[1] Fang F Z, Zhang X D and Hu X T 2008 Cylindrical coordinate machining of optical freeform surfaces Opt. Express 16 7323-9

[2] Ye J F, Chen L, Li X H, Yuan Q and Gao Z S 2017 Review of optical freeform surface representation technique and its application Opt. Eng. 56 110901

[3] Zhang Z Y, Yan J W and Kuriyagawa T 2019 Manufacturing technologies toward extreme precision Int. J. Extreme Manuf. 1 022001

[4] Cheng D W, Wang Y T, Hua H and Talha M M 2009 Design of an optical see-through head-mounted display with a low f-number and large field of view using a freeform prism Appl. Opt. 48 2655-68

[5] Jiang X, Scott P and Whitehouse D 2007 Freeform surface characterisation—a fresh strategy CIRP Ann. 56 553-6

[6] De Chiffre L, Kunzmann H, Peggs G N and Lucca D A 2003 Surfaces in precision engineering, microengineering and nanotechnology CIRP Ann. 52 561-77

[7] Mukaida M and Yan J W 2017 Ductile machining of single-crystal silicon for microlens arrays by ultraprecision diamond turning using a slow tool servo Int. J. Mach. Tools Manuf. 115 2-14

[8] Weck M, Hennig J and Hilbing R 2001 Precision cutting processes for manufacturing of optical components Proc. SPIE 4440, Lithographic and Micromachining Techniques for Optical Component Fabrication (San Diego, CA: SPIE) pp 145-51

[9] Zhu W H, Jun M B and Altintas Y 2001 A fast tool servo design for precision turning of shafts on conventional CNC lathes Int. J. Mach. Tools Manuf. 41 953-65

[10] Rakuff S and Cuttino J F 2009 Design and testing of a long-range, precision fast tool servo system for diamond turning Precis. Eng. 33 18-25

[11] Kim H S, Kim E J and Song B S 2004 Diamond turning of large off-axis aspheric mirrors using a fast tool servo with on-machine measurement J. Mater. Process. Technol. 146 349-55

[12] Kim H S and Kim E J 2003 Feed-forward control of fast tool servo for real-time correction of spindle error in diamond turning of flat surfaces Int. J. Mach. Tools Manuf. 43 1177-83

[13] Precitech 2021 Fast tool servo (available at: www.precitech. com/product/accessoriesoverview/fasttoolservo (accessed 18 November 2021))

[14] To S, Kwok T C, Cheung C F and Lee W B 2005 Study of ultra-precision diamond turning of a microlens array with a fast tool servo system Proc. SPIE 6149 61490S

[15] Yu D P, Gan S W, Wong Y S, Hong G S, Rahman M and Yao J 2012 Optimized tool path generation for fast tool servo diamond turning of micro-structured surfaces Int. J. Adv. Manuf. Technol. 63 1137-52

[16] Zhu Z W and To S 2015 Adaptive tool servo diamond turning for enhancing machining efficiency and surface quality of freeform optics Opt. Express 23 20234-48

[17] Dick L, Risse S and Tünnermann A 2021 Injection molded high precision freeform optics for high volume applications Adv. Opt. Technol. 1 213-4

[18] Zhou M, Zhang H J and Chen S J 2010 Study on diamond cutting of nonrationally symmetric microstructured surfaces with fast tool servo Mater. Manuf. Process. 25 488-94

[19] Neo D W K, Kumar A S and Rahman M 2014 A novel surface analytical model for cutting linearization error in fast tool/slow slide servo diamond turning Precis. Eng. 38 849-60

[20] Gong H, Wang Y, Song L and Fang F Z 2015 Spiral tool path generation for diamond turning optical freeform surfaces of quasi-revolution Comput. Aided Des. 59 15-22

[21] Scheiding S, Yi A Y, Gebhardt A, Li L, Risse S, Eberhardt R and Tünnermann A 2011 Freeform manufacturing of a microoptical lens array on a steep curved substrate by use of a voice coil fast tool servo Opt. Express 19 23938-51

[22] Gao W, Araki T, Kiyono S, Okazaki Y and Yamanaka M 2003 Precision nano-fabrication and evaluation of a large area sinusoidal grid surface for a surface encoder Precis. Eng. 27 289-98

[23] Kasztelanic R, Filipkowski A, Pysz D, Stepien R, Waddie A J, Taghizadeh M R and Buczynski R 2017 High resolution Shack-Hartmann sensor based on array of nanostructured GRIN lenses Opt. Express 25 1680-91

[24] Oliveira O G, de Lima Monteiro D W and Costa R F O 2014 Optimized microlens-array geometry for Hartmann-Shack wavefront sensor Opt. Lasers Eng. 55 155-61

[25] Press W H, Teukolsky S A, Vetterling W T and Flannery B P 1992 Numerical Recipes in C : The Art of Scientific Computing 2nd edn (Cambridge: Cambridge University Press) pp 123-4

[26] Li D, Qiao Z, Walton K, Liu Y T, Xue J D, Wang B and Jiang X Q 2018 Theoretical and experimental investigation of surface topography generation in slow tool servo ultra-precision machining of freeform surfaces Materials 11 2566

[27] Yu D P, Wong Y S and Hong G S 2011 Optimal selection of machining parameters for fast tool servo diamond turning Int. J. Adv. Manuf. Technol. 57 85-99

[28] Liu X L, Zhang X D, Fang F Z, Zeng Z, Gao H M and Hu X T 2015 Influence of machining errors on form errors of microlens arrays in ultra-precision turning Int. J. Mach. Tools Manuf. 96 80-93

[29] Nagayama K and Yan J W 2020 Measurement and compensation of tool contour error using white light interferometry for ultra-precision diamond turning of freeform surfaces Int. J. Autom. Technol. 14 654-64

[30] Nagayama K and Yan J W 2021 Deterministic error compensation for slow tool servo-driven diamond turning of freeform surface with nanometric form accuracy J. Manuf. Process. 64 45-57

[31] Yu D P, Hong G S and Wong Y S 2011 Integral sliding mode control for fast tool servo diamond turning of micro-structured surfaces Int. J. Autom. Technol. 5 4-10

[32] Yu D P, Hong G S and Wong Y S 2012 Profile error compensation in fast tool servo diamond turning of micro-structured surfaces Int. J. Mach. Tools Manuf. 52 13-23

[33] Mukaida M and Yan J W 2017 Fabrication of hexagonal microlens arrays on single-crystal silicon using the tool-servo driven segment turning method Micromachines 8 323