[1] T Y WANG, R Y LUO. Dynamic oxidation and protection of the PAN pre-oxidized fiber C/C composites.
[2] K I TRIANTOU, K MERGIA, B PEREZ et al. Thermal shock performance of carbon-bonded carbon fiber composite and ceramic matrix composite joints for thermal protection re-entry applications.
[4] X Y LIU, J ZHANG, L T ZHANG et al. Failure mechanism of C/SiC Composites under stress in oxidizing environments.
[5] M PATEL, K SAURABH, V V B PRASAD et al. High temperature C/C-SiC composite by liquid silicon infiltration: a literature review.
[7] W WANG, C J ZHOU, G W LIU et al. Molten salt synthesis of mullite whiskers on the surface of SiC ceramics.
[8] W G CHI, D L JIANG, Z R HUANG et al. Sintering behavior of porous SiC ceramics.
[9] Z B NIU, Z LI, P XIAO et al. Influence of h-BN as additive on microstructure and oxidation mechanism of C/C-SiC composite.
[10] X G LUAN, Y ZOU, X H HAI et al. Degradation mechanisms of a self-healing SiC(f)/BN(i)/[SiC-B4C](m) composite at high temperature under different oxidizing atmospheres.
[11] C L HU, S F TANG, S Y PANG et al. Long-term oxidation behaviors of C/SiC composites with a SiC/UHTC/SiC three-layer coating in a wide temperature range.
[13] Q ZHOU, S M DONG, Y S DING et al. Three-dimensional carbon fiber-reinforced silicon carbide matrix composites by vapor silicon infiltration.
[14] Z X TANG, M Z YI, Y M ZHOU et al. Effect of high-temperature heat treatment on the microstructure and mechanical behavior of PIP-based C/C-SiC composites with SiC filler.
[15] R V P KAVITI, D JEYASIMMAN, G PARANDE et al. Investigation on dry sliding wear behavior of Mg/BN nanocomposites.
[16] J W LI, Y Li, Z Li et al. Flexibly tailored microstructure and tribological properties of carbon/carbon composites via combination of h-BN powdered addition and heat-treatment.
[17] P XIAO, Z Y LIU, Z C LI et al. Oxidation behavior of carbon/carbon-boron nitride composites fabricated by additives and chemical vapor infiltration.
[18] Y H XU, Z X JI, Z Y YANG et al. Densification and comprehensive properties of h-BN-based refractories with in-situ formation of Y3Al5O12.
[19] X M FAN, X W YIN, Y CHENG et al. Microstructure and tribological behaviors of C/C-BN composites fabricated by chemical vapor infiltration.
[20] C Q TONG, L F CHENG, X W YIN et al. Oxidation behavior of 2D C/SiC composite modified by SiB4 particles in inter-bundle pores.
[21] X M DUAN, Z H YANG, L CHEN et al. Review on the properties of hexagonal boron nitride matrix composite ceramics.
[22] F H LIU, M Z YI, L Q RAN et al. Effects of h-BN/SiC ratios on oxidation mechanism and kinetics of C/C-BN-SiC composites.
[23] F H LIU, M Z YI, L Q RAN et al. Effect of silane grafted h-BN fillers on microstructure and mechanical properties of CVI-based C/C-BN composites.
[24] Y NING, F H LIU, L P RAN et al. Effect of preparation method on the mechanism for oxidation of C/C-BN composites.
[25] Z B NIU, P XIAO, Z LI et al. Effects of h-BN particles on the structure, oxidation behaviour, and kinetics of C/C composites fabricated via CVI.
[26] Z B NIU, F CHEN, P XIAO et al. Effect of h-BN addition on friction and wear properties of C/C-SiC composites fabricated by LSI.
[27] R D ZHAO, S Y PANG, C L HU et al. Fabrication of C/SiC composites by siliconizing carbon fiber reinforced nanoporous carbon matrix preforms and their properties.
[28] Y S LIU, L T ZHANG, L F CHENG et al. Preparation and oxidation resistance of 2D C/SiC composites modified by partial boron carbide self-sealing matrix.
