[1] MacCH,ChanHY, LinYH,SharmaAK,SongHL, Chan YS, Lin K J, Lin Y J and Sung H W2022 Engineering a biomimetic bone scaffold that can regulate redox homeostasis and promote osteogenesis to repair large bone defects Biomaterials 286 121574

[2] Jiang C Y et al 2021 Self-healing polyurethane-elastomer with mechanical tunability for multiple biomedical applications in vivo Nat. Commun. 12 4395

[3] Henkel J et al 2021 Scaffold-guided bone regeneration in large volume tibial segmental defects Bone 153 116163

[4] Sparks D S et al 2020 A preclinical large-animal model for the assessment of critical-size load-bearing bone defect reconstruction Nat. Protocols 15 877–924

[5] Koons G L, Diba M and Mikos A G 2020 Materials design for bone-tissue engineering Nat. Rev. Mater. 5 584–603

[6] Collins M N, Ren G, Young K, Pina S, Reis R L and Oliveira J M 2021 Scaffold fabrication technologies and structure/function properties in bone tissue engineering Adv. Funct. Mater. 31 2010609

[7] Turnbull G, Clarke J, Picard F, Riches P, Jia L L, Han F X, Li B and Shu W M 2018 3D bioactive composite scaffolds for bone tissue engineering Bioact. Mater. 3 278–314

[8] Kazimierczak P, Benko A, Palka K, Canal C, Kolodynska D and Przekora A 2020 Novel synthesis method combining a foaming agent with freeze-drying to obtain hybrid highly macroporous bone scaffolds J. Mater. Sci. Technol. 43 52–63

[9] LeiB,ShinKH,JoIH,KohYHandKimHE2014Highly porous gelatin–silica hybrid scaffolds with textured surfaces using new direct foaming/freezing technique Mater. Chem. Phys. 145 397–402

[10] Zhang X D, Li L F, Ouyang J, Zhang L Q, Xue J J, Zhang H and Tao W 2021 Electroactive electrospun nanofibers for tissue engineering Nano Today 39 101196

[11] Dong Y, Chen A N, Yang T, Gao S, Liu S N, Jiang H Y, Shi Y S and Hu C L 2023 Ultra-lightweight ceramic scaffolds with simultaneous improvement of pore interconnectivity and mechanical strength J. Mater. Sci. Technol. 137 247–58

[12] Sinha R, Cámara-Torres M, Scopece P, Verga Falzacappa E, Patelli A, Moroni L and Mota C 2021 A hybrid additive manufacturing platform to create bulk and surface composition gradients on scaffolds for tissue regeneration Nat. Commun. 12 500

[13] KimD,HanSA,KimJH,LeeJH,KimSWandLeeSW 2020 Biomolecular piezoelectric materials: from amino acids to living tissues Adv. Mater. 32 1906989

[14] Zheng T Y, Huang Y Q, Zhang X H, Cai Q, Deng X L and Yang X P 2020 Mimicking the electrophysiological microenvironment of bone tissue using electroactive materials to promote its regeneration J. Mater. Chem. B 8 10221–56

[15] Fukada E and Yasuda I 1957 On the piezoelectric effect of bone J. Phys. Soc. Japan 12 1158–62

[16] Park J B, Kelly B J, Kenner G H, von Recum A F, Grether M F and Coffeen W W 1981 Piezoelectric ceramic implants: in vivo results J. Biomed. Mater. Res. 15 103–10

[17] Lipiec E, Kowalska J, Wieche′c A, Zieli′nski P M, Kwiatek W M and Iwaniec M 2012 Infrared spectroscopy in molecular study of the piezoelectric effect in pig’s shin bone Acta Phys. Pol. A 121 539–42

[18] Jacob J, More N, Kalia K and Kapusetti G 2018 Piezoelectric smart biomaterials for bone and cartilage tissue engineering Inflamm. Regen. 38 2

[19] Ribeiro C, Correia D M, Rodrigues I, Guard.ao L, Guimar.aes S, Soares R and Lanceros-Méndez S 2017 In vivo demonstration of the suitability of piezoelectric stimuli for bone reparation Mater. Lett. 209 118–21

[20] Khare D, Basu B and Dubey A K 2020 Electrical stimulation and piezoelectric biomaterials for bone tissue engineering applications Biomaterials 258 120280

[21] Rajabi A H, Jaffe M and Arinzeh T L 2015 Piezoelectric materials for tissue regeneration: a review Acta Biomater. 24 12–23

[22] Liu Y et al 2017 Built-in electric fields dramatically induce enhancement of osseointegration Adv. Funct. Mater. 27 1703771

[23] Tandon B, Blaker J J and Cartmell S H 2018 Piezoelectric materials as stimulatory biomedical materials and scaffolds for bone repair Acta Biomater. 73 1–20

[24] Mokhtari F, Azimi B, Salehi M, Hashemikia S and Danti S 2021 Recent advances of polymer-based piezoelectric composites for biomedical applications J. Mech. Behav. Biomed. Mater. 122 104669

[25] Zeng Y S, Jiang L M, He Q Q, Wodnicki R, Yang Y, Chen Y and Zhou Q F 2022 Recent progress in 3D printing piezoelectric materials for biomedical applications J. Appl. Phys. 55 013002

[26] LiuG,HeYH,LiuPC,ChenZ,ChenXL,Wan L,LiYand Lu J 2020 Development of bioimplants with 2D, 3D, and 4D additive manufacturing materials Engineering 6 1232–43

[27] Pourmasoumi P, Moghaddam A, Nemati Mahand S, Heidari F, Salehi Moghaddam Z, Arjmand M, Kühnert I, Kruppke B, Wiesmann H P and Khonakdar H A 2023 A review on the recent progress, opportunities, and challenges of 4D printing and bioprinting in regenerative medicine J. Biomater. Sci. Polym. Ed. 34 108–46

[28] Valasek J 1921 Piezo-electric and allied phenomena in Rochelle salt Phys. Rev. 17 475–81

[29] Zheng T, Wu J G, Xiao D Q and Zhu J G 2018 Recent development in lead-free perovskite piezoelectric bulk materials Prog. Mater. Sci. 98 552–624

[30] Leppik L, Oliveira K M C, Bhavsar M B and Barker J H 2020 Electrical stimulation in bone tissue engineering treatments Eur. J. Trauma Emerg. Surg. 46 231–44

[31] Chen C, Bai X, Ding Y H and Lee I S 2019 Electrical stimulation as a novel tool for regulating cell behavior in tissue engineering Biomater. Res. 23 25

[32] Tan HW, ChoongYYC,Kuo CN,Low HYandChuaCK 2022 3D printed electronics: processes, materials and future trends Prog. Mater. Sci. 127 100945

[33] Athukorala S S, Tran T S, Balu R, Truong V K, Chapman J, Dutta N K and Roy Choudhury N 2021 3D printable electrically conductive hydrogel scaffolds for biomedical applications: a review Polymers 13 474

[34] Kapat K, Shubhra Q T H, Zhou M and Leeuwenburgh S 2020 Piezoelectric nano-biomaterials for biomedicine and tissue regeneration Adv. Funct. Mater. 30 1909045

[35] Liu Z R, Wan X Y, Wang Z L and Li L L 2021 Electroactive biomaterials and systems for cell fate determination and tissue regeneration: design and applications Adv. Mater. 33 2007429

[36] Pai A R, Thomas S M and Thomas S 2022 Polysaccharide-based nanocomposites for energy-harvesting nanogenerators Engineered Polymer Nanocomposites for Energy Harvesting Applications ed M T Rahul, S Thomas, D Rouxel, N Kalarikkal, B Ameduri and R Balakrishnan (Amsterdam: Elsevier) pp 159–80

[37] de Alvarenga G, Bach-Toledo L, Klobukoski V, Deller A, Ruthes J G D A, Silva R J, de Paula J I S, Vidotti M and Hryniewicz B M 2022 Overview of electroactive polymers Electroactive Polymeric Materials ed Inamuddin, M I Ahamed, R Boddula and A A Gobouri (Boca Raton, FL: CRC Press)

[38] Ramadan K S, Sameoto D and Evoy S 2014 A review of piezoelectric polymers as functional materials for electromechanical transducers Smart Mater. Struct. 23 033001

[39] Zheng Y B, Tang N, Omar R, Hu Z P, Duong T, Wang J, Wu W W and Haick H 2021 Smart materials enabled with artificial intelligence for healthcare wearables Adv. Funct. Mater. 31 2105482

[40] Gandhi A A, Wojtas M, Lang S B, Kholkin A L and Tofail S A M 2014 Piezoelectricity in poled hydroxyapatite ceramics J. Am. Ceram. Soc. 97 2867–72

[41] Saeidi B, Derakhshandeh M R, Delshad Chermahini M and Doostmohammadi A 2020 Novel porous barium titanate/nano-bioactive glass composite with high piezoelectric coefficient for bone regeneration applications J. Mater. Eng. Perform. 29 5420–7

[42] ChenJQ,LiWP, ZhouL,ZhouZN,Tan GX,ChenDF, Wang R X, Yu P and Ning C Y 2018 A built-in electric field with nanoscale distinction for cell behavior regulation J. Mater. Chem. B 6 2723–7

[43] Florencio-Silva R, da Silva Sasso G R, Sasso-Cerri E, Sim.oes M J and Cerri P S 2015 Biology of bone tissue: structure, function, and factors that influence bone cells BioMed Res. Int. 2015 421746

[44] Liu Y, Luo D and Wang T 2016 Hierarchical structures of bone and bioinspired bone tissue engineering Small 12 4611–32

[45] Kamel N A 2022 Bio-piezoelectricity: fundamentals and applications in tissue engineering and regenerative medicine Biophys. Rev. 14 717–33

[46] Yang C Y, Ji J Y, Lv Y J, Li Z and Luo D 2022 Application of piezoelectric material and devices in bone regeneration Nanomaterials 12 4386

[47] Martins P M, Ribeiro S, Ribeiro C, Sencadas V, Gomes A C, Gama F M and Lanceros-Méndez S 2013 Effect of poling state and morphology of piezoelectric poly(vinylidene fluoride) membranes for skeletal muscle tissue engineering RSC Adv. 3 17938–44

[48] ShuaiCJ,ZengZC,YangYW, QiFW, PengSP, Yang W J,HeCX, Wang G Y and Qian G W 2020 Graphene oxide assists polyvinylidene fluoride scaffold to reconstruct electrical microenvironment of bone tissue Mater. Des. 190 108564

[49] Orkwis J A, Wolf A K, Shahid S M, Smith C, Esfandiari L and Harris G M 2020 Development of a piezoelectric PVDF-TrFE fibrous scaffold to guide cell adhesion, proliferation, and alignment Macromol. Biosci. 20 2000197

[50] Das R et al 2020 Biodegradable nanofiber bone-tissue scaffold as remotely-controlled and self-powering electrical stimulator Nano Energy 76 105028

[51] Rodriguez R, Rangel D, Fonseca G, Gonzalez M and Vargas S 2016 Piezoelectric properties of synthetic hydroxyapatite-based organic-inorganic hydrated materials Results Phys. 6 925–32

[52] Badurova K, Plesch G, Markham S, Nepal M, Silien C, Tofail S A M and Haq E U 2020 Piezoelectricity in Sr doped thick films of hydroxyapatite IEEE Trans. Dielectr. Electr. Insul. 27 1409–14

[53] Ball J P, Mound B A, Nino J C and Allen J B 2014 Biocompatible evaluation of barium titanate foamed ceramic structures for orthopedic applications J. Biomed. Mater. Res. A 102 2089–95

[54] Yu SW, Kuo ST, Tuan WH,TsaiYYandWangSF2012 Cytotoxicity and degradation behavior of potassium sodium niobate piezoelectric ceramics Ceram. Int. 38 2845–50

[55] Bonadio T G M et al 2017 Polyvinylidene fluoride/hydroxyapatite/β-tricalcium phosphate multifunctional biocomposite: potentialities for bone tissue engineering Curr. Appl. Phys. 17 767–73

[56] ShuaiCJ,LiuGF, YangYW, QiFW, PengSP, YangWJ, He C X, Wang G Y and Qian G W 2020 A strawberry-like Ag-decorated barium titanate enhances piezoelectric and antibacterial activities of polymer scaffold Nano Energy 74 104825

[57] Shuai C J, Yang W J, Feng P, Peng S P and Pan H 2021 Accelerated degradation of HAP/PLLA bone scaffold by PGA blending facilitates bioactivity and osteoconductivity Bioact. Mater. 6 490–502

[58] Genchi G G, Sinibaldi E, Ceseracciu L, Labardi M, Marino A, Marras S, De Simoni G, Mattoli V and Ciofani G 2018 Ultrasound-activated piezoelectric P(VDF-TrFE)/boron nitride nanotube composite films promote differentiation of human SaOS-2 osteoblast-like cells Nanomed. Nanotechnol. Biol. Med. 14 2421–32

[59] Wu P, Chen P, Xu C, Wang Q, Zhang F C, Yang K, Jiang W, Feng J X and Luo Z Q 2022 Ultrasound-driven in vivo electrical stimulation based on biodegradable piezoelectric nanogenerators for enhancing and monitoring the nerve tissue repair Nano Energy 102 107707

[60] Prasad A, Sankar M R and Katiyar V 2017 State of art on solvent casting particulate leaching method for orthopedic Scaffolds fabrication Mater. Today Proc. 4 898–907

[61] Boudriot U, Dersch R, Greiner A and Wendorff J H 2006 Electrospinning approaches toward scaffold engineering—a brief overview Artif. Organs 30 785–92

[62] Fereshteh Z 2018 Freeze-drying technologies for 3D scaffold engineering Functional 3D Tissue Engineering Scaffolds ed Y Deng and J Kuiper (Duxford: Woodhead Publishing) pp 151–74

[63] ChenAN,Wu JM,LiuK,ChenJY, XiaoH,ChenP, LiCH and Shi Y S 2018 High-performance ceramic parts with complex shape prepared by selective laser sintering: a review Adv. Appl. Ceram. 117 100–17

[64] WeiZH,ChengLJ,MaYX,ChenAN,GuoXF, Wu JM and Shi Y S 2019 Direct fabrication mechanism of pre-sintered Si3N4 ceramic with ultra-high porosity by laser additive manufacturing Scr. Mater. 173 91–95

[65] Yan CZ,MaG,ChenAN,ChenY, Wu JM,WangW, Yang S F and Shi Y S 2020 Additive manufacturing of hydroxyapatite and its composite materials: a review J. Micromech. Mol. Phys. 5 2030002

[66] Liu G et al 2021 Additive manufacturing of structural materials Mater. Sci. Eng. 145 100596

[67] Chen A N, Qu C H, Shi Y S and Shi F F 2020 Manufacturing strategies for solid electrolyte in batteries Front. Energy Res. 8 571440

[68] ChenZW, LiZY, LiJJ,LiuCB,LaoCS,FuYL,LiuCY, Li Y, Wang P and He Y 2019 3D printing of ceramics: a review J. Eur. Ceram. Soc. 39 661–87

[69] Nepal D et al 2023 Hierarchically structured bioinspired nanocomposites Nat. Mater. 22 18–35

[70] Wang H Z et al 2022 Comparative evaluation of printability and compression properties of poly-ether-ether-ketone triply periodic minimal surface scaffolds fabricated by laser powder bed fusion Addit. Manuf. 57 102961

[71] WangHZ,ChenP, ShuZX,ChenAN,SuJ,Wu HZ, Chen Z Y, Yang L, Yan C Z and Shi Y S 2023 Laser powder bed fusion of poly-ether-ether-ketone/bioactive glass composites: processability, mechanical properties, and bioactivity Compos. Sci. Technol. 231 109805

[72] ASTM Standard F2792 2012 Standard Terminology for Additive Manufacturing Technologies (West Conshohocken: ASTM International)

[73] Vidakis N, Petousis M, Mountakis N and Kechagias J D 2022 Material extrusion 3D printing and friction stir welding: an insight into the weldability of polylactic acid plates based on a full factorial design Int. J. Adv. Manuf. Technol. 121 3817–39

[74] Saadi M A S R, Maguire A, Pottackal N T, Thakur S H, Ikram M M, Hart A J, Ajayan P M and Rahman M M 2022 Direct ink writing: a 3D printing technology for diverse materials Adv. Mater. 34 2108855

[75] Coppola B, Tardivat C, Richaud S, Tulliani J M, Montanaro L and Palmero P 2021 3D printing of dense and porous alkali-activated refractory wastes via direct ink writing (DIW) J. Eur. Ceram. Soc. 41 3798–808

[76] Zhang X Y, Huo W L, Liu J J, Zhang Y F, Zhang S H and Yang J L 2020 3D printing boehmite gel foams into lightweight porous ceramics with hierarchical pore structure J. Eur. Ceram. Soc. 40 930–4

[77] LiLY, LinQY, TangM,DuncanAJEandKe CF2019 Advanced polymer designs for direct-ink-write 3D printing Chemistry 25 10768–81

[78] Mancuso E, Shah L, Jindal S, Serenelli C, Tsikriteas Z M, Khanbareh H and Tirella A 2021 Additively manufactured BaTiO3 composite scaffolds: a novel strategy for load bearing bone tissue engineering applications Mater. Sci. Eng. C 126 112192

[79] Tariverdian T, Behnamghader A, Brouki Milan P, Barzegar-Bafrooei H and Mozafari M 2019 3D-printed barium strontium titanate-based piezoelectric scaffolds for bone tissue engineering Ceram. Int. 45 14029–38

[80] Rocha V G, Saiz E, Tirichenko I S and García-Tu.nón E 2020 Direct ink writing advances in multi-material structures for a sustainable future J. Mater. Chem. A 8 15646–57

[81] Han D and Lee H 2020 Recent advances in multi-material additive manufacturing: methods and applications Curr. Opin. Chem. Eng. 28 158–66

[82] Zhang M et al 2020 3D printing of Haversian bone–mimicking scaffolds for multicellular delivery in bone regeneration Sci. Adv. 6 eaaz6725

[83] Wang M Z, Wu H Z, Yang L, Chen A N, Chen P, Wang H Z, Chen Z Y and Yan C Z 2022 Structure design of arc-shaped auxetic metamaterials with tunable Poisson’s ratio Mech. Adv. Mater. Struct. 30 1426–36

[84] Yan C Z, Hao L, Hussein A and Young P 2015 Ti–6Al–4V triply periodic minimal surface structures for bone implants fabricated via selective laser melting J. Mech. Behav. Biomed. Mater. 51 61–73

[85] Esslinger S and Gadow R 2020 Additive manufacturing of bioceramic scaffolds by combination of FDM and slip casting J. Eur. Ceram. Soc. 40 3707–13

[86] Doshi M, Mahale A, Kumar Singh S and Deshmukh S 2022 Printing parameters and materials affecting mechanical properties of FDM-3D printed parts: perspective and prospects Mater. Today Proc. 50 2269–75

[87] Cappi B, .zkol E, Ebert J and Telle R 2008 Direct inkjet printing of Si3N4: characterization of ink, green bodies and microstructure J. Eur. Ceram. Soc. 28 2625–8

[88] Janek M et al 2020 Mechanical testing of hydroxyapatite filaments for tissue scaffolds preparation by fused deposition of ceramics J. Eur. Ceram. Soc. 40 4932–8

[89] Choi W J, Hwang K S, Kwon H J, Lee C, Kim C H, KimT H, HeoS W, KimJH and LeeJY 2020 Rapid development of dual porous poly(lactic acid) foam using fused deposition modeling (FDM) 3D printing for medical scaffold application Mater. Sci. Eng. C 110 110693

[90] Hary′nska A, Kucinska-Lipka J, Sulowska A, Gubanska I, Kostrzewa M and Janik H 2019 Medical-grade PCL based polyurethane system for FDM 3D printing—characterization and fabrication Materials 12 887

[91] Mystiridou E, Patsidis A C and Bouropoulos N 2021 Development and characterization of 3D printed multifunctional bioscaffolds based on PLA/PCL/HAp/BaTiO3 composites Appl. Sci. 11 4253

[92] Sikder P, Nagaraju P and Naganaboyina H P S 2022 3D-printed piezoelectric porous bioactive scaffolds and clinical ultrasonic stimulation can help in enhanced bone regeneration Bioengineering 9 679

[93] LiuZF et al 2022 Multimaterial additive manufacturing manipulator for fabricating magnetoelectric pressure sensors Sci. China Technol. Sci. 65 2542–50

[94] Akhoundi B, Behravesh A H and Bagheri Saed A 2018 Improving mechanical properties of continuous fiber-reinforced thermoplastic composites produced by FDM 3D printer J. Reinf. Plast. Compos. 38 99–116

[95] Matsuzaki R, Ueda M, Namiki M, Jeong T K, Asahara H, Horiguchi K, Nakamura T, Todoroki A and Hirano Y 2016 Three-dimensional printing of continuous-fiber composites by in-nozzle impregnation Sci. Rep. 6 23058

[96] Klippstein H, Diaz De Cerio Sanchez A, Hassanin H, Zweiri Y and Seneviratne L 2018 Fused deposition modeling for unmanned aerial vehicles (UAVs): a review Adv. Eng. Mater. 20 1700552

[97] ChenAN,Wu JM,LiuYX,LiuRZ,ChengLJ,HuoWL, Shi Y S and Li C H 2018 Fabrication of porous fibrous alumina ceramics by direct coagulation casting combined with 3D printing Ceram. Int. 44 4845–52

[98] Mariani M, Beltrami R, Brusa P, Galassi C, Ardito R and Lecis N 2021 3D printing of fine alumina powders by binder jetting J. Eur. Ceram. Soc. 41 5307–15

[99] Manotham S and Tesavibul P 2022 Effect of particle size on mechanical properties of alumina ceramic processed by photosensitive binder jetting with powder spattering technique J. Eur. Ceram. Soc. 42 1608–17

[100] Ziaee M and Crane N B 2019 Binder jetting: a review of process, materials, and methods Addit. Manuf. 28 781–801

[101] Fu J, Lee D U, Hassan F M, Yang L, Bai Z Y, Park M G and Chen Z W 2015 Flexible high-energy polymer-electrolyte-based rechargeable zinc-air batteries Adv. Mater. 27 5617–22

[102] Li M, Du W C, Elwany A, Pei Z J and Ma C 2020 Metal binder jetting additive manufacturing: a literature review J. Manuf. Sci. Eng. 142 090801

[103] Kim D H, Lee J, Bae J, Park S, Choi J, Lee J H and Kim E 2018 Mechanical analysis of ceramic/polymer composite with mesh-type lightweight design using binder-jet 3D printing Materials 11 1941

[104] Polley C, Distler T, Detsch R, Lund H, Springer A, Boccaccini A R and Seitz H 2020 3D printing of piezoelectric barium titanate-hydroxyapatite scaffolds with interconnected porosity for bone tissue engineering Materials 13 1773

[105] Gaytan S M, Cadena M A, Karim H, Delfin D, Lin Y, Espalin D, MacDonald E and Wicker R B 2015 Fabrication of barium titanate by binder jetting additive manufacturing technology Ceram. Int. 41 6610–9

[106] Mariani M, Beltrami R, Migliori E, Cangini L, Mercadelli E, Baldisserri C, Galassi C and Lecis N 2022 Additive manufacturing of lead-free KNN by binder jetting J. Eur. Ceram. Soc. 42 5598–605

[107] Clares A P, Gao Y W, Stebbins R, Van Duin A C T and Manogharan G 2022 Increasing density and mechanical performance of binder jetting processing through bimodal particle size distribution Mater. Sci. Addit. Manuf. 1 20

[108] Pfeiffer S, Florio K, Puccio D, Grasso M, Colosimo B M, Aneziris C G, Wegener K and Graule T 2021 Direct laser additive manufacturing of high performance oxide ceramics: a state-of-the-art review J. Eur. Ceram. Soc. 41 6087–114

[109] Sing S L and Yeong W Y 2020 Laser powder bed fusion for metal additive manufacturing: perspectives on recent developments Virtual Phys. Prototyp. 15 359–70

[110] ChenAN,LiM,XuJ,LouCH,Wu JM,ChengLJ,ShiYS and Li C H 2018 High-porosity mullite ceramic foams prepared by selective laser sintering using fly ash hollow spheres as raw materials J. Eur. Ceram. Soc. 38 4553–9

[111] Liverani E, Toschi S, Ceschini L and Fortunato A 2017 Effect of selective laser melting (SLM) process parameters on microstructure and mechanical properties of 316L austenitic stainless steel J. Mater. Process. Technol. 249 255–63

[112] Nandy J, Sarangi H and Sahoo S 2019 A review on direct metal laser sintering: process features and microstructure modeling Lasers Manuf. Mater. Process. 6 280–316

[113] Galati M and Iuliano L 2018 A literature review of powder-based electron beam melting focusing on numerical simulations Addit. Manuf. 19 1–20

[114] YangJ,Wan HL,ZhangZH,LiuGZ,XuXX,HuYSand Yao X Y 2018 NASICON-structured Na3.1Zr1.95 Mg0.05Si2PO12 solid electrolyte for solid-state sodium batteries Rare Met. 37 480–7

[115] Dong Y, Jiang H Y, Chen A N, Yang T, Gao S and Liu S N 2021 Near-zero-shrinkage Al2O3 ceramic foams with coral-like and hollow-sphere structures via selective laser sintering and reaction bonding J. Eur. Ceram. Soc. 41 239–46

[116] ChenAN,LuL,ChengLJ,Wu JM,LiuRZ,ChenS, Chen Y, Wen S F, Li C H and Shi Y S 2019 TEM analysis and mechanical strengthening mechanism of MnO2 sintering aid in selective laser sintered porous mullites J. Alloys Compd. 809 151809

[117] Schmid M, Amado A and Wegener K 2015 Polymer powders for selective laser sintering (SLS) AIP Conf. Proc. 1664 160009

[118] ChenAN,GaoF, LiM,Wu JM,ChengLJ,LiuRZ, Chen Y, Wen S F, Li C H and Shi Y S 2019 Mullite ceramic foams with controlled pore structures and low thermal conductivity prepared by SLS using core-shell structured polyamide12/FAHSs composites Ceram. Int. 45 15538–46

[119] Li M, Chen A N, Lin X, Wu J M, Chen S, Cheng L J, Chen Y, Wen S F, Li C H and Shi Y S 2019 Lightweight mullite ceramics with controlled porosity and enhanced properties prepared by SLS using mechanical mixed FAHSs/polyamide12 composites Ceram. Int. 45 20803–9

[120] ChenAN,LiM,Wu JM,ChengLJ,LiuRZ,ShiYSand Li C H 2019 Enhancement mechanism of mechanical performance of highly porous mullite ceramics with bimodal pore structures prepared by selective laser sintering J. Alloys Compd. 776 486–94

[121] ChenAN,ChenJY, Wu JM,ChengLJ,LiuRZ,LiuJ, Chen Y, Li C H, Wen S F and Shi Y S 2019 Porous mullite ceramics with enhanced mechanical properties prepared by SLS using MnO2 and phenolic resin coated double-shell powders Ceram. Int. 45 21136–43

[122] ShuaiCJ,LiuGF, YangYW, YangWJ,HeCX,WangGY, Liu Z, Qi F W and Peng S P 2020 Functionalized BaTiO3 enhances piezoelectric effect towards cell response of bone scaffold Colloids Surf. B 185 110587

[123] YangYW, PengSP, QiFW, ZanJ,LiuGF, ZhaoZYand Shuai C J 2020 Graphene-assisted barium titanate improves piezoelectric performance of biopolymer scaffold Mater. Sci. Eng. C 116 111195

[124] Qi F W, Chen N and Wang Q 2017 Preparation of PA11/BaTiO3 nanocomposite powders with improved processability, dielectric and piezoelectric properties for use in selective laser sintering Mater. Des. 131 135–43

[125] ZhangF, ZhuLY, LiZA,WangSY, ShiJP, TangWL, Li N and Yang J Q 2021 The recent development of vat photopolymerization: a review Addit. Manuf. 48 102423

[126] Shaukat U, Rossegger E and Schl.gl S 2022 A review of multi-material 3D printing of functional materials via vat photopolymerization Polymers 14 2449

[127] Gibson I, Rosen D, Stucker B and Khorasani M 2021 Additive Manufacturing Technologies (Cham: Springer) pp 77–124

[128] Fournier S, Chevalier J, Baeza G P, Chaput C, Louradour E, Sainsot P, Cavoret J and Reveron H 2023 Ceria-stabilized zirconia-based composites printed by stereolithography: impact of the processing method on the ductile behaviour and its transformation features J. Eur. Ceram. Soc. 43 2894–906

[129] Su J et al 2022 Three-dimensional printing of gyroid-structured composite bioceramic scaffolds with tuneable degradability Biomater. Adv. 133 112595

[130] Kelly B E, Bhattacharya I, Heidari H, Shusteff M, Spadaccini C M and Taylor H K 2019 Volumetric additive manufacturing via tomographic reconstruction Science 363 1075–9

[131] Ge Q, Li Z Q, Wang Z L, Kowsari K, Zhang W, He X N, Zhou J L and Fang N X 2020 Projection micro stereolithography based 3D printing and its applications Int. J. Extreme Manuf. 2 022004

[132] Nguyen A K and Narayan R J 2017 Two-photon polymerization for biological applications Mater. Today 20 314–22

[133] Nohut S and Schwentenwein M 2022 Vat photopolymerization additive manufacturing of functionally graded materials: a review J. Manuf. Mater. Process. 6 17

[134] ZhaoWY, WangZY, ZhangJP, WangXP, XuYT, DingN and Peng Z C 2021 Vat photopolymerization 3D printing of advanced soft sensors and actuators: from architecture to function Adv. Mater. Technol. 6 2001218

[135] Cui H C, Hensleigh R, Yao D S, Maurya D, Kumar P, Kang M G, Priya S and Zheng X Y 2019 Three-dimensional printing of piezoelectric materials with designed anisotropy and directional response Nat. Mater. 18 234–41

[136] Cui H et al 2022 Design and printing of proprioceptive three-dimensional architected robotic metamaterials Science 376 1287–93

[137] Jiang Z J, Cheng L Y, Zeng Y, Zhang Z J, Zhao Y T, Dong P and Chen J M 2022 3D printing of porous scaffolds BaTiO3 piezoelectric ceramics and regulation of their mechanical and electrical properties Ceram. Int. 48 6477–87

[138] Marino A, Barsotti J, de Vito G, Filippeschi C, Mazzolai B, Piazza V, Labardi M, Mattoli V and Ciofani G 2015 Two-photon lithography of 3D nanocomposite piezoelectric scaffolds for cell stimulation ACS Appl. Mater. Interfaces 7 25574–9

[139] MacDonald E and Wicker R 2016 Multiprocess 3D printing for increasing component functionality Science 353 aaf2093

[140] Zhao C, Ren L Q, Song Z Y, Deng L H and Liu Q P 2019 Structure-driven biomimetic self-morphing composites fabricated by multi-process 3D printing Composites A 123 1–9

[141] Wang D et al 2022 Recent progress on additive manufacturing of multi-material structures with laser powder bed fusion Virtual Phys. Prototyp. 17 329–65

[142] An J and Leong K F 2022 Multi-material and multi-dimensional 3D printing for biomedical materials and devices Biomed. Mater. Dev. (https://doi.org/10.1007/s44174-022-00038-9)

[143] Lai J H, Wang C, Liu J, Chen S S, Liu C Y, Huang X X, Wu J, Pan Y, Xie Y C and Wang M 2022 Low temperature hybrid 3D printing of hierarchically porous bone tissue engineering scaffolds with in situ delivery of osteogenic peptide and mesenchymal stem cells Biofabrication 14 045006

[144] Englert L, Heuer A, Engelskirchen M K, Fr.lich F, Dietrich S, Liebig W V, K.rger L and Schulze V 2022 Hybrid material additive manufacturing: interlocking interfaces for fused filament fabrication on laser powder bed fusion substrates Virtual Phys. Prototyp. 17 508–27

[145] Niu X L, Li N, Du Z P and Li X M 2023 Integrated gradient tissue-engineered osteochondral scaffolds: challenges, current efforts and future perspectives Bioact. Mater. 20 574–97

[146] Liu F Y, Quan R X, Vyas C and Aslan E 2023 Hybrid biomanufacturing systems applied in tissue regeneration Int. Bioprinting 9 646

[147] Shim J H, Lee J S, Kim J Y and Cho D W 2012 Bioprinting of a mechanically enhanced three-dimensional dual cell-laden construct for osteochondral tissue engineering using a multi-head tissue/organ building system J. Micromech. Microeng. 22 085014

[148] Khani N, Nadernezhad A, Bartolo P and Koc B 2017 Hierarchical and spatial modeling and bio-additive manufacturing of multi-material constructs CIRP Ann. 66 229–32

[149] Zhuang P, Ng W L, An J, Chua C K and Tan L P 2019 Layer-by-layer ultraviolet assisted extrusion-based (UAE) bioprinting of hydrogel constructs with high aspect ratio for soft tissue engineering applications PLoS One 14 e0216776

[150] Xu T, Binder K W, Albanna M Z, Dice D, Zhao W X, Yoo J J and Atala A 2013 Hybrid printing of mechanically and biologically improved constructs for cartilage tissue engineering applications Biofabrication 5 015001

[151] Tibbits S 2013 The emergence of “4D printing” (available at: www.ted.com/talks/skylar_tibbits_the_emergence_of_4d_printing)

[152] Ge Q, Qi H J and Dunn M L 2013 Active materials by four-dimension printing Appl. Phys. Lett. 103 131901

[153] Tibbits S 2014 4D printing: multi-material shape change Archit. Des. 84 116–21

[154] Rafiee M, Farahani R D and Therriault D 2020 Multi-material 3D and 4D printing: a survey Adv. Sci. 7 1902307

[155] Bodaghi M, Noroozi R, Zolfagharian A, Fotouhi M and Norouzi S 2019 4D printing self-morphing structures Materials 12 1353

[156] Yang C, Boorugu M, Dopp A, Ren J, Martin R, Han D, Choi W and Lee H 2019 4D printing reconfigurable, deployable and mechanically tunable metamaterials Mater. Horiz. 6 1244–50

[157] Chen D B et al 2020 4D printing strain self-sensing and temperature self-sensing integrated sensor–actuator with bioinspired gradient gaps Adv. Sci. 7 2000584

[158] Pugliese R and Regondi S 2022 Artificial intelligence-empowered 3D and 4D printing technologies toward smarter biomedical materials and approaches Polymers 14 2794

[159] Hann S Y, Cui H T, Nowicki M and Zhang L G 2020 4D printing soft robotics for biomedical applications Addit. Manuf. 36 101567

[160] You D et al 2021 4D printing of multi-responsive membrane for accelerated in vivo bone healing via remote regulation of stem cell fate Adv. Funct. Mater. 31 2103920

[161] Miao S D, Zhu W, Castro N J, Nowicki M, Zhou X, Cui H T, Fisher J P and Zhang L G 2016 4D printing smart biomedical scaffolds with novel soybean oil epoxidized acrylate Sci. Rep. 6 27226

[162] Camarero-Espinosa S and Moroni L 2021 Janus 3D printed dynamic scaffolds for nanovibration-driven bone regeneration Nat. Commun. 12 1031

[163] Weems A C, Arno M C, Yu W, Huckstepp R T R and Dove A P 2021 4D polycarbonates via stereolithography as scaffolds for soft tissue repair Nat. Commun. 12 3771

[164] Chen A N, Wu J M, Xiao H, Chen J Y, Zhang X Y, Chen F, Ma Y X, Li C H,WeiQ S and ShiYS 2017Rapidand uniform in-situ solidification of alumina suspension via a non-contamination DCC-HVCI method using MgO sintering additive as coagulating agent Ceram. Int. 43 9926–33

[165] ChenAN,Wu JM,LiuMY, ChengLJ,ChenJY, XiaoH, Zhang X Y, Li C H and Shi YS 2017 Rapid in-situ solidification of SiO2 suspension by direct coagulation casting via controlled release of high valence counter ions from calcium iodate and pH shift Ceram. Int. 43 1930–6

[166] Liu G, Zhao Y, Wu G and Lu J 2018 Origami and 4D printing of elastomer-derived ceramic structures Sci. Adv. 4 eaat0641

[167] Kuang X, Roach D J, Wu J T, Hamel C M, Ding Z, Wang T J, Dunn M L and Qi H J 2019 Advances in 4D printing: materials and applications Adv. Funct. Mater. 29 1805290

[168] Liu K et al 2021 4D printing of lead zirconate titanate piezoelectric composites transducer based on direct ink writing Front. Mater. 8 659441

[169] Grinberg D, Siddique S, Le M Q, Liang R, Capsal J F and Cottinet P J 2019 4D printing based piezoelectric composite for medical applications J. Polym. Sci. B 57 109–15

[170] XuQQ,GaoXY, ZhaoSF, LiuYN,ZhangD,ZhouKC, Khanbareh H, Chen W S, Zhang Y and Bowen C 2021 Construction of bio-piezoelectric platforms: from structures and synthesis to applications Adv. Mater. 33 2008452

[171] Peng X R, Kuang X, Roach D J, Wang Y Q, Hamel C M, Lu C L and Qi H J 2021 Integrating digital light processing with direct ink writing for hybrid 3D printing of functional structures and devices Addit. Manuf. 40 101911

[172] Lendlein A, Balk M, Tarazona N A and Gould O E C 2019 Bioperspectives for shape-memory polymers as shape programmable, active materials Biomacromolecules 20 3627–40

[173] Wu H Z, Zhang X, Ma Z, Zhang C, Ai J W, Chen P, Yan C Z, Su B and Shi Y S 2020 A material combination concept to realize 4D printed products with newly emerging property/functionality Adv. Sci. 7 1903208

[174] SSY et al 2022 Additive manufactured self-powered mechanoelectric sensor as the artificial nucleus pulposus for monitoring tissue rehabilitation after discectomy Nano Energy 96 107113

[175] Bao C, Moeinnia H, Kim T H, Lee W and Kim W S 2023 3D structural electronics via multi-directional robot 3D printing Adv. Mater. Technol. 8 2201349

[176] Ajdary R, Reyes G, Kuula J, Raussi-Lehto E, Mikkola T S, Kankuri E and Rojas O J 2022 Direct ink writing of biocompatible nanocellulose and chitosan hydrogels for implant mesh matrices ACS Polym. 2 97–107

[177] Karanth D, Puleo D, Dawson D, Holliday L S and Sharab L 2023 Characterization of 3D printed biodegradable piezoelectric scaffolds for bone regeneration Clin. Exp. Dent. Res. 9 398–408

[178] Wang L Y, Pang Y Y, Tang Y J, Wang X Y, Zhang D X, Zhang X, Yu Y J, Yang X P and Cai Q 2022 A biomimetic piezoelectric scaffold with sustained Mg2+ release promotes neurogenic and angiogenic differentiation for enhanced bone regeneration Bioact. Mater. 25 399–414

[179] Gorodzha S N et al 2017 A comparison study between electrospun polycaprolactone and piezoelectric poly(3-hydroxybutyrate-co-3-hydroxyvalerate) scaffolds for bone tissue engineering Colloids Surf. B 160 48–59

[180] Hwangbo H, Lee J and Kim G 2022 Mechanically and biologically enhanced 3D-printed HA/PLLA/dECM biocomposites for bone tissue engineering Int. J. Biol. Macromol. 218 9–21

[181] Liu Y et al 2022 Exercise-induced piezoelectric stimulation for cartilage regeneration in rabbits Sci. Transl. Med. 14 eabi7282

[182] Chen P, Xu C, Wu P, Liu K, Chen F X, Chen Y, Dai H L and Luo Z Q 2022 Wirelessly powered electrical-stimulation based on biodegradable 3D piezoelectric scaffolds promotes the spinal cord injury repair ACS Nano 16 16513–28

[183] GeM,XuDL,ChenZX,WeiCY, ZhangYX,YangC, Chen Y, Lin H and Shi J L 2021 Magnetostrictive-piezoelectric-triggered nanocatalytic tumor therapy Nano Lett. 21 6764–72

[184] LiaoJF, HanRX,Wu YZandQianZY2021Review ofa new bone tumor therapy strategy based on bifunctional biomaterials Bone Res. 9 18

[185] Lepage S I M et al 2019 Beyond cartilage repair: the role of the osteochondral unit in joint health and disease Tissue Eng. B 25 114–25

[186] ChenAN,Wu JM,ChengLJ,LiuSJ,MaYX,LiH,LiuF, Chen S, Shi Y S and Li C H 2020 Enhanced densification and dielectric properties of CaTiO3-0.3NdAlO3 ceramics fabricated by direct coagulation casting J. Eur. Ceram. Soc. 40 1174–80

[187] Li J, Yang F, Long Y, Dong Y T, Wang Y Z and Wang X D 2021 Bulk ferroelectric metamaterial with enhanced piezoelectric and biomimetic mechanical properties from additive manufacturing ACS Nano 15 14903–14

[188] Goh G D, Sing S L and Yeong W Y 2021 A review on machine learning in 3D printing: applications, potential, and challenges Artif. Intell. Rev. 54 63–94

[189] LiuYX,ChenAN,Wu JM,LiuRZ,ChengLJ,HuoWL, Li C H and Shi Y S 2018 Effect of K2SO4 additions on properties of porous fibrous alumina ceramics prepared by DCC and lost-mold method J. Am. Ceram. Soc. 101 2216–27