[1] European Commission 2019 Communication COM/2019/640: The European Green Deal (Brussels: European Commission)

[2] Pfleging W 2018 A review of laser electrode processing for development and manufacturing of lithium-ion batteries Nanophotonics 7 549–73

[3] Pfleging W and Pr.ll J 2014 A new approach for rapid electrolyte wetting in tape cast electrodes for lithium-ion batteries J. Mater. Chem. A 2 14918–26

[4] Haselrieder W, Westphal B, Bockholt H, Diener A, H.ft S and Kwade A 2015 Measuring the coating adhesion strength of electrodes for lithium-ion batteries Int. J. Adhes. Adhes. 60 1–8

[5] Zheng H H, Zhang L, Liu G, Song X Y and Battaglia V S 2012 Correlationship between electrode mechanics and long-term cycling performance for graphite anode in lithium ion cells J. Power Sources 217 530–7

[6] Chen L B, Xie X H, Xie J Y, Wang K and Yang J 2006 Binder effect on cycling performance of silicon/carbon composite anodes for lithium ion batteries J. Appl. Electrochem. 36 1099–104

[7] Romoli L, Lutey A H A and Lazzini G 2022 Laser texturing of Li-ion battery electrode current collectors for improved active layer interface adhesion CIRP Ann. 71 481–4

[8] Zheng Y, An Z, Smyrek P, Seifert H J, Kunze T, Lang V, Lasagni A F and Pfleging W 2016 Direct laser interference patterning and ultrafast laser-induced micro/nano structuring of current collectors for lithium-ion batteries Proc. SPIE 9736 97361B

[9] ChenJQ,WangXG,GaoHT, Yan S,ChenSD,LiuXHand Hu X L 2021 Rolled electrodeposited copper foil with modified surface morphology as anode current collector for high performance lithium-ion batteries Surf. Coat. Technol. 410 126881

[10] Scholz C, Gebhardt M and Clair M 2021 Roll-to-roll laser processing of flexible devices Lasers in Manufacturing Conf. 2021 (Munich, 21–24 June 2021) vol 14 pp 16–21 (available at: https://wlt.de/sites/default/files/2021-10/ ablation_drilling_cutting/Contribution_244_final.pdf)

[11] Mincuzzi G, Bourtereau A, Sikora A, Faucon M and Kling R 2022 Pushing laser nano-structuring through mass production Proc. SPIE 11989 119890

[12] Lasagni A and Mücklich F 2009 FEM simulation of periodical local heating caused by laser interference metallurgy J. Mater. Process. Technol. 209 202–9

[13] Voisiat B, Gedvilas M, Indrisiˉunas S and Raciukaitis G 2011 Picosecond-laser 4-beam-interference ablation as a flexible tool for thin film microstructuring Phys. Proc. 12 116–24

[14] Hans M, Gachot C, Müller F and Mücklich F 2009 Direct laser interference structuring as a tool to gradually tune the wetting response of titanium and polyimide surfaces Adv. Eng. Mater. 11 795–800

[15] Lang V, Roch T and Lasagni A F 2016 World record in high speed laser surface microstructuring of polymer and steel using direct laser interference patterning Proc. SPIE 9736 97360Z

[16] Milles S, Voisiat B, Nitschke M and Lasagni A F 2019 Influence of roughness achieved by periodic structures on the wettability of aluminum using direct laser writing and direct laser interference patterning technology J. Mater. Process. Technol. 270 142–51

[17] Finger J, Kalupka C and Reininghaus M 2015 High power ultra-short pulse laser ablation of IN718 using high repetition rates J. Mater. Process. Technol. 226 221–7

[18] El-Khoury M, Voisiat B, Kunze T and Lasagni A F 2022 Utilizing a diffractive focus beam shaper to enhance pattern uniformity and process throughput during direct laser interference patterning Materials 15 591

[19] Kunze T, Zwahr C, Krupop B, Alamri S, R..ler F and Lasagni A F 2017 Development of a scanner-based direct laser interference patterning optical head: new surface structuring opportunities Proc. SPIE 10092 1009214

[20] Madelung A, Alamri S, Steege T, Krupop B, Lasagni A F and Kunze T 2021 Scanner-based direct laser interference patterning on stainless steel Adv. Eng. Mater. 23 2001414

[21] Raciukatis G 2011 Laser processing by using diffractive optical laser beam shaping technique J. Laser Micro Nanoeng. 6 37–43

[22] Basler C, Brandenburg A, Michalik K and Mory D 2019 Comparison of laser pulse duration for the spatially resolved measurement of coating thickness with laser-induced breakdown spectroscopy Sensors 19 4133

[23] Wiegelmann M, Dreisewerd K and Soltwisch J 2016 Influence of the laser spot size, focal beam profile, and tissue type on the lipid signals obtained by MALDI-MS imaging in oversampling mode J. Am. Soc. Mass Spectrom. 27 1952–64

[24] Rung S 2013 Laserscribing of thin films using top-hat laser beam profiles J. Laser Micro Nanoeng. 8 309–14

[25] Bischoff C, J.ger E, Umhofer U, Lasagni A F and V.lklein F 2020 Homogeneous intensity within the Rayleigh length and enhanced depth of focus for Gaussian beams J. Laser Micro Nanoeng. 15 178–85

[26] Bischoff C, R.del U, Umhofer U, J.ger E and Lasagni A F 2022 Integration of diffractive optics for top-hat generation and enhanced depth of focus J. Laser Micro Nanoeng. 17 69–80

[27] Veldkamp W B and Kastner C J 1982 Beam profile shaping for laser radars that use detector arrays Appl. Opt. 21 345–56

[28] Veldkamp W B 1982 Laser beam profile shaping with interlaced binary diffraction gratings Appl. Opt. 21 3209–12

[29] Gur I and Mendlovic D 1998 Diffraction limited domain flat-top generator Opt. Commun. 145 237–48

[30] Zhu P H, Seifert H J and Pfleging W 2019 The ultrafast laser ablation of Li(Ni0.6Mn0.2Co0.2)O2 electrodes with high mass loading Appl. Sci. 9 4067

[31] Meyer A, Ball F and Pfleging W 2021 The effect of silicon grade and electrode architecture on the performance of advanced anodes for next generation lithium-ion cells Nanomaterials 11 3448

[32] Zhu P, Han J and Pfleging W 2021 Characterization and laser structuring of aqueous processed Li(Ni0.6Mn0.2Co0.2)O2 thick-film cathodes for lithium-ion batteries Nanomaterials 11 1840

[33] Bieda M, Siebold M and Lasagni A F 2016 Fabrication of sub-micron surface structures on copper, stainless steel and titanium using picosecond laser interference patterning Appl. Surf. Sci. 387 175–82