[2] WANG Y, LI J H, DENG J, et al. Bond behaviour of CFRP/steel strap joints exposed to overloading fatigue and wetting/drying cycles［J］. Engineering Structures, 2018, 172: 1-12.
[4] SZEWCZAK A. Changes in the rheological and adhesive properties of epoxy resin used in the technology of reinforcement of structural elements with CFRP tapes［J］. Materials, 2023, 16(23): 7408.
[6] KOTEKO M, LIS P, MACDONALD M. Load capacity probabilistic sensitivity analysis of thin-walled beams［J］. Thin-Walled Structures, 2017, 115: 142-153.
[11] KUNAL M, RAMAN P S. Effect of APTMS modification on multiwall carbon nanotube reinforced epoxy nanocomposites［J］. Composites Part B, 2019, 162: 425-432.
[12] AL-MOSAWE A, AL-MAHAIDI R, ZHAO X L. Effect of CFRP properties, on the bond characteristics between steel and CFRP laminate under quasi-static loading［J］. Construction and Building Materials, 2015, 98: 489-501.
[14] ZHANG K H， WANG Z J， LUO Y. One-component epoxy resin adhesive featured with high storage stability based on microencapsulation［J］. Colloids and Surfaces A: Physicochemical and Engineering Aspects, 2024, 683: 133045.
[16] SOLEILHET F, QUIERTANT M, BENZARTI K. Numerical modelling of the nonlinear shear creep behavior of FRP-concrete bonded joints［J］. Materials, 2023, 16(2): 801.
[18] KORAYEM H A， LI Y C， ZHANG H Q, et al. Effect of carbon nanotube modified epoxy adhesive on CFRP-to-steel interface［J］. Composites Part B, 2015, 79: 95-104.
[19] OMRANI A, SIMON L C, ROSTAMI A A. The effects of alumina nanoparticle on the properties of an epoxy resin system［J］. Materials Chemistry and Physics, 2009, 114(1): 145-150.
[23] ROSTAMIYAN Y, HAMED MASHHADZADEH A, SALMANKHANI A. Optimization of mechanical properties of epoxy-based hybrid nanocomposite: effect of using nano silica and high-impact polystyrene by mixture design approach［J］. Materials and Design, 2013, 56: 1068-1077.
[24] MIRMOHSENI A, ZAVAREH S. Modeling and optimization of a new impact-toughened epoxy nanocomposite using response surface methodology［J］. Journal of Polymer Research, 2011, 18(4): 509-517.
[26] SUN T, WU Z J, ZHUO Q, et al. Microstructure and mechanical properties of aminated polystyrene spheres/epoxy polymer blends［J］. Composites Part A: Applied Science and Manufacturing, 2014, 66: 58-64.
[27] SHA Y, HUI C Y, KRAMER E J, et al. Fracture toughness and failure mechanisms of epoxy/rubber-modified polystyrene (HIPS) interfaces reinforced by grafted chains［J］. Macromolecules, 1996, 29(13): 4728-4736.
[28] GU H B, MA C, LIANG C B, et al. A low loading of grafted thermoplastic polystyrene strengthens and toughens transparent epoxy composites［J］. Journal of Materials Chemistry C, 2017, 5(17): 4275-4285.
[29] AMARO A, BERNARDO L, PINTO D, et al. The influence of curing agents in the impact properties of epoxy resin nanocomposites［J］. Composite Structures, 2017, 174(8): 26-32.
