Qiaolei LI, Yue GU, Xuehua YU, Chaowei ZHANG, Mingke ZOU, Jingjing LIANG, Jinguo LI. Effect of Sintering Temperature on Surface Morphology and Roughness of 3D-printed Silicon Ceramic Cores [J]. Journal of Inorganic Materials, 2022, 37(3): 325
- Journal of Inorganic Materials
- Vol. 37, Issue 3, 325 (2022)
1. Thermal analysis graphs of ceramic green body
2. SEM images of ceramic cores sintered at different temperatures
3. EPMA element distribution analysis results of ceramic cores sintered at different temperatures
4. Element distributions of the ceramic cores sintered at 1250 ℃ for as-obtained sample (a-c) and simulated casting samples at 1500 ℃ (d-f)
5. XRD patterns of ceramic cores sintered at different temperatures
6. Open porosities of the ceramic cores sintered at different temperatures for as-obtained samples and simulated casting (1500 ℃) samples
7. 2D and 3D surface morphologies and roughnesses of the printed surfaces of ceramic cores sintered at different temperatures
8. 2D and 3D surface morphologies of the printed surfaces of ceramic cores sintered at different temperatures
9. 2D and 3D surface morphologies and roughnesses of ceramic cores sintered at different temperatures in printing stacking direction
10. 2D and 3D surface morphologies of ceramic cores sintered at different temperatures in printing stacking direction
Set citation alerts for the article
Please enter your email address
© Copyright 2018-2021 | Chinese Laser Press. All Rights Reserved 沪ICP备15018463号-20