[1] BAO Yiwang, KUANG Fenghua, SUN Yi, et al. A simple way to make pre-stressed ceramics with high strength［J］. J Materiomics, 2019(5): 657-662.
[2] SUZUKI Akihiko, BABA Hidenari. Assessment of damage tolerance and reliability for ceramics［J］. Mater Sci Res Int, 2003(9): 160-166.
[3] SHEN Zhijian, ZHAO Zhe, NYGREN Mats, et al. Formation of tough interlocking microstructures in silicon nitride ceramics by dynamic ripening［J］. Nature, 2002, 417: 266-269.
[4] KIM J Y, AN H G, KIM Y W. Rcurve behaviour and microstructure of liquid-phase sintered α-SiC［J］. J Mater Sci, 2000, 35: 3693-3697.
[5] KOOI B J, POPPEN R J, CARVALHO N J M. et al. Ti3SiC2: A damage tolerant ceramic studied with nano-indentations and transmission electron microscopy［J］. Acta Mater, 2003, 51: 2859-2872.
[6] BAO Y W, HU C F, ZHO Y C U. Damage tolerance of nanolayer grained ceramics and quantitative estimation［J］. Mater Sci Technol, 2006, 22(2): 227-230.
[7] LI Kunming, BAO Yiwang, WAN Detian, et al. Evaluating absolute hardness of ceramic coatings using relative method［J］. Key Eng Mater, 2010, 916(434/435): 530-533.
[8] LI Haiyan, HAO Hongjian, TIAN Yuan, et al. Effects of residual stresses on strength and crack resistance in ZrO2 ceramics with alumina coating(in Chinese)［J］. J Inorg Mater, 2022, 37(4): 467-472.
[9] BAO Yiwang, SUN Yi, KUANG Fenghua, et al. Development and prospects of high strength pre-stressed ceramics［J］. J Inorg Mater, 2020, 35(4): 399-406.
[10] TIAN Wenyan, WANG Wenxu, LUO Shoujing. Effect of sintering process on bending strength of synthetic mullite(in Chinese)［J］. Refractory, 2000, 34(6): 325-327.
[13] HAO Hongjian, LI Haiyan, WAN Detian. Flexural strength and thermal shock resistance of mullite/alumina prestressed coating reinforced alumina(in Chinese). ［J/OL］. J Inorg Mater. ［2022-12-19］. http://kns.cnki.net/kcms/detail/31.1363.TQ.20220818.1129.006.html.
[14] JIANG Ru, SUN Xun, LIU Haitao, et al. Microstructure and mechanical properties improvement of the Nextel 610 fiber reinforced alumina composite［J］. J Eur Ceram Soc, 2021, 41(10): 5394-5399.
