[1] MALEKZADEH M, GUL M, KWON I B, et al. An integrated approach for structural health monitoring using an in-house built fiber optic system and nonparametric data analysis[J]. Smart structures and systems,2024, 14(5): 917-942.
[2] DADPAY C, SIVAKUMAR N R, MRAD N. Strain distribution and sensitivity in fiber Bragg grating sensors[J]. SPIE conference on photonics north, 2008, 7099: 689-697.
[3] LEE K Y, LEE K K, HO S L. Exploration of using FBG sensor for derailment detector[J]. WSEAS transactionson systems and control, 2004, 3(6): 2433-2439.
[4] HER S C, WENG S Z. Fiber Bragg grating pressure sensor integrated with epoxy diaphragm[J]. Sensors, 2021, 21(9): 3199.
[5] ZHAO Y, ZHENG H K, LV R Q, et al. A practical FBG pressure sensor based on diaphragm-cantilever[J]. Sensorsand actuators A-physical, 2018, 279: 101-106.
[6] LEAL-JUNIOR A G, DíAZ C A R, FRIZERA A, et al. Simultaneous measurement of pressure and temperature with a single FBG embedded in a polymer diaphragm[J]. Optics and laser technology, 2019, 112: 77-84.
[7] ZHAO Q, ZHENG H K, LV R Q, et al. Novel integrated optical fiber sensor for temperature, pressure and flow measurement[J]. Sensors and actuators A-physical, 2018, 280: 68-75.
[8] AL-FAKIH E A, ABU OSMAN N A, MAHAMD ADIKAN F R, et al. Development and validation of fiber Bragg grating sensing pad for interface pressure measurements within prosthetic sockets[J]. IEEE sensors journal, 2016, 16: 965-974.
[9] GUTIERREZ-RIVERA M, JAUREGUI-VAZQUEZ D, SIERRA-HERNANDEZ J M, et al. Low-pressure fiberoptic sensor by polyester Fabry-Perot cavity and its phase signal processing analysis[J]. Sensors and actuators A-physical, 2020, 315: 112338.
[10] LEAL-JUNIOR A, FRIZERA A, MARQUES C. A fiber Bragg gratings pair embedded in a polyurethane diaphragm:towards a temperature-insensitive pressure sensor[J].Optics and laser technology, 2020, 131: 106440.
[11] WANG W, ZHOU X, WU W, et al. Monolithic structure-opticalfiber sensor with temperature compensation for pressure measurement[J]. Materials, 2019, 12: 552.
[12] XU M G, REEKIE L, CHOW Y T, et al. Optical in-fiber grating high pressure sensor[J]. Electronics letters, 1993, 29: 398-399.
[13] SENGUPTA D, SHANKAR M S, REDDY P S, et al. Sensing of hydrostatic pressure using FBG sensor for liquid level measurement[J]. Microwave and opticaltechnology letters, 2012, 7: 1679-1683.
[14] WANG H P, XIANG P, LI X. Theoretical analysis on strain transfer error of FBG sensors attached on steel structures subjected to fatigue load[J]. Strain, 2016, 52(6): 522-530.
[15] KALIZHANOVA A, KUNELBAYEV M, KOZBAKOVA A, et al. Computation of temperature, deformation and pressure in engineering and building structures using fiber Bragg sensor with tilted grating in Kazakhstan[J]. Materials today: proceedings, 2022, 50: 1333-1340.
[16] FARINAZ K, MOJTABA K, KHASHAYAR K. Structural health monitoring: modeling of simultaneous effects of strain, temperature, and vibration on the structure using a single apodized π-phase shifted FBG sensor[J].Results in optics, 2022, 9: 100323.
[17] ?áPOVá K, VELEBIL L, V?ELáK J. Laboratory and in-situ testing of integrated FBG sensors for SHM for concrete and timber structures[J]. Sensors, 2020, 20: 1661.
[18] QIN H, TANG P, LEI J, et al. Investigation of straintemperature cross-sensitivity of FBG strain sensors embedded onto different substrates[J]. Photonic sensors, 2023, 13: 230127.
