[1] ZHU K J, MENG ZH L, QIU J H, et al..Sintering properties of K0.5Na0.5NbO3 lead-free piezoelectric ceramics［J］.Opt. Precision Eng., 2009, 17(1): 132-137. (in Chinese)

[2] QIU J H, JIANG H, JI H L, et al..Design, fabrication and performance evaluation of functionally gradient piezoelectric actuator［J］. Opt. Precision Eng., 2009, 17(1): 118-125. (in Chinese)

[3] BENT A A. Active Fiber Composites for structural Applications［D］. Massachusetts Institute of Technology, 1997.

[4] WILKIE W, BRYANT R G, HIGH J W, et al.. Low-Cost Piezocomposite Actrator for Structrual Control Applications［C］. Proceedings, SPIE’s 7th International Symposium on Smart Structures and Materials, Newport Beach, California, March 5-9, 2000.

[5] BENT A A, HAGOOD N W. Piezoelectric fiber composites with interdigitated electrodes［J］. Journal of Intelligent Material Systems and Structures, 1997, .8(11): 903-19.

[6] CASS R B, DHAN A, MOHAMMADI F. Innovative cermic-fiber technology energizes advanced cerametrics［J］. American Ceramic Society Bulletin, 2003, V82(11): 9701-9706.

[7] WICKRAMASINGHE V K, HAGOOD N W. Durability characterization of active fiber composite actuators for helicopter rotor blade application［J］. Journal of Aircraft, 2004, V41(4): 931-937.

[8] ARON A BENT, NESBITT W HAGOOD, JOHN P RODGERS. Anisotropic Actuation with Piezoelectric Fiber Composites［C］. Proceedings of the DGLR Conference, Germany, 1993.

[9] JI H L, QIU J H, ZHAO Y CH, et al..Semi-active control for structural vibration of cantilever beam based on TMS320F2812［J］. Opt. Precision Eng., 2009, 17(1): 126-131. (in Chinese)

[10] LUO J, QIU J, ZHU K, et al.. Effects of the Calcining Temperature on the Piezoelectric and Dielectric Properties of 0.55PNN-0.45PZT Ceramics［J］. Ferroelectrics, 2011, 425(1): 90-97.

[11] QIU JH, TANI J, YAMADA N, et al.. Fabrication of piezoelectric fibers with metal core［J］. Smart. Mater. Struct. 2003, 5053: 475-483.

[12] QIU JH, TANI J. Vibration Control of a Cylindrical Shell using Distributed Sensors and Actuators［J］. J. Inter. Mat. Sys. Struc. 1995, 6: 474-481.

[13] QIU JH, TANI J, YANADA N, et al.. Fabrication of Pb(Nb, Ni)O3-Pb(Zr, Ti)O3 piezoelectric ceramic fibers by extrusion of a sol-powder mixture［J］. J. Intell. Mater. Syst. Struct. 2004, 15: 643-653.

[14] QIU JH, TANI J, YAMADA N, et al.. Fabrication of piezoelectric fibers with metal core［J］. Smart. Mater. Struct. 2003, 5053: 475-483.

[15] SEBALD G, BENAYAD A, QIU J, et al.. Electromechanical characterization of 0.55Pb(Ni1/3Nb2/3)O3-0.45Pb(Zr0.3Ti0.7)O3 fibers with Pt core［J］. J. Appl. Phys. 2006, 100: 054106.

[16] LUO J, QIU J, ZHU K, et al...Effects of sintering temperature on piezoelectric property of 0.55Pb(Ni1/3Nb2/3)O3-0.45Pb(Zr0.3Ti0.7)O3 ceramics［J］. Journal of Functional Materials, 2010, 7: 1274-77. (in Chinese)

[17] SEBALD G, QIU JH, GUYOMAR D. Modelling the lateral resonance mode of piezoelectric fibres with metal core［J］. J. Phys. D: Appl. Phys. 2005, 38: 3733-40.

[18] SEBALD G, QIU J, GUYOMAR D, et al.. Modeling and Characterization of Piezoelectric Fibers with Metal Core［J］. Jpn. J. Appl. Phys, 2005, 44: 6156-63.

[19] HAJJAJI A, BENAYAD A, SEBALD G, et al.. Synthesis and characterization of 0.65Pb(Mg1/3Nb2/3)O3–0.35PbTiO3 fibers with Pt core［J］. Mater. Res. Bull. 2008, 43: 493-501.

[20] BIAN Y X, QIU J H.Bending vibration model for half coated metal core piezoelectric fiber［J］. Editorial Office of Optics and Precision Engineering, 2011, 19(6): 1298-1305. (in Chinese)

[21] BIAN Y X, QIU J H, WANG X W, et al..Characterization of actuator of half coated metal piezoelectric fiber［J］. Opt. Precision Eng., 2009, 17(1): 109-117. (in Chinese)

[22] HIROSHI SATO, MASARU NAGAMINE. Mechanical properties of metal-core piezoelectric fiber［C］. Smart Structures and Materials 2005, Proceedings of SPIE Vol. 5764 (SPIE, Bellingham, WA, 2005): 623-629.

[23] KIYOSHI TAKAGI, HIROSHI SATO, MUNEHARU SAIGO. Robust vibration control of the metal-core assisted piezoelectric fiber embedded in CFRP composite［C］. Smart Structures and Materials 2004, Proceedings of SPIE Vol. 5383 (SPIE, Bellingham, WA, 2004): 376-385.