[1] DUXSON P, PROVIS J L, LUKEY G C, et al. The role of inorganic polymer technology in the development of ‘green concrete’[J]. Cement and Concrete Research, 2007, 37(12): 1590-1597.
[2] APRIANTI E, SHAFIGH P, BAHRI S, et al. Supplementary cementitious materials origin from agricultural wastes: review[J]. Construction and Building Materials, 2015, 74: 176-187.
[3] AKHTAR N, AHMAD T, HUSAIN D, et al. Ecological footprint and economic assessment of conventional and geopolymer concrete for sustainable construction[J]. Journal of Cleaner Production, 2022, 380: 134910.
[7] CHOKKALINGAM P, EL-HASSAN H, EL-DIEB A, et al. Development and characterization of ceramic waste powder-slag blended geopolymer concrete designed using Taguchi method[J]. Construction and Building Materials, 2022, 349: 128744.
[8] LI N, SHI C J, ZHANG Z H, et al. A mixture proportioning method for the development of performance-based alkali-activated slag-based concrete[J]. Cement and Concrete Composites, 2018, 93: 163-174.
[9] NAGHIZADEH A, EKOLU S O, TCHADJIE L N, et al. Long-term strength development and durability index quality of ambient-cured fly ash geopolymer concretes[J]. Construction and Building Materials, 2023, 374: 130899.
[10] ALIABDO A A, ABD ELMOATY A E M, SALEM H A. Effect of water addition, plasticizer and alkaline solution constitution on fly ash based geopolymer concrete performance[J]. Construction and Building Materials, 2016, 121: 694-703.
[11] ZBAYRAK A, KUCUKGONCU H, ATAS O, et al. Determination of stress-strain relationship based on alkali activator ratios in geopolymer concretes and development of empirical formulations[J]. Structures, 2023, 48: 2048-2061.
[13] ABHILASH P, SASHIDHAR C, REDDY I V R.. Strength properties of fly ash and ggbs based geopolymer concrete[J]. International Journal of ChemTech Research, 2016, 9 (3)：350-356.
[24] DEB P S, NATH P, SARKER P K. The effects of ground granulated blast-furnace slag blending with fly ash and activator content on the workability and strength properties of geopolymer concrete cured at ambient temperature[J]. Materials & Design (1980-2015), 2014, 62: 32-39.
