• Piezoelectrics & Acoustooptics
  • Vol. 42, Issue 4, 466 (2020)
REN Yanyu1, WANG Lu2, WANG Yinxin2, and YANG Jing2
Author Affiliations
  • 1[in Chinese]
  • 2[in Chinese]
  • show less
    DOI: 10.11977/j.issn.1004-2474.2020.04.008 Cite this Article
    REN Yanyu, WANG Lu, WANG Yinxin, YANG Jing. Design of a 3-D Nanowire SAW Gas Sensor and Alarm Detector[J]. Piezoelectrics & Acoustooptics, 2020, 42(4): 466 Copy Citation Text show less

    Abstract

    In this paper, a new SAW gas sensor with three-dimensional nanowire structure is presented. The preparation and modification of nanowire on SAW resonator, the design of sensor signal extraction circuit and the design of alarm detector are described in detail. In the end, a gas alarm detector sample is developed, and the performance index of the sensor is tested with GB simulator, the response threshold of the sensor is 2 mg/m3, and the corresponding time is only 20 s. The results show that the three-dimensional nanowire SAW gas sensor has a significant improvement both in response threshold and in corresponding time compared with the conventional two-dimensional SAW gas sensor.
    REN Yanyu, WANG Lu, WANG Yinxin, YANG Jing. Design of a 3-D Nanowire SAW Gas Sensor and Alarm Detector[J]. Piezoelectrics & Acoustooptics, 2020, 42(4): 466
    Download Citation