[3] YUAN C J, LI M, WANG M, et al. Sensitive development of latent fingerprints using Rhodamine B-diatomaceous earth composites and principle of efficient image enhancement behind their fluorescence characteristics[J]. Chemical Engineering Journal, 2020, 383: 123076.
[4] ZHANG G X, SUN Z M, DUAN Y W, et al. Synthesis of nano-TiO2/diatomite composite and its photocatalytic degradation of gaseous formaldehyde[J]. Applied Surface Science, 2017, 412: 105-112.
[6] MEI H, HUANG W Z, LIU H X, et al. 3D printed carbon-ceramic structures for enhancing photocatalytic properties[J]. Ceramics International, 2019, 45(12): 15223-15229.
[7] LEFEVERE J, GYSEN M, MULLENS S, et al. The benefit of design of support architectures for zeolite coated structured catalysts for methanol-to-olefin conversion[J]. Catalysis Today, 2013, 216: 18-23.
[8] ZOCCA A, COLOMBO P, GOMES C M, et al. Additive manufacturing of ceramics: issues, potentialities, and opportunities[J]. Journal of the American Ceramic Society, 2015, 98(7): 1983-2001.
[9] DONG W C, MA H Q, LIU R Z, et al. Fabrication by stereolithography of fiber-reinforced fused silica composites with reduced crack and improved mechanical properties[J]. Ceramics International, 2021, 47(17): 24121-24129.
[11] LICCIULLI A, CORCIONE C E, GRECO A, et al. Laser stereolithography of ZrO2 toughened Al2O3[J]. Journal of the European Ceramic Society, 2005, 25(9): 1581-1589.
[12] HINCZEWSKI C, CORBEL S, CHARTIER T. Ceramic suspensions suitable for stereolithography[J]. Journal of the European Ceramic Society, 1998, 18(6): 583-590.
[13] ZHANG S, SHA N, ZHAO Z. Surface modification of α-Al2O3 with dicarboxylic acids for the preparation of UV-curable ceramic suspensions[J]. Journal of the European Ceramic Society, 2017, 37(4): 1607-1616.
[14] KIM J H, CHANG W S, KIM D, et al. 3D printing of reduced graphene oxide nanowires[J]. Advanced Materials (Deerfield Beach, Fla), 2015, 27(1): 157-161.
[15] CHEN Z W, LI J J, LIU C B, et al. Preparation of high solid loading and low viscosity ceramic slurries for photopolymerization-based 3D printing[J]. Ceramics International, 2019, 45(9): 11549-11557.
[16] ZHANG K Q, XIE C, WANG G, et al. High solid loading, low viscosity photosensitive Al2O3 slurry for stereolithography based additive manufacturing[J]. Ceramics International, 2019, 45(1): 203-208.
