Journals >Chinese Optics Letters
Contents
2007
Volume: 5 Issue 1
19 Article(s)
Export citation format
Research Article
Measurement of scintillation and link margin for laser beam propagation on 3.5-km urbanised path
, , , and
An experiment of laser propagation was carried out at the urban terrain range of 3.5 km during the period of March to May of 2006. The received intensity scintillations and atmosphere turbulence strength in complex urban atmosphere circumstance were simultaneously measured concentratively. The results show the statistiAn experiment of laser propagation was carried out at the urban terrain range of 3.5 km during the period of March to May of 2006. The received intensity scintillations and atmosphere turbulence strength in complex urban atmosphere circumstance were simultaneously measured concentratively. The results show the statistical characteristics of irradiance scintillation and atmosphere turbulence strength and link fade margin for urban free-space optical links..
Chinese Optics Letters
- Publication Date: Jan. 01, 1900
- Vol. 5, Issue 1, 1 (2007)
Study on the approximative formula for the far-field of a Gaussian beam under circular aperture diffraction and its divergence
, , and
The approximative formula for the far-field diffraction of a Gaussian beam through a circular aperture is obtained by using the superposition of Gaussian beams instead of the aperture function, and the explicit expression for calculating the beam divergence is also gained. Using the formula, the influences of the aberrThe approximative formula for the far-field diffraction of a Gaussian beam through a circular aperture is obtained by using the superposition of Gaussian beams instead of the aperture function, and the explicit expression for calculating the beam divergence is also gained. Using the formula, the influences of the aberrations on the far-field wavefront and the beam's divergence are researched, and the results show that the large aberrations badly affect the far-field wavefront and the divergence. It is suggested that the aberrations and the diffractions should be avoided when designing the transmitter..
Chinese Optics Letters
- Publication Date: Jan. 01, 1900
- Vol. 5, Issue 1, 4 (2007)
Generation of millimeter-wave sub-carrier optical pulse by using a Fabry-Perot interferometer
, , and
A novel scheme is proposed to transform a Gaussian optical pulse to a millimeter-wave (mm-wave) frequency modulation pulse by using a Fabry-Perot interferometer (FPI) for radio-over-fiber (ROF) system. It is shown that modulation frequency of mm-wave is determined by the optical path of the Fabry-Perot (F-P) cavity, anA novel scheme is proposed to transform a Gaussian optical pulse to a millimeter-wave (mm-wave) frequency modulation pulse by using a Fabry-Perot interferometer (FPI) for radio-over-fiber (ROF) system. It is shown that modulation frequency of mm-wave is determined by the optical path of the Fabry-Perot (F-P) cavity, and amplitude decay time and energy transfer efficiency are related to the reflectivity of the F-P cavity mirror. The effect of pulse train extension on inter-symbol interference is also discussed..
Chinese Optics Letters
- Publication Date: Jan. 01, 1900
- Vol. 5, Issue 1, 8 (2007)
Broadband dispersion compensation using microstructure fibers
, , , ... and |Show fewer author(s)
Dispersion and dispersion slope compensation of 10-Gb/s pulses using microstructure fibers (MFs) is demonstrated experimentally. A 26-m MF is used to compensate the dispersion of 2-km standard singe mode fiber in a 20-nm range in C band. The experimental results show that a significant improvement can be achieved in thDispersion and dispersion slope compensation of 10-Gb/s pulses using microstructure fibers (MFs) is demonstrated experimentally. A 26-m MF is used to compensate the dispersion of 2-km standard singe mode fiber in a 20-nm range in C band. The experimental results show that a significant improvement can be achieved in the quality of the observed pulses with the dispersion compensation. Moreover, the further research shows that the MF can compensate the anomalous dispersion of a single mode fiber within +-0.27 ps/(nm.km) over a 50-nm wavelength range from 1520 to 1570 nm..
Chinese Optics Letters
- Publication Date: Jan. 01, 1900
- Vol. 5, Issue 1, 11 (2007)
A novel scheme of label abstraction and erasion based on Fabry-Perot semiconductor optical amplifier
, , , and
A novel label abstraction and erasion scheme based on a Fabry-Perot semiconductor optical amplifier (FP-SOA) is proposed for all-optical separation of the bit-serial label from payload and its performance is investigated by simulation. Important features of this scheme are that it does not make use of any high-speed elA novel label abstraction and erasion scheme based on a Fabry-Perot semiconductor optical amplifier (FP-SOA) is proposed for all-optical separation of the bit-serial label from payload and its performance is investigated by simulation. Important features of this scheme are that it does not make use of any high-speed electronics and only one device is needed. Using this scheme, label abstraction and erasion can be realized with the extinction ratio of 9.72 and 7.05 dB, respectively..
Chinese Optics Letters
- Publication Date: Jan. 01, 1900
- Vol. 5, Issue 1, 14 (2007)
Fractional Fourier transform of apertured paraboloid refracting system
, , , and
The limitation of paraxial condition of paraboloid refracting system in performing fractional Fourier transform acts like an aperture, which makes the system different from ideal systems. With aperture expanded as the sum of finite complex Gaussian terms, a more practical approximate analytical solution of fractional FThe limitation of paraxial condition of paraboloid refracting system in performing fractional Fourier transform acts like an aperture, which makes the system different from ideal systems. With aperture expanded as the sum of finite complex Gaussian terms, a more practical approximate analytical solution of fractional Fourier transform of Gaussian beam in an apertured paraboloid refracting system is obtained and also numerical investigation is presented. Complicated and practical fractional Fourier transform systems can be constructed by cascading several apertured paraboloid refracting systems which are the simplest and the most basic units for performing more precise transform..
Chinese Optics Letters
- Publication Date: Jan. 01, 1900
- Vol. 5, Issue 1, 18 (2007)
Rotation, scaling, and translation invariant local watermarking technique with Krawtchouk moments
, , , and
A rotation, scaling, and translation invariant local watermarking is proposed with one or two Krawtchouk moment(s) of the original to estimate the geometric distortion parameters including rotation angle, scaling factor, and translation parameter. Krawtchouk moments can be used as private key of watermark extractor. WaA rotation, scaling, and translation invariant local watermarking is proposed with one or two Krawtchouk moment(s) of the original to estimate the geometric distortion parameters including rotation angle, scaling factor, and translation parameter. Krawtchouk moments can be used as private key of watermark extractor. Watermark is inserted into perceptually significant Krawtchouk moments of original, and watermark based on Krawtchouk moments is local. Independent component analysis (ICA) is utilized to extract watermark blindly. Experimental results show that this method has a good robustness against distortions preformed by watermark benchmark -- Stirmark..
Chinese Optics Letters
- Publication Date: Jan. 01, 1900
- Vol. 5, Issue 1, 21 (2007)
A modified region growing algorithm for multi-colored image object segmentation
, and
A hybrid algorithm based on seeded region growing and k-means clustering was proposed to improve image object segmentation result. A user friendly segmentation tool was provided for the definition of objects, then k-means algorithm was utilized to cluster the selected points into k seeds-clusters, finally the seeded reA hybrid algorithm based on seeded region growing and k-means clustering was proposed to improve image object segmentation result. A user friendly segmentation tool was provided for the definition of objects, then k-means algorithm was utilized to cluster the selected points into k seeds-clusters, finally the seeded region growing algorithm was used for object segmentation. Experimental results show that the proposed method is suitable for segmentation of multi-colored object, while conventional seeded region growing methods can only segment uniform-colored object..
Chinese Optics Letters
- Publication Date: Jan. 01, 1900
- Vol. 5, Issue 1, 25 (2007)
A color correction algorithm for noisy multi-view images
, , , and
A novel color correction algorithm for noisy multi-view images is presented. The key idea is to use the improved Karhunen-Loeve (K-L) transform to obtain correction matrix that can eliminate noise effect to the fullest extent. Noise variance estimation is first performed in the algorithm. In the end, wavelet transform A novel color correction algorithm for noisy multi-view images is presented. The key idea is to use the improved Karhunen-Loeve (K-L) transform to obtain correction matrix that can eliminate noise effect to the fullest extent. Noise variance estimation is first performed in the algorithm. In the end, wavelet transform is applied to denoise the corrected image. Experimental results show that, compared with traditional correction method, a well-performed correction result is achieved using the proposed method, and the visual effect of the denoised corrected image is almost consistent with ideal corrected image..
Chinese Optics Letters
- Publication Date: Jan. 01, 1900
- Vol. 5, Issue 1, 28 (2007)
Calculation method for particle mean diameter and particle size distribution function under dependent model algorithm
, , and
In total light scattering particle sizing technique, the relationship among Sauter mean diameter D32, mean extinction efficiency Q, and particle size distribution function is studied in order to inverse the mean diameter and particle size distribution simply. We propose a method which utilizes the mean extinction efficIn total light scattering particle sizing technique, the relationship among Sauter mean diameter D32, mean extinction efficiency Q, and particle size distribution function is studied in order to inverse the mean diameter and particle size distribution simply. We propose a method which utilizes the mean extinction efficiency ratio at only two selected wavelengths to solve D32 and then to inverse the particle size distribution associated with Q and D32. Numerical simulation results show that the particle size distribution is inversed accurately with this method, and the number of wavelengths used is reduced to the greatest extent in the measurement range. The calculation method has the advantages of simplicity and rapidness..
Chinese Optics Letters
- Publication Date: Jan. 01, 1900
- Vol. 5, Issue 1, 31 (2007)
Phase locking of two beams emitting from a side pumped Nd:YAG slab with self-imaging resonator
, , and
Intracavity phase locking of two beams emitting from a block of Nd:YAG medium side-pumped by laser diode array (LDA) was investigated experimentally. The interference fringes of the two beams occured at the output mirror. The coherent output power of 1.13 W was obtained with combination efficiency of 64.9% and coherencIntracavity phase locking of two beams emitting from a block of Nd:YAG medium side-pumped by laser diode array (LDA) was investigated experimentally. The interference fringes of the two beams occured at the output mirror. The coherent output power of 1.13 W was obtained with combination efficiency of 64.9% and coherence degree of about 60%. Only a metallic wire as a filter located at a suitable position close to the output mirror can efficiently lock the entire structure with less than 8% power loss..
Chinese Optics Letters
- Publication Date: Jan. 01, 1900
- Vol. 5, Issue 1, 34 (2007)
Direct manufacturing of Cu-based alloy parts by selective laser melting
, , and
The frequent defects of the metal parts, such as non-fully melting, thermal strain, and balling, which are produced by selective laser melting (SLM) that is a novel method of one-step manufacturing, are analyzed theoretically and experimentally. The processing parameters significantly affect the quality of the final paThe frequent defects of the metal parts, such as non-fully melting, thermal strain, and balling, which are produced by selective laser melting (SLM) that is a novel method of one-step manufacturing, are analyzed theoretically and experimentally. The processing parameters significantly affect the quality of the final parts, and simultaneously, the appropriate laser mode and the special scanning strategy assure a satisfying quality of the final parts. The SLM experiment is carried out using Cu-based powder. The metal part is divided into several scanned regions, each of which is scanned twice at the cross direction with different scanning speeds. The microstructure is analyzed on microscope. The results show that the part is metallurgically bonded entity with a relative density of 95%, and the microstructure is composed of equiaxial crystal and dendritic crystal whose distributions are mainly decided by the scanning strategy..
Chinese Optics Letters
- Publication Date: Jan. 01, 1900
- Vol. 5, Issue 1, 37 (2007)
The effects of B/(B+Al) ratio on glass formation regions and properties of phosphate edge-cladding glasses
, , and
The glass-forming region of P2O5-Al2O3-B2O3-ZnO-Na2O-CuCl system with different Al2O3 and B2O3 contents was studied. The dependence of glasses properties on B/(B+Al) ratio was investigated. The absorption coefficient of copper ion in a specific glass was measured. These results are very helpful to the designing of a clThe glass-forming region of P2O5-Al2O3-B2O3-ZnO-Na2O-CuCl system with different Al2O3 and B2O3 contents was studied. The dependence of glasses properties on B/(B+Al) ratio was investigated. The absorption coefficient of copper ion in a specific glass was measured. These results are very helpful to the designing of a cladding glass for large size neodymium phosphate glass..
Chinese Optics Letters
- Publication Date: Jan. 01, 1900
- Vol. 5, Issue 1, 41 (2007)
Use of wavelet in specifying optics
, , and
Using power spectral density (PSD) function to specify large aperture optical components' quality of laser system is universal. But it cannot provide effective guidance to eliminate certain frequency segment error. In order to solve this problem, two-dimensional discrete wavelet transform (2D-DWT) is used to separaUsing power spectral density (PSD) function to specify large aperture optical components' quality of laser system is universal. But it cannot provide effective guidance to eliminate certain frequency segment error. In order to solve this problem, two-dimensional discrete wavelet transform (2D-DWT) is used to separate frequency segment error and detect the corresponding region of certain frequency segment error, which is used as feedback to a machining process. The experimental results show that the corresponding region of certain frequency segment can be found and machining can be guided effectively by using wavelet..
Chinese Optics Letters
- Publication Date: Jan. 01, 1900
- Vol. 5, Issue 1, 44 (2007)
Faraday rotation in a resonant five-level system via electromagnetically induced transparency
, and
We study the Faraday rotation of polarization of a probe field in a cold, coherently driven five-level system with an M-type configuration. By means of a method of multiple scales we derive two coupled nonlinear envelope equations, which govern the evolution of two circularly polarized components of the probe field. ItWe study the Faraday rotation of polarization of a probe field in a cold, coherently driven five-level system with an M-type configuration. By means of a method of multiple scales we derive two coupled nonlinear envelope equations, which govern the evolution of two circularly polarized components of the probe field. It is shown that due to the quantum interference effect induced by two control fields, one can obtain a large rotation angle with a very low absorption of the probe field. In addition, an efficient control over the polarization state of the probe field in the system can also be easily realized..
Chinese Optics Letters
- Publication Date: Jan. 01, 1900
- Vol. 5, Issue 1, 47 (2007)
Detection of air target based on multi-fractal analysis in a laser radar
, and
A novel approach for detecting laser radar target based on multi-fraction dimension (MFD) of laser clutters has been proposed. The fractal dimension (FD) of laser clutter and the echoes from the plan are estimated using box-counting dimension algorithm. The intrinsic difference in the spectrum of FD Dq between them is A novel approach for detecting laser radar target based on multi-fraction dimension (MFD) of laser clutters has been proposed. The fractal dimension (FD) of laser clutter and the echoes from the plan are estimated using box-counting dimension algorithm. The intrinsic difference in the spectrum of FD Dq between them is extracted and used to detect targets. Experimental results show that the method based on MFD is more reliable than that on FD and can improve the accuracy of detection..
Chinese Optics Letters
- Publication Date: Jan. 01, 1900
- Vol. 5, Issue 1, 51 (2007)
A high sensitivity spectrometer with tunable diode laser for ambient methane monitoring
, , , ... and |Show fewer author(s)
Tunable diode laser absorption spectroscopy (TDLAS) has been widely employed in atmospheric trace gases detection. In the measurement of these trace gases, harmonic detection combined with a multi-pass white cell could remarkably enhance the detection sensitivity. In this paper, a portable TDLAS system built specificalTunable diode laser absorption spectroscopy (TDLAS) has been widely employed in atmospheric trace gases detection. In the measurement of these trace gases, harmonic detection combined with a multi-pass white cell could remarkably enhance the detection sensitivity. In this paper, a portable TDLAS system built specifically for long time monitoring methane in the atmosphere is introduced. The detection limit is below 100 ppb that is enough for the monitoring of ambient methane, and the long time monitoring results obtained in Beijing are given, which is well coincident with that of the Fourier transform infrared (FTIR) spectroscopy..
Chinese Optics Letters
- Publication Date: Jan. 01, 1900
- Vol. 5, Issue 1, 54 (2007)
Laser-induced breakdown spectroscopy based detection of lunar soil simulants for moon exploration
, , , ... and |Show fewer author(s)
A scientific goal of the moon exploration project is to perform elemental analysis on the moon surface. The assuming of using laser-induced breakdown spectroscopy (LIBS) for this goal has been put forward. The laser plasma used by LIBS is sensitive to the surrounding atmosphere and the moon has very low ambient gas preA scientific goal of the moon exploration project is to perform elemental analysis on the moon surface. The assuming of using laser-induced breakdown spectroscopy (LIBS) for this goal has been put forward. The laser plasma used by LIBS is sensitive to the surrounding atmosphere and the moon has very low ambient gas pressure on the surface, so the study of the LIBS capabilities at the low pressure was carried out..
Chinese Optics Letters
- Publication Date: Jan. 01, 1900
- Vol. 5, Issue 1, 58 (2007)
Design and preparation of frequency doubling antireflection coating with different thicknesses of interlayer for LiB3O5 crystal
, , , ... and |Show fewer author(s)
Design and preparation of frequency doubling antireflection coating with different thicknesses of interlayer were investigated for LiB3O5 (LBO) substrate. The design was based on the vector method. The thickness of the inserted SiO2 interlayer could be changed in a wide range for the four-layer design with two zeros atDesign and preparation of frequency doubling antireflection coating with different thicknesses of interlayer were investigated for LiB3O5 (LBO) substrate. The design was based on the vector method. The thickness of the inserted SiO2 interlayer could be changed in a wide range for the four-layer design with two zeros at 1064 and 532 nm. The coatings without any interlayer and with 0.1 quarter-wave (QW), 0.3 QW, 0.5 QW SiO2 interlayer were deposited respectively on LBO by using electron beam evaporation technique. All the prepared coatings with SiO2 interlayer indicated satisfying optical behavior. This expanded our option for the thickness of an interlayer when coating on LBO substrate. The prepared films with SiO2 interlayer showed better adhesion than that without any interlayer. The thickness of the interlayer affected the adhesion, the adhesion for the coating with 0.5 QW SiO2 interlayer was not as good as the other two..
Chinese Optics Letters
- Publication Date: Jan. 01, 1900
- Vol. 5, Issue 1, 60 (2007)
© Copyright 2018-2021 | Chinese Laser Press. All Rights Reserved 沪ICP备15018463号-20