Wenbo ZHONG, Xinsheng ZHAO, Junsheng CHEN, Hao LEI, Jianfeng LI. Optimization of splicing parameters and performance testing between fluoride and silica fibers[J]. Infrared and Laser Engineering, 2024, 53(12): 20240329
- Infrared and Laser Engineering
- Vol. 53, Issue 12, 20240329 (2024)
Fig. 1. Schematic diagram of fusion splicing process
Fig. 2. Fusion splicing effect diagram of silica fiber and fluoride fiber with the same diameter
Fig. 3. (a) Fusion splicing parameter; (b) The fusion splicing effect diagram of large-package-small structure
Fig. 4. Fusion state of fluorine indium fiber under different heating time
Fig. 5. Fusion effect of silica fiber and indium fluoride fiber under different power
Fig. 6. Variation curve of fusion point loss and tensile strength with offset
Fig. 7. Variation curve of fusion point loss and tensile strength with hot push
Fig. 8. Stability of output power of high power MIR-SC
Fig. 9. (a) Fusion splicing effect diagram of 8.2/125 μm silica fiber and 15/250 μm ZBLAN fiber; (b) Fusion splicing effect diagram of 8.2/125 μm silica fiber and 15/200 μm fluorite tellurite fiber
|
Table 1. Testing of fusion point effect
Set citation alerts for the article
Please enter your email address
© Copyright 2018-2021 | Chinese Laser Press. All Rights Reserved 沪ICP备15018463号-20