J and Zhao L 2019 A high strength and high electrical conductivity Cu-Cr-Zr alloy fabricated by cryogenic friction stir processing and subsequent annealing treatment Mater. Sci. Eng. A 755 166–9

[112] LiYP, XiaoZ,LiZ,ZhouZY, YangZQandLeiQ2017 Microstructure and properties of a novel Cu-Mg-Ca alloy with high strength and high electrical conductivity J. Alloys Compd. 723 1162–70

[113] DongQY,ShenLN,CaoF,JiaYL,LiaoKJandWangMP 2015 Effect of thermomechanical processing on the microstructure and properties of a Cu-Fe-P alloy J. Mater. Eng. Perform. 24 1531–9

[114] WangW, GuoEY, ChenZN,KangHJ,ChenZJ,ZouCL, Li R G, Yin G M and Wang T M 2018 Correlation between microstructures and mechanical properties of cryorolled CuNiSi alloys with Cr and Zr alloying Mater. Charact. 144 532–46

[115] LiRG,GuoEY, ChenZN,KangHJ,WangW, ZouCL, Li T J and Wang T M 2019 Optimization of the balance between high strength and high electrical conductivity in CuCrZr alloys through two-step cryorolling and aging J. Alloys Compd. 771 1044–51

[116] Kulczyk M, Pachla W, Godek J, Smalc-Koziorowska J, Skiba J, Przybysz S, Wróblewska M and Przybysz M 2018 Improved compromise between the electrical conductivity and hardness of the thermo-mechanically treated CuCrZr alloy Mater. Sci. Eng. A 724 45–52

[117] Edwards D J, Singh B N and T.htinen S 2007 Effect of heat treatments on precipitate microstructure and mechanical properties of a CuCrZr alloy J. Nucl. Mater. 367–370 904–9

[118] Vinogradov A, Patlan V, Suzuki Y, Kitagawa K and Kopylov V I 2002 Structure and properties of ultra-fine grain Cu-Cr-Zr alloy produced by equal-channel angular pressing Acta Mater. 50 1639–51

[119] Yan ZY, MaZ,LiuL,ZhuSZandGaoLH2014The ablation behavior of ZrB2/Cu composite irradiated by high-intensity continuous laser J. Eur. Ceram. Soc. 34 2203–9

[120] YinJW, ZhouPL,LiangHQ,Yao DX,XiaYF, ZuoKH and Zeng Y P 2020 Microstructure and mechanical properties of Cu matrix composites reinforced by TiB2/TiN ceramic reinforcements Acta Metall. Sin. 33 1609–17

[121] DongBX,LiQ,WangZF, LiuTS,YangHY, ShuSL, Chen L Y, Qiu F, Jiang Q C and Zhang L C 2021 Enhancing strength-ductility synergy and mechanisms of Al-based composites by size-tunable in-situ TiB2 particles with specific spatial distribution Composites B 217 108912

[122] Fathy A and El-Kady O 2013 Thermal expansion and thermal conductivity characteristics of Cu-Al2O3 nanocomposites Mater. Des. 46 355–9

[123] Xu J Z, Gao B Z and Kang F Y 2016 A reconstruction of Maxwell model for effective thermal conductivity of composite materials Appl. Therm. Eng. 102 972–9

[124] Ghosh G, Miyake J and Fine M E 1997 The systems-based design of high-strength, high-conductivity alloys JOM 49 56–60

[125] ZhangL,QuXH,HeXB,DuanBH,RenSBandQinML 2008 Thermo-physical and mechanical properties of high volume fraction SiCp/Cu composites prepared by pressureless infiltration Mater. Sci. Eng. A 489 285–93

[126] Qin Y Q, Tian Y, Zhuang Y, Luo L M, Zan X and Wu Y C 2021 Effects of solid–liquid doping and spark plasma sintering on the microstructure and mechanical properties of Y2O3-doped copper matrix composites Vacuum 192 110436

[127] Mallik S, Ekere N, Best C and Bhatti R 2011 Investigation of thermal management materials for automotive electronic control units Appl. Therm. Eng. 31 355–62

[128] Zweben C 1992 Metal-matrix composites for electronic packaging JOM 44 15–23

[130] Hashin Z and Shtrikman S 1963 A variational approach to the theory of the elastic behaviour of multiphase materials J. Mech. Phys. Solids 11 127–40

[131] Affdl J C H and Kardos J L 1976 The Halpin-Tsai equations: a review Polym. Eng. Sci. 16 344–52

[132] Li Y, Zhao Y H, Ortalan V, Liu W, Zhang Z H, Vogt R G, Browning N D, Lavernia E J and Schoenung J M 2009 Investigation of aluminum-based nanocomposites with ultra-high strength Mater. Sci. Eng. A 527 305–16

[133] Sekine H and Chent R 1995 A combined microstructure strengthening analysis of SiCp/Al metal matrix composites Composites 26 183–8

[134] Wang M L, Chen D, Chen Z, Wu Y, Wang F F, Ma N H and Wang H W 2014 Mechanical properties of in-situ TiB2/A356 composites Mater. Sci. Eng. A 590 246–54

[135] Kim C S, Sohn I, Nezafati M, Ferguson J B, Schultz B F, Bajestani-Gohari Z, Rohatgi P K and Cho K 2013 Prediction models for the yield strength of particle-reinforced unimodal pure magnesium (Mg) metal matrix nanocomposites (MMNCs) J. Mater. Sci. 48 4191–204

[136] Sanaty-Zadeh A 2012 Comparison between current models for the strength of particulate-reinforced metal matrix nanocomposites with emphasis on consideration of Hall-Petch effect Mater. Sci. Eng. A 531 112–8

[137] GaoYL,Kou SQ,DaiJN,WangZF, ShuSL,ZhangS, Qiu F and Jiang Q C 2021 Microstructural configuration and compressive deformation behavior of a TiAl composite reinforced by Mn and in situ Ti2AlC particles Mater. Sci. Eng. A 823 141772

[138] LiQ,QiuF, GaoYY, DongBX,ShuSL,LvMM, Yang H Y, Zhao Q L and Jiang Q C 2019 Microstructure refinement and strengthening mechanisms of bimodal-sized and dual-phased (TiCn-Al3Tim)/Al hybrid composites assisted ultrasonic vibration J. Alloys Compd. 788 1309–21

[139] Mirza F A and Chen D L 2012 An analytical model for predicting the yield strength of particulate-reinforced metal matrix nanocomposites with consideration of porosity Nanosci. Nanotechnol. Lett. 4 794–800

[140] Bhat A, Balla V K, Bysakh S, Basu D, Bose S and Bandyopadhyay A 2011 Carbon nanotube reinforced Cu-10Sn alloy composites: mechanical and thermal properties Mater. Sci. Eng. A 528 6727–32

[141] Geng R, Qiu F and Jiang Q C 2018 Reinforcement in Al matrix composites: a review of strengthening behavior of nano-sized particles Adv. Eng. Mater. 20 1701089

[142] Hull D and Bacon D J 2011 Origin and multiplication of dislocations Introduction to Dislocations 5th edn, ed D Hull and D J Bacon (Amsterdam: Elsevier) pp 157–69

[143] Shu K M and Tu G C 2003 The microstructure and the thermal expansion characteristics of Cu/SiCp composites Mater. Sci. Eng. A 349 236–47

[144] Fan YM,GuoH,XuJ,ChuK,ZhuXXandJiaCC2011 Effects of boron on the microstructure and thermal properties of Cu/diamond composites prepared by pressure infiltration Int. J. Miner. Metall. Mater. 18 472–8

[145] Sinha V and Spowart J E 2013 Influence of interfacial carbide layer characteristics on thermal properties of copper-diamond composites J. Mater. Sci. 48 1330–41

[146] Fei W D, Hu M and Yao C K 2003 Thermal expansion and thermal mismatch stress relaxation behaviors of SiC whisker reinforced aluminum composite Mater. Chem. Phys. 77 882–8

[147] Sharma N K, Misra R K and Sharma S 2016 Modeling of thermal expansion behavior of densely packed Al/SiC composites Int. J. Solids Struct. 102–103 77–88

[148] Gad S I, Attia M A, Hassan M A and El-Shafei A G 2021 A random microstructure-based model to study the effect of the shape of reinforcement particles on the damage of elastoplastic particulate metal matrix composites Ceram. Int. 47 3444–61

[149] Gao X, Zhang X X and Geng L 2019 Strengthening and fracture behaviors in SiCp/Al composites with network particle distribution architecture Mater. Sci. Eng. A 740–741 353–62

[150] Li J C, Chen X W and Huang F L 2018 On the mechanical properties of particle reinforced metallic glass matrix composites J. Alloys Compd. 737 271–94

[151] Wu Q, Xu W X and Zhang L C 2019 Microstructure-based modelling of fracture of particulate reinforced metal matrix composites Composites B 163 384–92

[152] Liu N, Zhang Q Q, Zhang H Y, Cao F, Feng P F, Zuo Y F, Jiang Y H, Tang W T and Liang S H 2022 Experimental verification and numerical analysis on plastic deformation and mechanical properties of the in-situ TiB2 homogeneous composites and TiB2/Cu network composites prepared by powder metallurgy J. Alloys Compd. 920 165897

[153] Zhang J, Ouyang Q B, Guo Q, Li Z Q, Fan G F, Zuo Y F, Jiang Y H, Tang W T and Liang S H 2016 3D microstructure-based finite element modeling of deformation and fracture of SiCp/Al composites Compos. Sci. Technol. 123 1–9

[154] Karadeniz Z H and Kumlutas D 2007 A numerical study on the coefficients of thermal expansion of fiber reinforced composite materials Compos. Struct. 78 1–10

[155] Davis L C and Artz B E 1995 Thermal conductivity of metal-matrix composites J. Appl. Phys. 77 4954–60

[156] León-Pati.no C A, Braulio-Sánchez M, Aguilar-Reyes E A and Bedolla-Becerril E 2019 Microstructure, mechanical and thermal properties of Ni matrix composites reinforced with high-volume TiC J. Alloys Compd. 792 1102–11

[157] Chen G Q, Yang W S, Dong R H, Hussain M and Wu G H 2014 Interfacial microstructure and its effect on thermal conductivity of SiCp/Cu composites Mater. Des. 63 109–14

[158] Molina J M, Prieto R, Narciso J and Louis E 2009 The effect of porosity on the thermal conductivity of Al-12wt.% Si/SiC composites Scr. Mater. 60 582–5

[159] Chu K, Jia C C, Liang X B, Chen H and Guo H 2009 The thermal conductivity of pressure infiltrated SiCp/Al composites with various size distributions: experimental study and modeling Mater. Des. 30 3497–503

[160] Fu X L, Hu Y B, Peng G and Tao J 2017 Effect of reinforcement content on the density, mechanical and tribological properties of Ti3SiC2/Al2O3 hybrid reinforced copper-matrix pantograph slide Sci. Eng. Compos. Mater. 24 807–15

[161] WeiHM,ZouJP, GongYR,LiXY, ZhanWYandLiFY 2022 Effects of Ti2SnC on the mechanical properties and tribological properties of copper/graphite composites Ceram. Int. 48 36853–9

[162] Ngai T L, Zheng W and Li Y Y 2013 Effect of sintering temperature on the preparation of Cu–Ti3SiC2 metal matrix composite Prog. Nat. Sci.: Mater. Int. 23 70–76

[163] Zhang J, Wang J Y and Zhou Y C 2007 Structure stability of Ti3AlC2 in Cu and microstructure evolution of Cu–Ti3AlC2 composites Acta Mater. 55 4381–90

[164] Huang X C, Feng Y, Qian G, Zhao H, Zhang J C and Zhang X B 2018 Physical, mechanical, and ablation properties of Cu–Ti3AlC2 composites with various Ti3AlC2 contents Mater. Sci. Technol. 34 757–62

[165] LiuY, TangXH,ZhouSF, GuoBS,ZhangZGandLiW 2022 Improving mechanical properties of Cu/Ti3AlC2 composites via in-situ decomposed gradient interfaces Mater. Sci. Eng. A 834 142615

[166] Salvo C, Chicardi E, Hernández-Saz J, Aguilar C, Gnanaprakasam P and Mangalaraja R V 2021 Microstructure, electrical and mechanical properties of Ti2AlN MAX phase reinforced copper matrix composites processed by hot pressing Mater. Charact. 171 110812

[167] Jahani A, Jamshidi Aval H, Rajabi M and Jamaati R 2022 Effects of Ti2SnC MAX phase on microstructure, mechanical, electrical, and wear properties of stir-extruded copper matrix composite Adv. Eng. Mater. 25 2201463

[168] Zhang R, Chen B, Liu F Y, Sun M, Zhang H M and Wu C L 2022 Microstructure and mechanical properties of composites obtained by spark plasma sintering of Ti3SiC2-15 vol.%Cu mixtures Materials 15 2515

[169] Fathy A, Wagih A and Abu-Oqail A 2019 Effect of ZrO2 content on properties of Cu-ZrO2 nanocomposites synthesized by optimized high energy ball milling Ceram. Int. 45 2319–29

[170] Nan L, Xi Z, Qiangqiang Z, Yihui J, Yishi S, Qian L, Pengfa F, Wenting T and Shuhua L 2022 Numerical evaluation and experimental verification of mechanical properties and fracture behavior for TiB2/Cu composites prepared by in-situ mixing casting J. Alloys Compd. 895 162475

[171] Shen M J, Wang X J, Ying T, Wu K and Song W J 2016 Characteristics and mechanical properties of magnesium matrix composites reinforced with micron/submicron/nano SiC particles J. Alloys Compd. 686 831–40

[172] Zhang L J, Qiu F, Wang J G, Wang H Y and Jiang Q C 2015 Microstructures and mechanical properties of the Al2014 composites reinforced with bimodal sized SiC particles Mater. Sci. Eng. A 637 70–74

[173] Shen M J, Wang X J, Zhang M F, Zheng M Y and Wu K 2015 Significantly improved strength and ductility in bimodal-size grained microstructural magnesium matrix composites reinforced by bimodal sized SiCp over traditional magnesium matrix composites Compos. Sci. Technol. 118 85–93

[174] Tian W S, Zhao Q L, Geng R, Qiu F and Jiang Q C 2018 Improved creep resistance of Al-Cu alloy matrix composite reinforced with bimodal-sized TiCp Mater. Sci. Eng. A 713 190–4

[175] Tian W S, Zhao Q L, Zhang Q Q, Qiu F and Jiang Q C 2018 Enhanced strength and ductility at room and elevated temperatures of Al-Cu alloy matrix composites reinforced with bimodal-sized TiCp compared with monomodal–sized TiCp Mater. Sci. Eng. A 724 368–75

[176] Ma S M, Zhuang X C and Wang X M 2019 3D micromechanical simulation of the mechanical behavior of an in-situ Al3Ti/A356 composite Composites B 176 107115

[177] Yan Y W, Geng L and Li A B 2007 Experimental and numerical studies of the effect of particle size on the deformation behavior of the metal matrix composites Mater. Sci. Eng. A 448 315–25

[178] Wang C C, Min G H and Kang S B 2009 Electrical behavior of SiCp reinforced copper matrix composites by hot pressing Adv. Mater. Res. 79–82 1579–82

[179] Geng L and Yan Y W 2007 Effects of particle size on the thermal physical properties of SiCp/Al composites Key Eng. Mater. 351 131–4

[180] Elomari S, Skibo M D, Sundarrajan A and Richards H 1998 Thermal expansion behavior of particulate metal-matrix composites Compos. Sci. Technol. 58 369–76

[181] Efe G C, Ipek M, Zeytin S and Bindal C 2012 An investigation of the effect of SiC particle size on Cu-SiC composites Composites B 43 1813–22

[182] Xuan Q Q, Shu S L, Qiu F, Jin S B and Jiang Q C 2012 Different strain-rate dependent compressive properties and work-hardening capacities of 50vol% TiCx/Al and TiB2/Al composites Mater. Sci. Eng. A 538 335–9

[183] Meijer G, Ellyin F and Xia Z 2000 Aspects of residual thermal stress/strain in particle reinforced metal matrix composites Composites B 31 29–37

[184] Chen C R, Qin S Y, Li S X and Wen J L 2000 Finite element analysis about effects of particle morphology on mechanical response of composites Mater. Sci. Eng. A 278 96–105

[185] Liu N, Zhang X, Zhang X D, Feng P F, Zuo Y F, Cao F, Su Y S, Jiang Y H and Liang S H 2022 Numerical investigations on the hybrid effect and deformation mechanism of TiB2p and TiBw reinforced Cu composites prepared by in-situ mixing casting Comput. Mater. Sci. 213 111657

[186] Chmielewski M, Pietrzak K, Teodorczyk M, Nosewicz S, Jarza.bek D, Zyba.a R, Bazarnik P, Lewandowska M and Strojny-Ne.dza A 2017 Effect of metallic coating on the properties of copper-silicon carbide composites Appl. Surf. Sci. 421 159–69

[187] YangHY, Yan YF, LiuTS,DongBX,ChenLY, ShuSL, Qiu F, Jiang Q C and Zhang L C 2021 Unprecedented enhancement in strength-plasticity synergy of (TiC+Al6MoTi+Mo)/Al cermet by multiple length-scale microstructure stimulated synergistic deformation Composites B 225 109265

[188] Yan YF, Kou SQ,YangHY, DongBX,ShuSL,ChenLY, Qiu F and Zhang L C 2023 Manipulating interface bonding and microstructure via tuning interfacial reaction for enhancing mechanical property of in-situ TiC/Al cermets J. Mater. Process. Technol. 317 117995

[189] Hu Y B and Cong W L 2018 A review on laser deposition-additive manufacturing of ceramics and ceramic reinforced metal matrix composites Ceram. Int. 44 20599–612

[190] Mitra R and Mahajan Y R 1995 Interfaces in discontinuously reinforced metal matrix composites: an overview Bull. Mater. Sci. 18 405–34

[191] Yang H Y, Wang Z, Chen L Y, Shu S L, Qiu F and Zhang L C 2021 Interface formation and bonding control in high-volume-fraction (TiC+TiB2)/Al composites and their roles in enhancing properties Composites B 209 108605

[192] Zhao C and Wang J 2013 Enhanced mechanical properties in diamond/Cu composites with chromium carbide coating for structural applications Mater. Sci. Eng. A 588 221–7

[193] Weber L and Tavangar R 2007 On the influence of active element content on the thermal conductivity and thermal expansion of Cu-X (X = Cr, B) diamond composites Scr. Mater. 57 988–91

[194] Zhang C C, Luo G Q, Zhang J, Dai Y, Shen Q and Zhang L M 2017 Synthesis and thermal conductivity improvement of W-Cu composites modified with WC interfacial layer Mater. Des. 127 233–42

[195] ZhangL,QuXH,DuanBH,HeXB,RenSBandQinML 2009 Thermal expansion behaviour of SiCp/Cu composites prepared by spark plasma sintering and pressureless infiltration Powder Metall. 52 17–23

[196] Wang Y, Xu Y H, Cao Z Y, Yan C, Wang K, Chen J J, Cheng S Y and Feng Z S 2019 A facile process to manufacture high performance copper layer on ceramic material via biomimetic modification and electroless plating Composites B 157 123–30

[197] Tian Y N, Dou Z H, Niu L P and Zhang T A 2019 Studies on copper-coated boron carbide particle-reinforced copper-matrix/graphite self-lubricating composite materials Russ. J. Non-Ferr. Met. 60 575–82

[198] Xiang S Q, Du X J, Liang Y H, Zhou M C and Zhang X F 2021 Optimizing phase interface of titanium carbide-reinforced copper matrix composites fabricated by electropulsing-assisted flash sintering Mater. Sci. Eng. A 819 141506