[1] Zhang Q, Tang R, Yin K J, et al. Corrosion behavior of Hastelloy C-276 in supercritical water［J］. Corrosion Science, 2009, 51(9): 2092-2097.
[2] Haemers T A M, Richerby D G, Lanza F, et al. Laser cladding of stainless steel with Hastelloy［J］. Advanced Engineering Materials, 2001, 3(4): 242-245.
[3] Inoue A, Zhang T, Takeuchi A, et al. Bulk amorphous alloys with high mechanical strength and good soft magnetic properties in Fe-TM-B (TM=IV-VIII group transition metal) system［J］. Applied Physics Letters, 1997, 71(4): 464-466.
[4] Inoue A, Shen B L, Yavari A R, et al. Mechanical properties of Fe-based bulk glassy alloys in Fe-B-Si-Nb and Fe-Ga-P-C-B-Si systems［J］. Journal of Materials Research, 2003, 18(6): 1487-1492.
[5] Koshiba H, Inoue A, Makino A. Nanocrystallization and magnetic properties of Fe56Co7Ni7Zr2M8B20 (M=Nb or Ta) glassy alloys［J］. Nanostructured Materials, 1997, 8(8): 997-1005.
[6] Pang S J, Zhang T, Asami K, et al. Synthesis of Fe-Cr-Mo-C-B-P bulk metallic glasses with high corrosion resistance［J］. Acta Materialia, 2002, 50(3): 489-497.
[7] Pang S J, Zhang T, Asami K, et al. Bulk glassy Fe-Cr-Mo-C-B alloys with high corrosion resistance［J］. Corrosion Science, 2002, 44(8): 1847-1856.
[8] Wang Y, Zheng Y G, Ke W, et al. Slurry erosion-corrosion behaviour of high-velocity oxy-fuel (HVOF) sprayed Fe-based amorphous metallic coatings for marine pump in sand-containing NaCl solutions［J］. Corrosion Science, 2011, 53(10): 3177-3185.
[9] Liu X Q, Zheng Y G, Chang X C, et al. Microstructure and properties of Fe-based amorphous metallic coating produced by high velocity axial plasma spraying［J］. Journal of Alloys and Compounds, 2009, 484(1-2): 300-307.
[10] Balla V K, Bandyopadhypay A. Laser processing of Fe-based bulk amorphous alloy［J］. Surface & Coatings Technology, 2010, 205(7): 2661-2667.
[11] Wang Yanfang, Xiao Lijun, Liu Mingxing, et al. Research progress of laser cladding amorphous coatings［J］. Laser & Optoelectronics Progress, 2014, 51(7): 070002.
[12] Wang Y F, Lu Q L, Xiao L J, et al. Laser cladding Fe-Cr-Si-P amorphous coatings on 304L stainless［J］. Rare Metal Materials & Engineering, 2014, 43(2): 274-277.
[13] Wang Yanfang, Li Li, Lu Qinglong, et al. Laser cladding Fe-based amorphous coatings on stainless substrate［J］. Chinese J Lasers, 2011, 38(6): 0603017.
[14] Zhang P L, Yan H, Xu P Q, et al. Microstructure and tribological behavior of amorphous and crystalline composite coatings using laser melting［J］. Applied Surface Science, 2012, 258(18): 6902-6908.
[15] Zhang P, Yan H, Yao C W, et al. Synthesis of Fe-Ni-B-Si-Nb amorphous and crystalline composite coatings by laser cladding and remelting［J］. Surface & Coatings Technology, 2011, 206(6): 1229-1236.
[16] Zhang Luan, Dong Chuang, Wang Cunshan, et al. Laser cladding of Fe-B-Si iron base amorphous composite materials on 45 steel surface［J］. Transactions of Materials and Heat Treatment, 2012, 33(10): 116-123.
[17] Li Juan, Wang Shanlin, Gong Yubing. Processing optimization and microstructure of FeSiB amorphous coating by laser cladding［J］. Chinese J Lasers, 2016, 43(1): 0103006.
[18] Lu Qinglong, Wang Yanfang, Li Li, et al. Effects of scanning speed on microstructure and properties of laser cladding Fe-based amorphous composite coatings［J］. Chinese J Lasers, 2013, 40(2): 0203007.
[19] Gargarella P, Almeida A, Vilar R, et al. Formation of Fe-based glassy matrix composite coatings by laser processing［J］. Surface and Coatings Technology, 2013, 240: 336-343.
[20] Wang Bin, Zhou Cui, Zhu Jiaxiang, et al. Microstructure and properties of amorphous and nano crystalline coatings prepared by arc surface welding［J］. Journal of Functional Materials, 2014, 45(19): 19070-19074.
[21] Qian M, Li D, Liu S B, et al. Corrosion performance of laser-remelted Al-Si coating on magnesium alloy AZ91D［J］. Corrosion Science, 2010, 52(10): 3554-3560.
