[1] Haihu YU, Ying WANG, Jian MA et al. Fabry-perot interferometric high-temperature sensing up to 1 200 ℃ based on a silica glass photonic crystal fiber. Sensors, 18, 273-281(2018).

[2] Maoxiang HOU, Feng ZHU, Ying WANG et al. Antiresonant reflecting guidance mechanism in hollow-core fiber for gas pressure sensing. Optics Express, 24, 27890-27898(2016).

[3] S MITANI, K NIGO, S KARASAWA et al. Interferometric fiber-optic gyroscope using multi-core fiber. Journal of Lightwave Technology, 37, 5525-5530(2019).

[4] K HOTATE, M HARUMOTO. Resonator fiber optic gyro using digital serrodyne modulation. Journal of Lightwave Technology, 15, 466-473(1997).

[5] Qiang LIU, Shuguang LI, Hailiang CHEN. Enhanced sensitivity of temperature sensor by a PCF with a defect core based on Sagnac interferometer. Sensors and Actuators B: Chemical, 254, 636-641(2018).

[6] Jincheng ZHAO, Yong ZHAO, Lu BAI et al. Sagnac interferometer temperature sensor based on microstructured optical fiber filled with glycerin. Sensors and Actuators A: Physical, 314, 112245(2020).

[7] F RABBI, M T RAHMAN, A KHALEQUE et al. Theoretical analysis of Sagnac interferometer based highly sensitive temperature sensor on photonic crystal fiber. Sensing and Bio-Sensing Research, 31, 100396(2021).

[8] Fei QI, Yi XIN, Xinyong DONG et al. Sagnac interferometer based temperature sensor with alcohol-filled side-hole fiber. Laser & Optoelectronics Progress, 50, 010601(2013).

[9] Juan RUAN, Lirui HU, Anshan LU et al. Temperature sensor employed TCF-PMF fiber structure-based Sagnac interferometer. IEEE Photonics Technology Letters, 29, 1364-1366(2017).

[10] Zhaolun LIU, Yanru SUI, Xiaojie GUO et al. A spiral photonic crystal fiber capable of transmitting orbital angular momentum. Semiconductor Optoelectronics, 43, 347-352, 388(2022).

[11] Liangliang LV, Qiang LIU, Pingsheng XUE. The sensing characteristics of microstructure-core photonic crystal fiber filled with liquid based on Sagnac interferometer. Results in Physics, 18, 103198(2020).

[12] Xu WANG, Xiangying HAO, Shun WU. Simulation of highly sensitive temperature sensing based on a selectively ethanol-filled twin-core photonic crystal fiber. Optics Communications, 508, 127769(2022).

[13] Ying CUI, P P SHUM, D J J HU et al. Temperature sensor by using selectively filled photonic crystal fiber Sagnac interferometer. IEEE Photonics Journal, 4, 1801-1808(2012).

[14] Xuegang LI, Yong ZHAO, Xue ZHOU et al. High sensitivity all-fiber Sagnac interferometer temperature sensor using a selective ethanol-filled photonic crystal fiber. Instrumentation Science & Technology, 46, 253-264(2018).

[15] Jianjun WU. The study of photonic crystal fiber sensor based on Sagnac interferometer, 33-34(2017).

[16] Lei LIU, Hui CHEN, Yanjun ZHANG. Refractive index sensing simulation analysis of four-pole suspended core fiber based on surface plasmon resonance. Acta Optical Sinica, 42, 0806003(2022).

[17] M PANG, Limin XIAO, Wen JIN et al. Birefringence of hybrid PCF and its sensitivity to strain and temperature. Journal of Lightwave Technology, 30, 1422-1432(2012).

[18] Fanlong MENG, Hong WANG, Di FANG. Research on D-shape open-loop PCF temperature refractive index sensor based on SPR effect. IEEE Photonics Journal, 14, 1-5(2022).

[19] Tiesheng WU, Li WANG, Zhe WANG et al. A photonic crystal fiber temperature sensor based on Sagnac interferometer structure. Chinese Journal of Lasers, 39, 1114002(2012).

[20] Jiacheng XU, Fei YU, Bingsheng XU et al. Research on influence of drawing tension and heat treatment on the birefringence of panda-type polarization-maintaining fiber. Acta Photonica Sinica, 50, 1106002(2021).

[21] Tiantian HAN, Yange LIU, Zhi WANG et al. Control and design of fiber birefringence characteristics based on selective-filled hybrid photonic crystal fibers. Optics Express, 22, 15002-15016(2014).

[22] R BOUFENAR, M BOUAMAR, A HOCINI. Simulation and numerical analysis of highly birefringent photonic crystal fiber for temperature sensing application. Photonics and Nanostructures-Fundamentals and Applications, 24, 47-52(2017).

[23] Minghao ZHOU. A novel highly birefringent PCF based on lattice structure of elliptic layer, 35-41(2016).

[24] Qiang LIU, Shuguang LI, Min SHI. Fiber Sagnac interferometer based on a liquid-filled photonic crystal fiber for temperature sensing. Optics Communications, 381, 1-6(2016).

[25] Xuegang LI, Yong ZHAO, Xue ZHOU et al. High sensitivity all-fiber Sagnac interferometer temperature sensor using a selective ethanol-filled photonic crystal fiber. Instrumentation Science & Technology, 46, 253-264(2018).

[26] M S HOSSAIN, M FAISAL. Theoretical investigation of mid infrared temperature sensor based on Sagnac interferometer using chloroform filled photonic crystal fiber. IEEE Sensors Journal, 21, 24157-24165(2021).

[27] A GHAZANFARI, Wenbing LI, M C LEU et al. A novel freeform extrusion fabrication process for producing solid ceramic components with uniform layered radiation drying. Additive Manufacturing, 15, 102-112(2017).

[28] A M CUBILLAS, S UNTERKOFLER, T G EUSER et al. Photonic crystal fibers for chemical sensing and photochemistry. Chemical Society Reviews, 42, 8629-864(2013).

[29] H EBENDORFF-HEIDEPRIEM, J SCHUPPICH, A DOWLER et al. 3D-printed extrusion dies: a versatile approach tooptical material processing. Optical Materials Express, 4, 1494-1504(2014).

[30] H El HAMZAOUI, Y OUERDANE, L BIGOT et al. Sol-gel derived ionic copper-doped microstructured optical fiber: a potential selective ultraviolet radiation dosimeter. Optics Express, 20, 29751-29760(2012).

[31] N A ISSA, M A VAN EIJKELENBORG, M FELLEW et al. Fabrication and study of microstructured optical fibers with elliptical holes. Optics Letters, 29, 1336-1338(2004).

[32] C KERBAGE, P STEINVURZEL, P REYES et al. Highly tunable birefringent microstructured optical fiber. Optics Letters, 27, 842-844(2002).

[33] Wenwen QIAN, Chunliu ZHAO, Yunpeng WANG et al. Partially liquid-filled hollow-core photonic crystal fiber polarizer. Optics Letters, 36, 3296-3298(2011).

[34] Yiping WANG, Xiaoling TAN, Wen JIN et al. Improved bending property of half-filled photonic crystal fiber. Optics Express, 18, 12197-12202(2010).

[35] Limin XIAO, Wen JIN, M DEMOKAN et al. Fabrication of selective injection microstructured optical fibers with a conventional fusion splicer. Optics Express, 13, 9014-9022(2005).

[36] Jian JU, Haifeng XUAN, Wen JIN et al. Selective opening of airholes in photonic crystal fiber. Optics Letters, 35, 3886-3888(2010).

[37] Yanyi HUANG, Yong XU, A YARIV. Fabrication of functional microstructured optical fibers through a selective-filling technique. Applied Physics Letters, 85, 5182-5184(2004).