[1] Lu B H, Lan H B and Liu H Z 2018 Additive manufacturing frontier: 3D printing electronics Opto-Electron. Adv. 1 170004
[2] Huang Y A, Wu H, Xiao L, Duan Y Q, Zhu H, Bian J, Ye D and Yin Z P 2019 Assembly and applications of 3D conformal electronics on curvilinear surfaces Mater. Horiz. 6 642–83
[3] Espalin D, Muse D W, MacDonald E and Wicker R B 2014 3D printing multifunctionality: structures with electronics Int. J. Adv. Manuf. Technol. 72 963–78
[4] Chen K J, Zhang L, Kuang X, Li V, Lei M, Kang G Z, Wang Z L and Qi H J 2019 Dynamic photomask-assisted direct ink writing multimaterial for multilevel triboelectric nanogenerator Adv. Funct. Mater. 29 1903568
[5] PangYK,CaoYT, ChuYH,LiuMH,SnyderK, MacKenzie D and Cao C Y 2020 Additive manufacturing of batteries Adv. Funct. Mater. 30 1906244
[6] Adams J J, Slimmer S C, Lewis J A and Bernhard J T 2015 3D-printed spherical dipole antenna integrated on small RF node Electron. Lett. 51 661–2
[7] Church K H et al 2017 Multimaterial and multilayer direct digital manufacturing of 3D structural microwave electronics Proc. IEEE 105 688–701
[8] Li J, Wang Y, Xiang G Z, Liu H D and He J L 2019 Hybrid additive manufacturing method for selective plating of freeform circuitry on 3D printed plastic structure Adv. Mater. Technol. 4 1800529
[9] Goh G L, Zhang H N, Chong T H and Yeong W Y 2021 3D printing of multilayered and multimaterial electronics Adv. Electron. Mater. 7 2100445
[10] Maalderink H H H, Bruning F B J, De Schipper M M R, van der Werff J J J, GermsW WC, Remmers J J C and Meinders E R 2018 3D printed structural electronics: embedding and connecting electronic components into freeform electronic devices Plast. Rubber Compos. 47 35–41
[11] Goh G L, Dikshit V, Koneru R, Peh Z K, Lu W Y, Goh G D and Yeong W Y 2022 Fabrication of design-optimized multifunctional safety cage with conformal circuits for drone using hybrid 3D printing technology Int. J. Adv. Manuf. Technol. 120 2573–86
[12] WangPR,LiJ,WangGQ,HaiY, HeL,Yu YQ,WangX, Chen M and Xu B 2022 Selectively metalizable low-temperature cofired ceramic for three-dimensional electronics via hybrid additive manufacturing ACS Appl. Mater. Interfaces 14 28060–73
[13] Ahn B Y, Walker S B, Slimmer S C, Russo A, Gupta A, Kranz S, Duoss E B, Malkowski T F and Lewis J A 2011 Planar and three-dimensional printing of conductive inks J. Vis. Exp. 58 3189
[14] Khondoker M A H, Ostashek A and Sameoto D 2019 Direct 3D printing of stretchable circuits via liquid metal co-extrusion within thermoplastic filaments Adv. Eng. Mater. 21 1900060
[15] Hon K K B, Li L and Hutchings I M 2008 Direct writing technology—advances and developments CIRP Ann. 57 601–20
[16] Tehrani B K, Bahr R A, Su W J, Cook B S and Tentzeris M M 2017 E-band characterization of 3D-printed dielectrics for fully-printed millimeter-wave wireless system packaging In Proc. 2017 IEEE MTT-S Int. Microwave Symp. (Honololu, HI: IEEE) pp 1756–9
[17] Li J, Wasley T, Nguyen T T, Ta V D, Shephard J D, Stringer J, Smith P, Esenturk E, Connaughton C and Kay R 2016 Hybrid additive manufacturing of 3D electronic systems J. Micromech. Microeng. 26 105005
[18] Zhou W C, List F A, Duty C E and Babu S S 2016 Fabrication of conductive paths on a fused deposition modeling substrate using inkjet deposition Rapid Prototyp. J. 22 77–86
[19] Shrivastva P B, Harteveld C, Boose C A and Kolster B H 1991 Laser-induced prenucleation of alumina for electroless plating Appl. Surf. Sci. 51 165–9
[20] Cai J G, Lv C and Watanabe A 2018 Laser direct writing and selective metallization of metallic circuits for integrated wireless devices ACS Appl. Mater. Interfaces 10 915–24
[21] Zhang J H, Zhou T and Wen L 2017 Selective metallization induced by laser activation: fabricating metallized patterns on polymer via metal oxide composite ACS Appl. Mater. Interfaces 9 8996–9005
[22] Rytlewski P 2014 Laser-assisted metallization of composite coatings containing copper(II) acetylacetonate and copper(II) oxide or copper(II) hydroxide Surf. Coat. Technol. 259 660–6
[23] Zhang J H, Feng J, Jia L Y, Zhang H Y, Zhang G X, Sun S H and Zhou T 2019 Laser-induced selective metallization on polymer substrates using organocopper for portable electronics ACS Appl. Mater. Interfaces 11 13714–23
[24] XiangHQ,ZhouZC,YangY, Yu ZHandLiuJG2022 Fabrication of metallic patterns on ordinary polymer substrates by laser direct activation and electroless plating Surf. Interfaces 33 102209
[25] XiangHQ,NieJK,ZhouZC,YangY, Yu ZHandLiuJG 2023 Selective metallization on ordinary polymer substrates by laser direct activation of copper phosphate or nickel phosphate Langmuir 39 2063–72
[26] LvM,LiuJG,WangSH,AiJandZengXY2016 Higher-resolution selective metallization on alumina substrate by laser direct writing and electroless plating Appl. Surf. Sci. 366 227–32
[27] Wu L X, Meng L, Wang Y Y, Ouyang T Y, Lv M and Zeng X Y 2022 Cu patterns with high adhesion strength and fine resolution directly fabricated on ceramic boards by ultrafast laser modification assisted metallization Surf. Coat. Technol. 435 128211
[28] Xu J et al 2007 Selective metallization on insulator surfaces with femtosecond laser pulses Opt. Express 15 12743–8
[29] Kochemirovsky V A, Khairullina E M, Safonov S V, Logunov L S, Tumkin I I and Menchikov L G 2013 The influence of non-ionic surfactants on laser-induced copper deposition Appl. Surf. Sci. 280 494–9
[30] Wu LX,MengL,WangYY, ZhangSH,BaiWX, Ouyang T T, Lv M and Zeng X Y 2022 Effects of laser surface modification on the adhesion strength and fracture mechanism of electroless-plated coatings Surf. Coat. Technol. 429 127927
[31] LvM,LiuJG,ZengXY, DuQFandAiJ2015 High-adhesion Cu patterns fabricated by nanosecond laser modification and electroless copper plating Appl. Surf. Sci. 353 1150–5
[32] Zhang J H, Zhou T, Xie Y and Wen L 2017 Exposing metal oxide with intrinsic catalytic activity by near-infrared pulsed laser: laser-induced selective metallization on polymer materials Adv. Mater. Interfaces 4 1700937
[33] LiJ,ZhangY, WangPR,WangGQ,LiuYF, LiuYNand Li Q S 2021 Selectively metalizable stereolithography resin for three-dimensional DC and high-frequency electronics via hybrid additive manufacturing ACS Appl. Mater. Interfaces 13 22891–901
[34] Lee S, Wajahat M, Kim J H, Pyo J, Chang W S, Cho S H, Kim J T and Seol S K 2019 Electroless deposition-assisted 3D printing of micro circuitries for structural electronics ACS Appl. Mater. Interfaces 11 7123–30
[35] Rinaldi M, Ghidini T, Cecchini F, Brandao A and Nanni F 2018 Additive layer manufacturing of poly (ether ketone) via FDM Composites B 145 162–72
[36] Wang P, Zou B, Xiao H C, Ding S L and Huang C Z 2019 Effects of printing parameters of fused deposition modeling on mechanical properties, surface quality, and microstructure of PEEK J. Mater. Process. Technol. 271 62–74
[37] YangCC,TianXY, LiDC,CaoY, ZhaoFandShiCQ2017 Influence of thermal processing conditions in 3D printing on the crystallinity and mechanical properties of PEEK material J. Mater. Process. Technol. 248 1–7
[38] Kromer R, Costil S, Cormier J, Berthe L, Peyre P and Courapied D 2016 Laser patterning pretreatment before thermal spraying: a technique to adapt and control the surface topography to thermomechanical loading and materials J. Therm. Spray Technol. 25 401–10
[39] Lambaré C, Tessier P Y, Poncin-Epaillard F and Debarnot D 2015 Plasma functionalization and etching for enhancing metal adhesion onto polymeric substrates RSC Adv. 5 62348–57
[40] Cheng B X, Duan H T, Chen Q, Shang H F, Zhang Y, Li J and Shao T M 2021 Effect of laser treatment on the tribological performance of polyetheretherketone (PEEK) under seawater lubrication Appl. Surf. Sci. 566 150668
[41] Choudary B M, Ravi Kumar K, Jamil Z and Thyagarajan G 1985 A novel ‘anchored’ palladium(II) phosphinated montmorillonite: the first example in the interlamellars of smectite clay J. Chem. Soc., Chem. Commun. 13 931–2
[42] Poole R T, Kemeny P C, Liesegang J, Jenkin J G and Leckey R C G 1973 High resolution photoelectron studies of the d bands of some metals J. Phys. F: Met. Phys 3 L46–8
