[1] You K Y, Fang F Z and Yan G P 2021 Surface generation of tungsten carbide in laser-assisted diamond turning Int. J. Mach. Tools Manuf. 168 103770

[2] FangFZ,LaiM,WangJS,LuoXC,Yan JWandYan YD 2022 Nanometric cutting: mechanisms, practices and future perspectives Int. J. Mach. Tools Manuf. 178 103905

[3] Huang W H and Yan J W 2020 Surface formation mechanism in ultraprecision diamond turning of coarse-grained polycrystalline ZnSe Int. J. Mach. Tools Manuf. 153 103554

[4] Liu K and Melkote S N 2006 Effect of plastic side flow on surface roughness in micro-turning process Int. J. Mach. Tools Manuf. 46 1778–85

[5] WangSJ,XiaSB,WangHL,YinZQandSun ZW2020 Prediction of surface roughness in diamond turning of Al6061 with precipitation effect J. Manuf. Process. 60 292–8

[6] Zong W J, Huang Y H, Zhang Y L and Sun T 2014 Conservation law of surface roughness in single point diamond turning Int. J. Mach. Tools Manuf. 84 58–63

[7] Yang J, Wang X S and Kang M 2018 Finite element simulation of surface roughness in diamond turning of spherical surfaces J. Manuf. Process. 31 768–75

[8] Zhang S J, Yu J J, To S and Xiong Z W 2018 A theoretical and experimental study of spindle imbalance induced forced vibration and its effect on surface generation in diamond turning Int. J. Mach. Tools Manuf. 133 61–71

[9] He C L, Zong W J and Zhang J J 2018 Influencing factors and theoretical modeling methods of surface roughness in turning process: state-of-the-art Int. J. Mach. Tools Manuf. 129 15–26

[10] Lucca D A, Klopfstein M J and Riemer O 2020 . . Ultra-precision machining: cutting with diamond tools J. 1.5354 .0.8252 0.7070 1.3345 Manuf. Sci. Eng. 142 110817 ............... 0.4831 1.1141 0.5157 .0.3012 1.8049 0.0726 0.0766 0.9758 .0.6074 1.1206 0.2066 0.0223 0.4429 2.2253 .1.1515 .0.8800 .0.1060 1.3086 0.8624 .1.0342 ...............

[11] Chen Y, Chen Y H, Long J Y, Shi D C, Chen X, Hou M X, Gao J, Liu H L, He Y B and Fan B 2021 Achieving a sub-10 nm nanopore array in silicon by metal-assisted chemical etching and machine learning Int. J. Extrem. Manuf. 3 035104 Wh1 = .

[12] Liu D H, Wang G, Yu J C and Rong Y M 2017 Molecular .0.9272 .1.1695 .0.5014 .1.0408 dynamics simulation on formation mechanism of grain boundary steps in micro-cutting of polycrystalline copper 0.3370 .0.2839 .1.3325 1.3596 Comput. Mater. Sci. 126 418–25 1.4910 0.2095 0.6587 .0.6576

[13] Eda H, Kishi K and Ueno H 1987 Diamond machining using a 10×4 prototype ultra-precision lathe Precis. Eng. 9 115–22 1.3138 0.7855 0.6329 1.7440

[14] Moriwaki T 1989 Machinability of copper in ultra-precision micro diamond cutting CIRP Ann. 38 115–8

[15] Brinksmeier E, Preuss W, Riemer O and Rentsch R 2017 Cutting forces, tool wear and surface finish in high speed diamond machining Precis. Eng. 49 293–304

[16] Wang Z F, Zhang J J, Zhang J G, Li G, Zhang H J, Ul Hassan H, Hartmaier A, Yan Y D and Sun T 2020 Towards an understanding of grain boundary step in diamond cutting of polycrystalline copper J. Mater. Process. Technol. 276 116400

[17] Tauhiduzzaman M and Veldhuis S C 2014 Effect of material microstructure and tool geometry on surface generation in single point diamond turning Precis. Eng. 38 481–91

[18] Ding X and Rahman M 2012 A study of the performance of cutting polycrystalline Al 6061 T6 with single crystalline diamond micro-tools Precis. Eng. 36 593–603

[19] He C L, Zong W J, Xue C X and Sun T 2018 An accurate 3D surface topography model for single-point diamond turning Int. J. Mach. Tools Manuf. 134 42–68

[20] Ding X, Jarfors A E W, Lim G C, Shaw K C, Liu Y C and Tang L J 2012 A study of the cutting performance of poly-crystalline oxygen free copper with single crystalline diamond micro-tools Precis. Eng. 36 141–52

[21] Gao J, Luo X C, Fang F Z and Sun J N 2022 Fundamentals of atomic and close-to-atomic scale manufacturing: a review Int. J. Extrem. Manuf. 4 012001

[22] Venkatachalam S, Fergani O, Li X P, Yang J G, Chiang K-N and Liang S Y 2015 Microstructure effects on cutting forces and flow stress in ultra-precision machining of polycrystalline brittle materials J. Manuf. Sci. Eng. 137 021020

[23] Chen Y B, Xiong J and Zhang G Q 2021 Generation mechanism of irregular microstructures on the machined surface in single-point diamond turning Int. J. Adv. Manuf. Technol. 113 2701–14

[24] Wang Z et al 2019 Crystal plasticity finite element modeling and simulation of diamond cutting of polycrystalline copper J. Manuf. Process. 38 187–95

[25] Jiang Z L, Ehmann K F and Cao J 2022 Prediction of forming temperature in electrically-assisted double-sided incremental forming using a neural network J. Mater. Process. Technol. 302 117486

[26] Shen Y-F, Pokharel R, Nizolek T J, Kumar A and Lookman T 2019 Convolutional neural network-based method for real-time orientation indexing of measured electron backscatter diffraction patterns Acta Mater. 170 118–31

[27] DaiW, WangHM,GuanQ,LiDY, PengYHandToméCN 2021 Studying the micromechanical behaviors of a polycrystalline metal by artificial neural networks Acta Mater. 214 117006

[28] Sizemore N E, Nogueira M L, Greis N P and Davies M A 2020 Application of machine learning to the prediction of surface roughness in diamond machining Proc. Manuf. 48 1029–40

[29] Jiao Y, Lei S T, Pei Z J and Lee E S 2004 Fuzzy adaptive networks in machining process modeling: surface roughness prediction for turning operations Int. J. Mach. Tools Manuf. 44 1643–51

[30] Liu H Z and Zong W J 2022 Design criterion regarding the edge waviness and sharpness for micro diamond cutting tool J. Mater. Process. Technol. 299 117300

[31] Bougharriou A, Bouzid W and Sa. K 2014 Analytical modeling of surface profile in turning and burnishing Int. J. Adv. Manuf. Technol. 75 547–58

[32] Xu F F, Fang F Z and Zhang X D 2017 Side flow effect on surface generation in Nano cutting Nanoscale Res. Lett. 12 359

[33] He C L, Zong W J and Sun T 2016 Origins for the size effect of surface roughness in diamond turning Int. J. Mach. Tools Manuf. 106 22–42

[34] Liu X, DeVor R E and Kapoor S G 2006 An analytical model for the prediction of minimum chip thickness in micromachining J. Manuf. Sci. Eng. 128 474–81

[35] Heidari M and Yan J W 2018 Nanometer-scale chip formation and surface integrity of pure titanium in diamond turning Int. J. Adv. Manuf. Technol. 95 479–92

[36] Arcona C 1996 Tool Force, Chip Formation and Surface Finish in Diamond Turning (Raleigh: North Carolina State University)

[37] Dao M, Chollacoop N, Van Vliet K J, Venkatesh T A and Suresh S 2001 Computational modeling of the forward and reverse problems in instrumented sharp indentation Acta Mater. 49 3899–918

[38] Kim B-M, Lee C-J and Lee J-M 2010 Estimations of work hardening exponents of engineering metals using residual indentation profiles of nano-indentation J. Mech. Sci. Technol. 24 73–76

[39] Popov V L 2017 Contact Mechanics and Friction: Physical Principles and Applications 2nd edn (Berlin: Springer) pp 9–21

[40] Zhang S J, To S, Wang S J and Zhu Z W 2015 A review of surface roughness generation in ultra-precision machining Int. J. Mach. Tools Manuf. 91 76–95

[41] Cui Z P, Zhang H J, Zong W J, Li G and Du K 2022 Origin of the lateral return error in a five-axis ultraprecision machine tool and its influence on ball-end milling surface roughness Int. J. Mach. Tools Manuf. 178 103907

[42] Abujazar M S S, Fatihah S, Ibrahim I A, Kabeel A E and Sharil S 2018 Productivity modelling of a developed inclined stepped solar still system based on actual performance and using a cascaded forward neural network model J. Clean. Prod. 170 147–59

[43] Vazquez G, Singh P, Sauceda D, Couperthwaite R, Britt N, Youssef K, Johnson D D and Arróyave R 2022 Efficient machine-learning model for fast assessment of elastic properties of high-entropy alloys Acta Mater. 232 117924

[44] ShangHC,Wu PF, LouYS,WangJZandChenQ2022 Machine learning-based modeling of the coupling effect of strain rate and temperature on strain hardening for 5182-O aluminum alloy J. Mater. Process. Technol. 302 117501

[45] Zhang W P, Maleki A, Rosen M A and Liu J Q 2018 Optimization with a simulated annealing algorithm of a hybrid system for renewable energy including battery and hydrogen storage Energy 163 191–207

[46] Hu Y Y, Liu H J and Li D R 2021 Contribution of ultrasonic to microstructure and mechanical properties of tilt probe penetrating friction stir welded joint J. Mater. Sci. Technol. 85 205–17

[47] Pang J J, Liu F C, Liu J, Tan M J and Blackwood D J 2016 Friction stir processing of aluminium alloy AA7075: microstructure, surface chemistry and corrosion resistance Corros. Sci. 106 217–28

[48] Humphreys F J 2004 Characterisation of fine-scale microstructures by electron backscatter diffraction (EBSD) Scr. Mater. 51 771–6

[49] Chen Y-L, Cai Y D, Xu M L, Shimizu Y, Ito S and Gao W 2017 An edge reversal method for precision measurement of cutting edge radius of single point diamond tools Precis. Eng. 50 380–7

[50] He Y, Yan Y D, Geng Y Q and Hu Z J 2017 Fabrication of none-ridge nanogrooves with large-radius probe on PMMA thin-film using AFM tip-based dynamic plowing lithography approach J. Manuf. Process. 29 204–10

[51] Zhang G Q, Han J H, Chen Y B, Xiong J, Wang J P and Ran J Q 2022 Generation mechanism and dual-dynamics simulation of surface patterns in single-point diamond turning of single-crystal copper J. Manuf. Process. 75 1023–38

[52] Tatsuya T, Hiroki T, Hiroshi K and Yoshihiro S 2016 Observation of grain boundary step on the polycrystalline copper surface in ultra-precision turning Proc. JSPE Autumn Conf. (Mito-shi: The Japan Society for Precision Engineering) pp 231–2

[53] Fang F Z, Zhang N, Guo D M, Ehmann K, Cheung B, Liu K and Yamamura K 2019 Towards atomic and close-to-atomic scale manufacturing Int. J. Extrem. Manuf. 1 012001

[54] Kluge M D, Wolf D, Lutsko J F and Phillpot S R 1990 Formalism for the calculation of local elastic constants at grain boundaries by means of atomistic simulation J. Appl. Phys. 67 2370–9

[55] Margolin B Z, Karzov G P, Shvetsova V A and Kostylev V I 1998 Modelling for transcrystalline and intercrystalline fracture by void nucleation and growth Fatigue Fract. Eng. Mater. Struct. 21 123–37

[56] Liu R, Salahshoor M, Melkote S N and Marusich T 2015 A unified material model including dislocation drag and its application to simulation of orthogonal cutting of OFHC Copper J. Mater. Process. Technol. 216 328–38