[1] Wang X H. Iron castings temperature field numerical analysis by laser cutting the stress-raising groove［D］. Changchun: Jilin University, 2010.
[2] Yu F Y. Numerical simulation on CW-laser cutting the C70S6 fracture splitting notch［D］. Changchun: Jilin University, 2013.
[3] Yang J H. Study of the experiment and numerical simulation on laser drilling for 0Cr18Ni9 stainless steel［D］. Nanchang: Nanchang Hangkong University, 2011.
[4] Ye S L, Ma J S, Huang X. Simulation of the temperature field in laser cutting of brittle materials［J］. Optical Technique, 2007, 33(4): 599-601.
[5] Yuan W, Li Z G, Cai Y G. Simulation of ANSYS-based laser cutting temperature field［J］. Journal of Changchun University, 2013, 23(12): 1561-1564.
[6] Kashani M M, Movahhedy M R, Ahmadia M T, et al. Analytical prediction of the temperature field in laser assisted machining［J］. Procedia CIRP, 2016, 46: 575-578.
[7] Akhtar S S, Yilbas B S. Laser treatment of steel surfaces: Numerical and experimental investigations of temperature and stress fields［M］∥ Hashmi S, Batalha G F. Comprehensive Materials Processing. Amsterdam : Elsevier Ltd. , 2014: 25-46.
[8] Negarestani R, Sundar M, Sheikh M A, et al. Numerical simulation of laser machining of carbon-fibre-reinforced composites［J］. Proceedings of the Institution of Mechanical Engineers, 2010, 224(7): 1017-1027.
[10] Chen Y. Research on temperature field numerical simulation and performance of laser re-melted Ni-coating oriented by jet electroforming on 45 steel［D］. Nanjing: Nanjing University of Aeronautics and Astronautics, 2007.
[11] Kar A, Rothenflue J A, Latham W P. Scaling laws for thick-section cutting with a chemical oxygen-iodine laser［J］. Journal of Laser Applications, 1997, 9(6): 279-286.
[12] Cenna A A, Mathew P. Analysis and prediction of laser cutting parameters of fibre reinforced plastics (FRP) composite materials［J］. International Journal of Machine Tools & Manufacture, 2002, 42(1): 105-113.
[13] Herzog D, Jaeschke P, Meier O, et al. Investigations on the thermal effect caused by laser cutting with respect to static strength of CFRP［J］. International Journal of Machine Tools & Manufacture, 2008, 48(12/13): 1464-1473.
[14] Chen C, Gao M, Gu Y Z, et al. Study on fiber laser cutting of aluminum alloy sheet［J］. Chinese Journal of Lasers, 2014, 41(6): 0603004.
[16] Xie L C, Quan Y J. Status and development of laser processing of magnesium alloys［J］. Mining and Metallurgical Engineering, 2012, 32(6): 120-124.
[17] Rajamani D, Tamilarasan A. Fuzzy and regression modeling for Nd∶YAG laser cutting of Ti-6Al-4V superalloy sheet［J］. Journal for Manufacturing Science and Production, 2016, 16(3): 153-162.
[18] Mishra S, Sridhara N, Mitra A, et al. CO2 laser cutting of ultra thin (75 μm) glass based rigid optical solar reflector (OSR) for spacecraft application［J］. Optics and Lasers in Engineering, 2017, 90: 128-138.
[19] Ozaki H, Le M Q, Kawakami H, et al. Real-time observation of laser cutting fronts by X-ray transmission［J］. Journal of Materials Processing Technology, 2016, 237: 181-187.
[20] Pocorni J, Powell J, Deichsel E, et al. Fibre laser cutting stainless steel: Fluid dynamics and cut front morphology［J］. Optics & Laser Technology, 2017, 87: 87-93.
[21] Manjoth S, Keshavamurthy R, Kumar G S P. Optimization and analysis of laser beam machining parameters for Al7075-TiB2 in-situ composite［J］. IOP Conference Series: Materials Science and Engineering, 2016, 149: 012013.
[22] Srinivasan S, Kadadevaramath R S, Kumar V, et al. Optimization of material removal rate and surface roughness in laser cutting machine by Taguchi method［J］. International Journal of Innovative Research in Science Engineering and Technology, 2015, 4(6): 4993-4998.
[23] Madi M, Radovanovi M, Mani M, et al. Optimization of CO2 laser cutting process using Taguchi and dual response surface methodology［J］. Tribology in Industry, 2014, 36(3): 236-243.
[24] Chen X Y, Li T C, Zhai K, et al. Using orthogonal experimental method optimizing surface quality of CO2 laser cutting process for PMMA microchannels［J］. International Journal of Advanced Manufacturing Technology, 2017, 88: 2727-2733.
[25] Gui R S. Study of temperature distributions of layered-materials irradiated by Gaussian laser［D］. Suzhou: Suzhou University, 2008.
[26] Guo Z Q, Wu W J, Man Y H, et al. Phase change analysis of PCM by ANSYS finite element method［J］. New Technology & New Process, 2007(11): 87-89.
[27] Cui Z Q. Research on pulsed laser processing behavior of AZ31B magnesium alloy［D］. Taiyuan: Taiyuan University of Techonology, 2011.
[28] Ren N F, Zhang W, Wang H X, et al. Process optimization for pulsed laser drilling of 20Cr13 sheets based on orthogonal experiments［J］. Laser ＆ Optoelectronics Progress, 2016, 53(3): 031410.
