[1] Xing F, Li S, Yin D D, Xie J C, Rommens P M, Xiang Z, Liu M and Ritz U 2022 Recent progress in Mg-based alloys as a novel bioabsorbable biomaterials for orthopedic applications J. Magnes. Alloys 10 1428–56

[2] Wang J L, Xu J K, Hopkins C, Chow D H K and Qin L 2020 Biodegradable magnesium-based implants in orthopedics—a general review and perspectives Adv. Sci. 7 1902443

[3] Yan W, Lian Y J, Zhang Z Y, Zeng M Q, Zhang Z Q, Yin Z Z, Cui L Y and Zeng R C 2020 In vitro degradation of pure magnesium—the synergetic influences of glucose and albumin Bioact. Mater. 5 318–33

[4] Li Y X et al 2019 Surface engineering of biodegradable magnesium alloys for enhanced orthopedic implants Small 15 1904486

[5] B?r F, Berger L, Jauer L, Kurtuldu G, Sch?ublin R, Schleifenbaum J H and L?ffler J F 2019 Laser additive manufacturing of biodegradable magnesium alloy WE43: a detailed microstructure analysis Acta Biomater. 98 36–49

[6] Luo Q, Guo Y L, Liu B, Feng Y J, Zhang J Y, Li Q and Chou K 2020 Thermodynamics and kinetics of phase transformation in rare earth–magnesium alloys: a critical review J. Mater. Sci. Technol. 44 171–90

[7] Hidalgo-Manrique P, Robson J D and Pérez-Prado M T 2017 Precipitation strengthening and reversed yield stress asymmetry in Mg alloys containing rare-earth elements: a quantitative study Acta Mater. 124 456–67

[8] Zhang C, Wu L, Liu H, Huang G S, Jiang B, Atrens A and Pan F S 2020 Microstructure and corrosion behavior of Mg-Sc binary alloys in 3.5 wt.% NaCl solution Corros. Sci. 174 108831

[9] Willbold E et al 2015 Effect of the addition of low rare earth elements (lanthanum, neodymium, cerium) on the biodegradation and biocompatibility of magnesium Acta Biomater. 11 554–62

[10] Weng W J, Biesiekierski A, Li Y C, Dargusch M and Wen C E 2021 A review of the physiological impact of rare earth elements and their uses in biomedical Mg alloys Acta Biomater. 130 80–97

[11] Wu Z X, Ahmad R, Yin B L, Sandl?bes S and Curtin W A 2018 Mechanistic origin and prediction of enhanced ductility in magnesium alloys Science 359 447–52

[12] Li K, Ji C, Bai S W, Jiang B and Pan F S 2023 Selective laser melting of magnesium alloys: necessity, formability, performance, optimization and applications J. Mater. Sci. Technol. 154 65–93

[13] Deng Q C, Wu Y J, Wu Q Y, Xue Y T, Zhang Y, Peng L M and Ding W J 2022 Microstructure evolution and mechanical properties of a high-strength Mg-10Gd-3Y–1Zn-0.4Zr alloy fabricated by laser powder bed fusion Addit. Manuf. 49 102517

[14] Chen W, Gu D D, Yang J K, Yang Q, Chen J and Shen X F 2022 Compressive mechanical properties and shape memory effect of NiTi gradient lattice structures fabricated by laser powder bed fusion Int. J. Extrem. Manuf. 4 045002

[15] Zhao D L, Han C J, Peng B, Cheng T, Fan J X, Yang L, Chen L L and Wei Q S 2022 Corrosion fatigue behavior and anti-fatigue mechanisms of an additively manufactured biodegradable zinc-magnesium gyroid scaffold Acta Biomater. 153 614–29

[16] Davoodi E et al 2022 Additively manufactured metallic biomaterials Bioact. Mater. 15 214–49

[17] Tan C L, Deng C, Li S, Abena A, Jamshidi P, Essa K, Wu L K, Xu G H, Attallah M M and Liu J 2022 Mechanical property and biological behaviour of additive manufactured TiNi functionally graded lattice structure Int. J. Extrem. Manuf. 4 045003

[18] Yang J K, Gu D D, Lin K J, Zhang Y C, Guo M, Yuan L H, Zhang H and Zhang H M 2022 Laser additive manufacturing of bio-inspired metallic structures Chin. J. Mech. Eng. 1 100013

[19] Shuai C J, Li D S, Yao X, Li X and Gao C D 2023 Additive manufacturing of promising heterostructure for biomedical applications Int. J. Extrem. Manuf. 5 032012

[20] Zhao D L, Liang H, Han C J, Li J J, Liu J, Zhou K, Yang C and Wei Q S 2021 3D printing of a titanium-tantalum Gyroid scaffold with superb elastic admissible strain, bioactivity and in-situ bone regeneration capability Addit. Manuf. 47 102223

[21] Tino R, Leary M, Yeo A, Kyriakou E, Kron T and Brandt M 2020 Additive manufacturing in radiation oncology: a review of clinical practice, emerging trends and research opportunities Int. J. Extrem. Manuf. 2 012003

[22] Hyer H, Zhou L, Benson G, Mcwilliams B, Cho K and Sohn Y 2020 Additive manufacturing of dense WE43 Mg alloy by laser powder bed fusion Addit. Manuf. 33 101123

[23] Esmaily M et al 2020 A detailed microstructural and corrosion analysis of magnesium alloy WE43 manufactured by selective laser melting Addit. Manuf. 35 101321

[24] Laleh M et al 2023 Heat treatment for metal additive manufacturing Progress Mater. Sci. 133 101051

[25] Chen Y, Zhang J X, Gu X H, Dai N W, Qin P and Zhang L C 2018 Distinction of corrosion resistance of selective laser melted Al-12Si alloy on different planes J. Alloys Compd. 747 648–58

[26] Sentyurina Z A, Baskov F A, Loginov P A, Kaplanskii Y Y, Mishukov A V, Logachev I A, Bychkova M Y, Levashov E A and Logacheva A I 2021 The effect of hot isostatic pressing and heat treatment on the microstructure and properties of EP741NP nickel alloy manufactured by laser powder bed fusion Addit. Manuf. 37 101629

[27] Cabrini M, Carrozza A, Lorenzi S, Pastore T, Testa C, Manfredi D, Fino P and Scenini F 2022 Influence of surface finishing and heat treatments on the corrosion resistance of LPBF-produced Ti-6Al-4V alloy for biomedical applications J. Mater. Process. Technol. 308 117730

[28] Jiang R B, Mostafaei A, Pauza J, Kantzos C and Rollett A D 2019 Varied heat treatments and properties of laser powder bed printed Inconel 718 Mater. Sci. Eng. A 755 170–80

[29] Li K, Ma R J, Zhang M, Chen W, Li X B, Zhang D Z, Tang Q, Murr L E, Li J F and Cao H J 2022 Hybrid post-processing effects of magnetic abrasive finishing and heat treatment on surface integrity and mechanical properties of additively manufactured Inconel 718 superalloys J. Mater. Sci. Technol. 128 10–21

[30] Qi Y, Zhang H, Zhu J J, Nie X J, Hu Z H, Zhu H H and Zeng X Y 2020 Mechanical behavior and microstructure evolution of Al-Cu-Mg alloy produced by laser powder bed fusion: effect of heat treatment Mater. Charact. 165 110364

[31] Kong D C, Dong C F, Ni X Q, Zhang L, Yao J Z, Man C, Cheng X Q, Xiao K and Li X G 2019 Mechanical properties and corrosion behavior of selective laser melted 316L stainless steel after different heat treatment processes J. Mater. Sci. Technol. 35 1499–507

[32] Sun W T, Wu B, Fu H, Yang X S, Qiao X G, Zheng M Y, He Y, Lu J and Shi S Q 2022 Combining gradient structure and supersaturated solid solution to achieve superior mechanical properties in WE43 magnesium alloy J. Mater. Sci. Technol. 99 223–38

[33] Yang Y W, Ling C R, Li Y G, Peng S P, Xie D Q, Shen L D, Tian Z J and Shuai C J 2023 Microstructure development and biodegradation behavior of additively manufactured Mg-Zn-Gd alloy with LPSO structure J. Mater. Sci. Technol. 144 1–14

[34] Duan R X, Li S, Cai B, Tao Z, Zhu W W, Ren F Z and Attallah M M 2021 In situ alloying based laser powder bed fusion processing of β Ti–Mo alloy to fabricate functionally graded composites Composites A 222 109059

[35] Raffeis I, Adjei-Kyeremeh F, Vroomen U, Westhoff E, Bremen S, Hohoi A and Bührig-Polaczek A 2020 Qualification of a Ni–Cu alloy for the laser powder bed fusion process (LPBF): its microstructure and mechanical properties Appl. Sci. 10 3401

[36] Roehling T T, Wu S S Q, Khairallah S A, Roehling J D, Soezeri S S, Crumb M F and Matthews M J 2017 Modulating laser intensity profile ellipticity for microstructural control during metal additive manufacturing Acta Mater. 128 197–206

[37] Li J F, Wu Y X, Xue L F and Wei Z Y 2023 Laser powder bed fusion in-situ alloying of refractory WTa alloy and its microstructure and mechanical properties Addit. Manuf. 67 103493

[38] Chen N N, Khan H A, Wan Z X, Lippert J, Sun H, Shang S L, Liu Z K and Li J J 2020 Microstructural characteristics and crack formation in additively manufactured bimetal material of 316L stainless steel and Inconel 625 Addit. Manuf. 32 101037

[39] Shi R P, Khairallah S A, Roehling T T, Heo T W, McKeown J T and Matthews M J 2020 Microstructural control in metal laser powder bed fusion additive manufacturing using laser beam shaping strategy Acta Mater. 184 284–305

[40] Liu X H, Zhao C C, Zhou X, Shen Z J and Liu W 2019 Microstructure of selective laser melted AlSi10Mg alloy Mater. Des. 168 107677

[41] Bermingham M J, Stjohn D H, Krynen J, Tedman-Jones S and Dargusch M S 2019 Promoting the columnar to equiaxed transition and grain refinement of titanium alloys during additive manufacturing Acta Mater. 168 261–74

[42] Roehling T T, Shi R P, Khairallah S A, Roehling J D, Guss G M, McKeown J T and Matthews M J 2020 Controlling grain nucleation and morphology by laser beam shaping in metal additive manufacturing Mater. Des. 195 109071

[43] Que Z Q, Chang L T, Saario T and Bojinov M 2022 Localised electrochemical processes on laser powder bed fused 316 stainless steel with various heat treatments in high-temperature water Addit. Manuf. 60 103205

[44] Davies S J, Jeffs S P, Coleman M P and Lancaster R J 2018 Effects of heat treatment on microstructure and creep properties of a laser powder bed fused nickel superalloy Mater. Des. 159 39–46

[45] Zhang Q, Li Q A, Chen X Y, Zhao J X, Bao J and Chen Z Y 2021 Dynamic precipitation and recrystallization mechanism during hot compression of Mg-Gd-Y-Zr alloy J. Mater. Res. Technol. 15 37–51

[46] Chen Q H, Chen R N, Su J, He Q S, Tan B, Xu C, Huang X, Dai Q W and Lu J 2022 The mechanisms of grain growth of Mg alloys: a review J. Magnes. Alloys 10 2384–97

[47] Zuiko I S, Mironov S, Betsofen S and Kaibyshev R 2021 Suppression of abnormal grain growth in friction-stir welded Al–Cu–Mg alloy by lowering of welding temperature Scr. Mater. 196 113765

[48] Fatemi S M, Aliyari S and Miresmaeili S M 2019 Dynamic precipitation and dynamic recrystallization during hot deformation of a solutionized WE43 magnesium alloy Mater. Sci. Eng. A 762 138076

[49] Robson J D and Paa-Rai C 2015 The interaction of grain refinement and ageing in magnesium–zinc–zirconium (ZK) alloys Acta Mater. 95 10–19

[50] Xu D K, Liu L, Xu Y B and Han E H 2006 The effect of precipitates on the mechanical properties of ZK60-Y alloy Mater. Sci. Eng. A 420 322–32

[51] Mondet M, Barraud E, Lemonnier S, Guyon J, Allain N and Grosdidier T 2016 Microstructure and mechanical properties of AZ91 magnesium alloy developed by Spark Plasma Sintering Acta Mater. 119 55–67

[52] Bhattacharyya J J, Wang F, Stanford N and Agnew S R 2018 Slip mode dependency of dislocation shearing and looping of precipitates in Mg alloy WE43 Acta Mater. 146 55–62

[53] Kang Y H, Wu D, Chen R S and Han E H 2014 Microstructures and mechanical properties of the age hardened Mg–4.2Y–2.5Nd–1Gd–0.6Zr (WE43) microalloyed with Zn J. Magnes. Alloys 2 109–15

[54] Jiang H S, Zheng M Y, Qiao X G, Wu K, Peng Q Y, Yang S H, Yuan Y H and Luo J H 2017 Microstructure and mechanical properties of WE43 magnesium alloy fabricated by direct-chill casting Mater. Sci. Eng. A 684 158–64

[55] Xu L, Liu C M, Wan Y C, Wang X and Xiao H C 2012 Effects of heat treatments on microstructures and mechanical properties of Mg–4Y–2.5Nd–0.7Zr alloy Mater. Sci. Eng. A 558 1–6

[56] Kang Y H, Yan H and Chen R S 2015 Effects of heat treatment on the precipitates and mechanical properties of sand-cast Mg–4Y–2.3Nd–1Gd–0.6Zr magnesium alloy Mater. Sci. Eng. A 645 361–8

[57] Liang J W, Lei Z L, Chen Y B, Fu W J, Wu S B, Chen X and Yang Y C 2022 Microstructure evolution of laser powder bed fusion ZK60 Mg alloy after different heat treatment J. Alloys Compd. 898 163046

[58] Zumdick N A, Jauer L, Kersting L C, Kutz T N, Schleifenbaum J H and Zander D 2019 Additive manufactured WE43 magnesium: a comparative study of the microstructure and mechanical properties with those of powder extruded and as-cast WE43 Mater. Charact. 147 384–97

[59] Deng Q C, Zhang Y, Liu Z Y, Chang Z Y, Su N, Wu Y J, Hao L L, Peng L M and Ding W J 2022 Laser powder bed fusion of an age-hardenable Mg-10Gd-0.2Zr alloy with excellent strength-ductility synergy J. Alloys Compd. 910 164863

[60] Yin B Z, Liu J E, Peng B, Zhou M R, Liu B C, Ma X L, Wang C M, Wen P, Tian Y and Zheng Y F 2022 Influence of layer thickness on formation quality, microstructure, mechanical properties, and corrosion resistance of WE43 magnesium alloy fabricated by laser powder bed fusion J. Magnes. Alloys 3

[61] Liang J W, Lei Z L, Chen Y B, Wu S B, Chen X, Jiang M and Cao S Y 2022 Formability, microstructure, and thermal crack characteristics of selective laser melting of ZK60 magnesium alloy Mater. Sci. Eng. A 839 142858

[62] Zhang Y, Tan L L, Wang Q C, Gao M, Etim I P and Yang K 2020 Effects of microstructure on the torsional properties of biodegradable WE43 Mg alloy J. Mater. Sci. Technol. 51 102–10

[63] Dvorsk′y D, Kubásek J, Roudnická M, Pr?uˇsa F, Necˇas D, Minárik P, Stráská J and Vojteˇch D 2021 The effect of powder size on the mechanical and corrosion properties and the ignition temperature of WE43 alloy prepared by spark plasma sintering J. Magnes. Alloys 9 1349–62

[64] Wu M, Fang W, Chen R M, Jiang B, Wang H B, Liu Y Z and Liang H L 2019 Mechanical anisotropy and local ductility in transverse tensile deformation in hot rolled steels: the role of MnS inclusions Mater. Sci. Eng. A 744 324–34

[65] Feng Y J, Wei L, Chen X B, Li M C, Cheng Y F and Li Q 2019 Unexpected cathodic role of Mg41Sm5 phase in mitigating localized corrosion of extruded Mg-Sm-Zn-Zr alloy in NaCl solution Corros. Sci. 159 108133

[66] Qin P, Chen L Y, Zhao C H, Liu Y J, Cao C D, Sun H and Zhang L C 2021 Corrosion behavior and mechanism of selective laser melted Ti35Nb alloy produced using pre-alloyed and mixed powder in Hank’s solution Corros. Sci. 189 109609

[67] Cui Y W, Chen L Y, Qin P, Li R F, Zang Q H, Peng J H, Zhang L N, Lu S, Wang L Q and Zhang L C 2022 Metastable pitting corrosion behavior of laser powder bed fusion produced Ti-6Al-4V in Hank’s solution Corros. Sci. 203 110333

[68] Feng J W, Zhang H, Zhang L, Zou G D, Wang J and Peng Q M 2022 Microstructure and corrosion properties for ultrahigh-pressure Mg-Li alloys Corros. Sci. 206 110519

[69] Zhang K, Wang C, Liu S, Guan K, Li M X, Zhang L Y and Wang H Y 2023 New insights on corrosion behavior of aging precipitates in dilute Mg-Al-Ca alloy by experiments and first-principles calculations Corros. Sci. 220 111254