[1] Mouritz A P, Gellert E, Burchill P and Challis K 2001 Review of advanced composite structures for naval ships and submarines Compos. Struct. 53 21-42

[2] Tang C Q, Tian G Y, Li K J, Sutthaweekul R and Wu J B 2017 Smart compressed sensing for online evaluation of CFRP structure integrity IEEE Trans. Ind. Electron. 64 9608-17

[3] Ravishankar S R and Murthy C R L 2000 Characteristics of AE signals obtained during drilling composite laminates NDT & E Int. 33 341-8

[4] Meola C and Carlomagno G M 2010 Impact damage in GFRP: new insights with infrared thermography Composites A 41 1839-47

[5] Satasivam S, Bai Y and Zhao X L 2014 Adhesively bonded modular GFRP web-flange sandwich for building floor construction Compos. Struct. 111 381-92

[6] Dawood M, Taylor E, Ballew W and Rizkalla S 2010 Static and fatigue bending behavior of pultruded GFRP sandwich panels with through-thickness fiber insertions Composites B 41 363-74

[7] Carvelli V, Panzeri N and Poggi C 2001 Buckling strength of GFRP under-water vehicles Composites B 32 89-101

[8] Scarponi C and Briotti G 2000 Ultrasonic technique for the evaluation of delaminations on CFRP, GFRP, KFRP composite materials Composites B 31 237-43

[9] Kerbrat E, Prada C, Cassereau D and Fink M 2002 Ultrasonic nondestructive testing of scattering media using the decomposition of the time-reversal operator IEEE Trans. Ultrason. Ferroelectr. Freq. Control 49 1103-13

[10] Kazantsev I G, Lemahieu I, Salov G I and Denys R 2002 Statistical detection of defects in radiographic images in nondestructive testing Signal Proc. 85 791-801

[11] Koyama K, Hoshikawa H and Kojima G 2013 Eddy current nondestructive testing for carbon fiber-reinforced composites J. Press. Vessel Technol. 135 041501

[12] Shi Y, Zhang C, Li R, Cai M L and Jia G W 2015 Theory and application of magnetic flux leakage pipeline detection Sensors 15 31036-55

[13] Popow V and Gurka M 2020 Full factorial analysis of the accuracy of automated quantification of hidden defects in an anisotropic carbon fibre reinforced composite shell using pulse phase thermography NDT & E Int. 116 102359

[14] Wang F, Liu J Y, Liu Y and Wang Y 2016 Research on the fiber lay-up orientation detection of unidirectional CFRP laminates composite using thermal-wave radar imaging NDT & E Int. 84 54-66

[15] Song P, Xiao P, Liu J Y and Wang Y H 2019 The inspection of coating thickness uniformity of SiC-coated carbon-carbon (C/C) composites by laser-induced thermal-wave imaging Carbon 147 348-56

[16] Liu L S, Guo C J, Xiang Y X, Tu Y X, Wang L M and Xuan F Z 2022 A semisupervised learning framework for recognition and classification of defects in transient thermography detection IEEE Trans. Ind. Inform. 18 2632-40

[17] Gomathi R, Ashok M, Menaka M and Venkatraman B 2021 Quantification of wall loss defect in glass fiber reinforced polymer curved composites using lock-in thermography J. Nondestruct. Eval. 40 42

[18] Montanini R and Freni F 2012 Non-destructive evaluation of thick glass fiber-reinforced composites by means of optically excited lock-in thermography Composites A 43 2075-82

[19] Müller J P and Krankenhagen R 2019 Optimizing thermographic testing of thick GFRP plates by assessing the real energy absorbed within the material Compos. Struct. 215 60-68

[20] Liu L S, Mei H W, Guo C J, Tu Y X, Wang L M and Liu J B 2020 Remote optical thermography detection method and system for silicone polymer insulating materials used in power industry IEEE Trans. Instrum. Meas. 69 5782-90

[21] Palumbo D, Cavallo P and Galietti U 2019 An investigation of the stepped thermography technique for defects evaluation in GFRP materials NDT & E Int. 102 254-63

[22] Carlomagno G M and Meola C 2002 Comparison between thermographic techniques for frescoes NDT NDT & E Int. 35 559-65

[23] Ibarra-Castanedo C, Piau J M, Guilbert S, Avdelidis N P, Genest M, Bendada A and Maldague X P V 2009 Comparative study of active thermography techniques for the nondestructive evaluation of honeycomb structures Res. Nondestruct. Eval. 20 1-31

[24] Busse G, Wu D and Karpen W 1992 Thermal wave imaging with phase sensitive modulated thermography Appl. Phys. Lett. 71 3962

[25] Wu D T and Busse G 1998 Lock-in thermography for nondestructive evaluation of materials Rev. Gén. Therm. 37 693-703

[26] Tabatabaei N and Mandelis A 2009 Thermal-wave radar: a novel subsurface imaging modality with extended depth-resolution dynamic range Rev. Sci. Instrum. 80 034902

[27] Tabatabaei N, Mandelis A and Amaechi B T 2011 Thermophotonic radar imaging: an emissivity-normalized modality with advantages over phase lock-in thermography Appl. Phys. Lett. 98 163706

[28] Melnikov A, Sivagurunathan K, Guo X, Tolev J, Mandelis A, Ly K and Lawcock R 2017 Non-destructive thermalwave-radar imaging of manufactured green powder metallurgy compact flaws (cracks) NDT & E Int. 86 140-52

[29] Wang F, Liu J Y, Dong B Y, Liu G B, Chen M J and Wang Y 2021 Optimization of thermal-wave radar thermography by transverse heat flow suppression technique for accurate defect detection of CFRP laminates IEEE Trans. Instrum. Meas. 70 4505710

[30] Melnikov A, Chen L J, Venegas D R, Sivagurunathan K, Sun Q M, Mandelis A and Rodriguez I R 2018 Single frequency thermal wave radar: a next-generation dynamic thermography for quantitative non-destructive imaging over wide modulation frequency ranges Rev. Sci. Instrum. 89 044901

[31] Turin G 1960 An introduction to matched filters IRE Trans. Inf. Theory 6 311-29

[32] Mandelis A 2001 Diffusion-Wave Fields: Mathematical Methods and Green Functions (New York: Springer)

[33] Thomas R L, Favro L D, Grice K R, Inglehard L J, Kuo P K and Lhota J 1982 Proc. 1982 Ultrasonics Symp. vol 586 (New York: IEEE) (https://10.1109/ULTSYM.1982.197895)