[1] Rivers M, Quest J and Rudnik R 2017 Comparison of the NASA common research model European transonic wind tunnel test data to NASA national transonic facility test data CEAS Aeronaut. J. 9 307–17

[2] Doshi B, Sarkar B, Sharma R, Sahu A K, Rewatkar P, Sonara D, Saxena Y C, Bhaskar V R, Kumar S and Nagbhushanam S 2006 Design requirement, qualification tests and integration of a thin solid lubricant film of MoS2 for the cold mass support structure of the steady state superconducting tokamak SST-1 Nucl. Fusion 46 S100–5

[3] Gu L, Wang L Q, Li X J and Qi Y L 2002 Research status of cryogenic solid lubrication Tribology 22 314–320

[4] Kalia S and Fu S Y 2013 Polymers at Cryogenic Temperatures (Heidelberg: Springer) p 60

[5] Yu CG,ChenWH,LiangB,WangTM,CuiWY, MaB, Zhao W H,Tao LM and Ma T B 2020 Study on the tribological properties of a self-lubricating spherical plain bearing at a cryogenic and wide temperature range Sci. Sin. Technol. 50 775–85

[6] Gu L, Wang L Q, Zheng D Z and Jia X M 2010 Study on the characteristics of transferred lubricating thin films on ceramic surfaces generated in liquid nitrogen Tribol. Trans. 53 161–8

[7] K.rner C, Kampf D, Poglitsch A, Schubert J, Ruppert U and Schoele M 2014 Development of cryogenic filter wheels for the HERSCHEL photodetector array camera & spectrometer (PACS) Proc. 42th Aerospace Mechanisms Symp. (Baltimore, Maryland) pp 19–30

[8] Wisander D W, Maley C E and Johnson R L 1959 Wear and friction of filled polytetrafluoroethylene compositions in liquid nitrogen ASLE Trans. 2 58–66

[9] Fusaro R L 1990 Self-lubricating polymer composites and polymer transfer film lubrication for space applications Tribol. Int. 23 105–22

[10] Iwabuchi A, Honda T and Tani J 1989 Tribological properties at temperatures of 293, 77 and 4 K in fretting Cryogenics 29 124–31

[11] Iwabuchi A, Arai H, Yoshino Y, Shimizu T, Sugimoto M, Yoshida K, Kashima T and Inui H 1995 Frictional properties of ceramics, MoS2 coated films and polyethylene fibre reinforced plastics at 4.2 K in liquid helium Cryogenics 35 35–40

[12] Fusaro R L 2001 Preventing spacecraft failures due to tribological problems 2001 Annual Meeting (Orlando, Florida, 20–24 May 2001)

[13] Miyoshi K 2007 Solid Lubricants and Coatings for Extreme Environments: State-of-the-Art Survey (Cleveland: Glenn Research Center)

[14] King R F and Tabor D 1953 The effect of temperature on the mechanical properties and the friction of plastics Proc. Phys. Soc. B 66 728–36

[15] Bowden F P and Childs T H C 1969 The friction and deformation of clean metals at very low temperatures Proc. R. Soc. A 312 451–66

[16] Makinson K R and Tabor D 1964 The friction and transfer of polytetrafluoroethylene Proc. R. Soc. A 281 49–61

[17] Bartenev G M and El’kin A I 1967 Nature and mechanism of friction of rubberlike polymers in different physical states Polym. Mech. 3 85–92

[18] Brewe D E, Scibbe H W and Anderson W J 1966 Film-transfer Studies of Seven Ball-bearing Retainer Materials in 60 R (33 K) Hydrogen Gas at 0.8 Million DN Value (Washington: NASA)

[19] Wisander D W, Ludwig L P and Johnson R L 1966 Wear and Friction of Various Polymer Laminates in Liquid Nitrogen and in Liquid Hydrogen (Washington: NASA)

[20] Zaretsky E V, Scibbe H W and Brewe D E 1967 Studies of Low and High Temperature Cage Materials (Washington: NASA)

[21] Scibbe H W 1968 Bearings and Seals for Cryogenic Fluids (Washington: NASA)

[22] Kensley R S and Iwasa Y 1980 Frictional properties of metal insulator surfaces at cryogenic temperatures Cryogenics 20 25–36

[23] Michael P C, Rabinowicz E and Iwasa Y 1991 Friction and wear of polymeric materials at 293,77 and 4.2 K Cryogenics 31 695–704

[24] Gamulya G D, Ostrovskaya Y L, Ostapenko I L, Presnyakova G N and Strel’nitskij V E 1994 Friction behaviour and wear resistance of diamond-like carbon films under cryogenic temperatures Diam. Relat. Mater. 3 1381–4

[25] Iwasa Y, Ashaboglu A F, Rabinowicz E R, Tachibana T and Kobashi K 1997 Cryotribology of diamond and graphite Cryogenics 37 801–5

[26] Ostrovskaya Y L, Strel’nitskij V E, Kuleba V I and Gamulya G D 2001 Friction and wear behaviour of hard and superhard coatings at cryogenic temperatures Tribol. Int. 34 255–63

[27] Yukhno T P, Vvedensky Y V and Sentyurikhina L N 2001 Low temperature investigations on frictional behaviour and wear resistance of solid lubricant coatings Tribol. Int. 34 293–8

[28] Theiler G, Hübner W, Gradt T, Klein P and Friedrich K 2002 Friction and wear of PTFE composites at cryogenic temperatures Tribol. Int. 35 449–58

[29] Theiler G, Hübner W, Gradt T and Klein P 2004 Friction and wear of carbon fibre filled polymer composites at room and low temperatures Materialwiss. Werkstofftech. 35 683–9

[30] Theiler G 2005 PTFE-and PEEK-Matrix Composites for Tribological Applications at Cryogenic Temperatures and in Hydrogen (Berlin: Technische Universit.t Berlin)

[31] Theiler G and Gradt T 2007 Polymer composites for tribological applications in hydrogen environment 2nd Int. Conf. on Hydrogen Safety (San Sebastián)

[32] Theiler G and Gradt T 2007 Tribological behaviour of PEEK composites in vacuum environment Proc. 12th European Space Mechanisms and Tribology Symp. (Liverpool: ESA)

[33] Theiler G and Gradt T 2008 Influence of the temperature on the tribological behaviour of PEEK composites in vacuum environment J. Phys.: Conf. Ser. 100 072040

[34] Gradt T and Theiler G 2009 Influence of solid lubricant fillers on the tribological behaviour of PEEK composites in vacuum Proc. 13th European Space Mechanisms and Tribology Symp. (Vienna, Austria)

[35] Theiler G and Gradt T 2010 Friction and wear of PEEK composites in vacuum environment Wear 269 278–84

[36] Theiler G and Gradt T 2018 Friction and wear behaviour of polymers in liquid hydrogen Cryogenics 93 1–6

[37] Gradt T, B.rner H and Schneider T 2001 Low temperature tribometers and the behaviour of ADLC coatings in cryogenic environment Tribol. Int. 34 225–30

[38] Gradt T and Schneider T 2016 Tribological performance of MoS2 coatings in various environments Lubricants 4 32

[39] McCook N L, Burris D L, Dickrell P L and Sawyer W G 2005 Cryogenic friction behavior of PTFE based solid lubricant composites Tribol. Lett. 20 109–13

[40] Burris D L, Perry S S and Sawyer W G 2007 Macroscopic evidence of thermally activated friction with polytetrafluoroethylene Tribol. Lett. 27 323–8

[41] Zhao X Y, Hamilton M, Sawyer W G and Perry S S 2007 Thermally activated friction Tribol. Lett. 27 113–7

[42] Burris D L 2008 Investigation of the tribological behavior of polytetrafluoroethylene at cryogenic temperatures Tribol. Trans. 51 92–100

[43] Hamilton M A, Alvarez L A, Mauntler N A, Argibay N, Colbert R, Burris D L, Muratore C, Voevodin A A, Perry S S and Sawyer W G 2008 A possible link between macroscopic wear and temperature dependent friction behaviors of MoS2 coatings Tribol. Lett. 32 91–98

[44] Colbert R S and Sawyer W G 2010 Thermal dependence of the wear of molybdenum disulphide coatings Wear 269 719–23

[45] Barry P R, Chiu P Y, Perry S S, Sawyer W G, Sinnott S B and Phillpot S R 2015 Effect of temperature on the friction and wear of PTFE by atomic-level simulation Tribol. Lett. 58 50

[46] Babuska T F, Pitenis A A, Jones M R, Nation B L, Sawyer W G and Argibay N 2016 Temperature-dependent friction and wear behavior of PTFE and MoS2 Tribol. Lett. 63 15

[47] Burton J C, Taborek P and Rutledge J E 2006 Temperature dependence of friction under cryogenic conditions in vacuum Tribol. Lett. 23 131–7

[48] Aggleton M, Burton J C and Taborek P 2009 Cryogenic vacuum tribology of diamond and diamond-like carbon films J. Appl. Phys. 106 013504

[49] Dunckle C G, Aggleton M, Glassman J and Taborek P 2011 Friction of molybdenum disulfide–titanium films under cryogenic vacuum conditions Tribol. Int. 44 1819–26

[50] CuiWY et al 2020 Role of transfer film formation on the tribological properties of polymeric composite materials and spherical plain bearing at low temperatures Tribol. Int. 152 106569

[51] YinX,JinJ,ChenXC,MaTBandZhangCH2021A new pathway for superlubricity in a multilayered MoS2–Ag film under cryogenic environment Nano Lett. 21 10165–71

[52] Xu Q, Zhang J, Li X, van Duin D M, Hu Y Z, Van DuinA C T and MaT B 2022How polytetrafluoroethylene lubricates iron: an atomistic view by reactive molecular dynamics ACS Appl. Mater. Interfaces 14 6239–50

[53] Nosaka M, Kikuchi M, Kawai N and Kikuyama H 2000 Effects of iron fluoride layer on durability of cryogenic high-speed ball bearings for rocket turbopumps Tribol. Trans. 43 163–74

[54] Obara S, Sasaki A, Haraguchi M, Imagawa K, Kawashima N and Nishimura M 2003 Evaluation tests of industrial vacuum bearings for space use Tribotest 10 117–34

[55] Iwaki M, Le Mogne T, Fontaine J, Martin J M, Watanabe S and Noshiro J 2005 Superlow friction of WS2 coatings in ultrahigh vacuum at low temperature Proc. World Tribology Congress III (Washington: ASME)

[56] Nosaka M 2011 Cryogenic tribology of high-speed bearings and shaft seals in liquid hydrogen Tribol. Online 6 133–41

[57] Martin J M, Liang H, Le Mogne T and Malroux M 2003 Low-temperature friction in the XPS analytical ultrahigh vacuum tribotester Tribol. Lett. 14 25–31

[58] Descartes S, Godeau C and Berthier Y 2015 Friction and lifetime of a contact lubricated by a solid third body formed from an MoS1.6 coating at low temperature Wear 330–331 478–89

[59] Xu G H, Lee J H, Liang H and Georing D 2004 Tribological properties of solid-lubricating coatings on cylinder bore at low temperature Wear 257 59–65

[60] Xu G H, Liang H, Woodford J B and Johnson J A 2005 Temperature dependence of diamondlike carbon film tribological characteristics J. Am. Ceram. Soc. 88 3110–5

[61] Gu L, Wang L Q, Zheng D Z and Li B S 2007 Friction and wear behavior of Si3N4/9Cr18 pairs in liquid nitrogen Lubr. Eng. 32 27–50

[62] Jia X M, Wang L Q, Ying L X and Gu L 2007 Friction and wear behavior of PTFE-based composites under dry sliding and in liquid nitrogen Tribology 27 181–6

[63] Wang L Q, Jia X M, Cui L and Chen G C 2008 Effect of aramid fiber and ZnO nanoparticles on friction and wear of PTFE composites in dry and LN2 conditions Tribol. Trans. 52 59–65

[64] Shang Q 2009 Study on the Tribological Properties of Ptfe-based Composits Meterials under Vacuum and Cryogenic Conditions (Harbin: Harbin Institute of Technology)

[65] Tian X and Qu J J 2010 Study on wear properties of rotor friction material for ultrasonic motor in vacuum and low temperature Proc. 7th Annual Symp. of CSA-CDSET (Deep Space Exploration Technology Professional Committee of China Aerospace Society)(Harbin)

[66] Qu J J, Zhang Y H, Tian X and Li J B 2015 Wear behavior of filled polymers for ultrasonic motor in vacuum environments Wear 322–323 108–16

[67] Zhao W D, Zhang Z Q, Geng D B, Xiong Y F and Wang W H 2003 Progress of research on cryogenic polymer composites Aerosp. Mater. Technol. 33 21–25

[68] Wang L P and Liu X F 2013 Tribological behavior of DLC/IL solid–liquid lubricating coatings in a high-vacuum condition with alternating high and low temperatures Wear 304 13–19

[69] Yang J F, Jiang Y, Hardell J, Prakash B and Fang Q F 2013 Influence of service temperature on tribological characteristics of self-lubricant coatings: a review Front. Mater. Sci. 7 28–39

[70] Wang Q H, Zheng F and Wang T M 2016 Tribological properties of polymers PI, PTFE and PEEK at cryogenic temperature in vacuum Cryogenics 75 19–25

[71] Sliney H E 1979 Wide temperature spectrum self-lubricating coatings prepared by plasma spraying Thin Solid Films 64 211–7

[72] Gasparotto M, Elio F, Heinemann B, Jaksic N, Mendelevitch B, Simon-Weidner J and Streibl B 2005 The WENDELSTEIN 7-X mechanical structure support elements: design and tests Fusion Eng. Des. 74 161–5

[73] Koch F, Nocentini R, Heinemann B, Lindig S, Junghanns P and Bolt H 2007 MoS2 coatings for the narrow support elements of the W-7X nonplanar coils Fusion Eng. Des. 82 1614–20

[74] Gould S G and Roberts E W 1989 The in-vacuo torque performance of dry-lubricated ball bearings at cryogenic temperatures Proc. 23rd Aerospace Mechanisms Symp. (Serbia: NASA) pp 319–33

[75] Nosaka M and Kato T 2013 Cryogenic tribology in high-speed bearings and shaft seals of rocket turbopumps Tribology—Fundamentals and Advancements ed J Gegner (London: Intechopen)

[76] Hampson M R, Roberts E W, Watters R B and Buttery M 2013 Speed dependence of bearing torque—anomalous effects with grease lubrication Proc. 15th European Space Mechanisms & Tribology Symp. ESMATS (Noordwijk, The Netherlands)

[77] Bozet J L 1993 Type of wear for the pair Ti6A14V/PCTFE in ambient air and in liquid nitrogen Wear 162–164 1025–8

[78] Gradt T, Schneider T, Hübner W and B.rner H 1998 Friction and wear at low temperatures Int. J. Hydrog. Energy 23 397–403

[79] Oyamada T, Ono M, Miura H and Kuwano T 2013 Effect of gas environment on friction behavior and tribofilm formation of PEEK/carbon fiber composite Tribol. Trans. 56 607–14

[80] Lan P X, Gheisari R, Meyer J L and Polycarpou A A 2018 Tribological performance of aromatic thermosetting polyester (ATSP) coatings under cryogenic conditions Wear 398–399 47–55

[81] HuC,QiHM,SongJF, ZhaoG,Yu JX,ZhangYF, HeHT and Lai J P 2021 Exploration on the tribological mechanisms of polyimide with different molecular structures in different temperatures Appl. Surf. Sci. 560 150051

[82] Bozet J L 2001 Modelling of friction and wear for designing cryogenic valves Tribol. Int. 34 207–15

[83] Hübner W, Gradt T, Schneider T and B.rner H 1998 Tribological behaviour of materials at cryogenic temperatures Wear 216 150–9

[84] Theiler G, Harsha A P and Gradt T 2019 On the sliding wear behavior of PAEK composites in vacuum environment J. Tribol. 141 044502

[85] Curry J F, Babuska T F, Brumbach M T and Argibay N 2016 Temperature-dependent friction and wear of MoS2/Sb2O3/Au nanocomposites Tribol. Lett. 64 18

[86] Lince J, Kim H I, Kirsch J J and Didziulis S V 2016 Low-temperature friction variation of MoS2-based lubricants Proc. 71st STLE Annual Meeting & Exhibition (Las Vegas)

[87] Rtec Instruments 2021 Vacuum tribometer (available at: https://rtec-instruments.com/tribometer/vacuum-tribometer/)

[88] Ostrovskaya Y L, Yukhno T P, Gamulya G D, Vvedenskij Y V and Kuleba V I 2001 Low temperature tribology at the B Verkin Institute for low temperature physics & engineering (historical review) Tribol. Int. 34 265–76

[89] Zhu J F, Yang G L, Cui H F and Zhang Q X 2020. A high and low temperature vacuum friction and wear tester C.N. Patent No. CN201922272888.5

[90] Yu Q Y, Chen X C, Zhang C H and Luo J B 2020 Friction test equipment for vacuum cryogenic temperature environment C.N. Patent No. CN202010331631.7

[91] CuiWY, HongCH,MaQS,ZhaoJXandMaTB2022 Cryogenic friction and wear trio-test system C.N. Patent No. CN202210645660.X

[92] Qin H F, Liu S B and Li H 2021 Technical characteristic analysis and calibration of strain type force transducer in complex working conditions Meas. Sens. 18 100071

[93] Wang C, Mi P, Tian Z B and Yi G Q 2020 Study on temperature characteristics and correction of strain gauge balance in actual airflow environment Aerosp. Sci. Technol. 106 106201

[94] Ewald B F R 2000 Multi-component force balances for conventional and cryogenic wind tunnels Meas. Sci. Technol. 11 R81–R94

[95] Paulmier D, Zaidi H, Nery H, Huu T L and Mathia T 1993 Tribological behaviour of diamond-like coatings: effect of active gases in atomic and molecular states Surf. Coat. Technol. 62 570–6

[96] Barros-Bouchet M I D, Martin J M, Philippon D, Matta C, Mogne T L and Boehm M 2015 Modelling tribochemical reactions of lubricants in the UHV analytical tribometer Tribol. Online 10 21–26

[97] Boehm M, Le Mogne T, Martin J M, Dunlop H M and Hauret G 1999 Experimental modelling of boundary lubrication using an ultra high vacuum tribometer Tribol. Ser. 36 323–31

[98] Burton R A, Russel J A and Ku P M 1962 Metallic friction at cryogenic temperature Wear 5 60–68

[99] Liu H T, Ji H M and Wang X M 2013 Tribological properties of ultra-high molecular weight polyethylene at ultra-low temperature Cryogenics 58 1–4

[100] GuDP, DuanCS,Fan BL,ChenSWandYangYL2016 Tribological properties of hybrid PTFE/Kevlar fabric composite in vacuum Tribol. Int. 103 423–31

[101] Prajapati A K, Omrani E, Menezes P L and Rohatgi P K 2018 Fundamentals of solid lubricants Self-Lubricating Composites ed P L Menezes, P K Rohatgi and E Omrani (Berlin: Springer) pp 1–32

[102] Chen X C, Zhang C H, Kato T, Yang X A, Wu S D, Wang R, Nosaka M and Luo J B 2017 Evolution of tribo-induced interfacial nanostructures governing superlubricity in a-C: h and a-C: h: si films Nat. Commun. 8 1675

[103] Chen X C and Li J J 2020 Superlubricity of carbon nanostructures Carbon 158 1–23

[104] Wang K, Zhang J, Ma T B, Liu Y M, Song A S, Chen X C, Hu Y Z, Carpick R W and Luo J B 2021 Unraveling the friction evolution mechanism of diamond-like carbon film during nanoscale running-in process toward superlubricity Small 17 2005607

[105] Singh H, Mutyala K C, Evans R D and Doll G L 2015 An investigation of material and tribological properties of Sb2O3/Au-doped MoS2 solid lubricant films under sliding and rolling contact in different environments Surf. Coat. Technol. 284 281–9

[106] Gu L, Wang L, Jin Y and Li X 2003 Fatigue behavior of hybrid ceramic ball bearings in liquid nitrogen Tribol. Trans. 46 494–8

[107] Basu B and Kalin M 2011 Case study: sliding wear of self-mated tetragonal zirconia ceramics in liquid nitrogen Tribology of Ceramics and Composites: A Materials Science Perspective ed B Basu and M Kalin (Hoboken: Wiley)

[108] Ye JX,WeiJ,ZengJ,AlamKI,SunW, LiuXJ,LiuKand Burris D L 2020 Interfacial gradient and its role in ultralow wear sliding J. Phys. Chem. C 124 6188–96

[109] Pooley C M and Tabor D 1972 Transfer of PTFE and related polymers in a sliding experiment Nat. Phys. Sci. 237 88–90

[110] Lauer J L, Bunting B G and Jones W R 1988 Investigation of frictional transfer films of PTFE by infrared emission spectroscopy and phase-locked ellipsometry Tribol. Trans. 31 282–8

[111] Jintang G 2000 Tribochemical effects in formation of polymer transfer film Wear 245 100–6

[112] Haidar D R, Alam K I and Burris D L 2018 Tribological insensitivity of an ultralow-wear poly(etheretherketone)–polytetrafluoroethylene polymer blend to changes in environmental moisture J. Phys. Chem. C 122 5518–24

[113] Campbell K L, Sidebottom M A, Atkinson C C, Babuska T F, Kolanovic C A, Boulden B J, Junk C P and Krick B A 2019 Ultralow wear PTFE-based polymer composites—the role of water and tribochemistry Macromolecules 52 5268–77

[114] Friedrich K 2018 Polymer composites for tribological applications Adv. Ind. Eng. Polym. Res. 1 3–39

[115] Bowden F P and Tabor D 1950 The Friction and Lubrication of Solids (Oxford: Clarendon) p 312

[116] Czichos H 1986 Introduction to friction and wear Compos. Mater. Ser. 1 1–23

[117] Song J and Ehrenstein G W 1993 Friction and wear of self-reinforced thermoplastics Compos. Mater. Ser. 8 19–63

[118] Sun W, Liu X J, Liu K, Wang W and Ye J X 2020 Ultralow wear PTFE composites filled with beryllia and germania particles Wear 450–451 203270

[119] Qi H M, Zhang G, Chang L, Zhao F Y, Wang T M and Wang Q H 2017 Ultralow friction and wear of polymer composites under extreme unlubricated sliding conditions Adv. Mater. Interfaces 4 1601171

[120] Onodera T, Nunoshige J, Kawasaki K, Adachi K, Kurihara K and Kubo M 2017 Structure and function of transfer film formed from PTFE/PEEK polymer blend J. Phys. Chem. C 121 14589–96

[121] Ye J X, Burris D L and Xie T 2016 A review of transfer films and their role in ultra-low-wear sliding of polymers Lubricants 4 4

[122] Sidebottom M A, Junk C P, Salerno H L S, Burch H E, Blackman G S and Krick B A 2018 Wear-induced microstructural and chemical changes in poly

     [tetrafluoroethylene-co-(perfluoroalkyl vinyl ether)](PFA) Macromolecules 51 9700–9

[123] Pitenis A A, Harris K L, Junk C P, Blackman G S, Sawyer W G and Krick B A 2015 Ultralow wear PTFE and alumina composites: it is all about tribochemistry Tribol. Lett. 57 4

[124] Khare H S, Moore A C, Haidar D R, Gong L, Ye J, Rabolt J F and Burris D L 2015 Interrelated effects of temperature and environment on wear and tribochemistry of an ultralow wear PTFE composite J. Phys. Chem. C 119 16518–27

[125] Harris K L, Curry J F, Pitenis A A, Rowe K G, Sidebottom M A, Sawyer W G and Krick B A 2015 Wear debris mobility, aligned surface roughness, and the low wear behavior of filled polytetrafluoroethylene Tribol. Lett. 60 2

[126] Shen J T, Pei Y T and De Hosson J T M 2014 Structural changes in polytetrafluoroethylene molecular chains upon sliding against steel J. Mater. Sci. 49 1484–93

[127] Zhao X Y, Phillpot S R, Sawyer W G, Sinnott S B and Perry S S 2009 Transition from thermal to athermal friction under cryogenic conditions Phys. Rev. Lett. 102 186102

[128] Krylov S Y, Jinesh K B, Valk H, Dienwiebel M and Frenken J W M 2005 Thermally induced suppression of friction at the atomic scale Phys. Rev. E 71 065101

[129] Blanchet T A and Kennedy F E 1992 Sliding wear mechanism of polytetrafluoroethylene (PTFE) and PTFE composites Wear 153 229–43

[130] Green J and Quest J 2011 A short history of the European transonic wind tunnel ETW Prog. Aerosp. Sci. 47 319–68

[131] Niu R J, Zhang J H, Ni Y G and Deng S 2018 Development of high performance self-lubricating spherical plain bearings and their friction and wear properties Proc. 8th Int. Conf. on Manufacturing Science and Engineering pp 169–73

[132] Lu J J, Qiu M and Li Y C 2016 Wear models and mechanical analysis of PTFE/Kevlar fabric woven liners used in radial spherical plain bearings Wear 364–365 57–72

[133] Qiu M, Tian K W and Zhang Y T 2021 Effect of ambient temperature on the formation mechanism of PTFE liner transfer film of spherical plain bearings Mech. Ind. 22 11

[134] KimBC,ParkDC,KimHSandLeeDG2006 Development of composite spherical bearing Compos. Struct. 75 231–40

[135] Shimizu T, Katsuma H, Ito S, Sawada Y and Muro H 1982 Self-lubricating spherical plain bearings for heavy duty applications Proc. 33rd Annual Earthmoving Industry Conf. (Warrendale: SAE) (https://doi.org/10.4271/820623)

[136] QiuM,YangZP, LuJJ,LiYCandZhouDW2017 Influence of step load on tribological properties of self-lubricating radial spherical plain bearings with PTFE fabric liner Tribol. Int. 113 344–53

[137] Qiu M, Miao Y W, Li Y C and Lu J J 2015 Film-forming mechanisms for self-lubricating radial spherical plain bearings with hybrid PTFE/aramid fabric liners modified by ultrasonic Tribol. Int. 87 132–8

[138] Sliney H E and Johnson R L 1972 Graphite Fiber Polyimide Composites for Spherical Bearings to 340 .C (650.F) (Washington: NASA)

[139] Sliney H E and Jacobson T P 1978 Some Effects of Composition on Friction and Wear of Graphite-Fiber-Reinforced Polyimide Liners in Plain Spherical Bearings (Washington: NASA)

[140] Hu Z Q, Li W, Yang Y L and Qi X W 2012 Spherical plain bearing life tester under high and low temperature environment C.N. Patent No. CN201210556215.2

[141] CuiWY, MaTY, ChenXC,HuYZandLuoJB2021 Cryogenic and wide temperature range spherical plain bearing tribotester C.N. Patent No. CN201911095732.2

[142] CuiWY, MaTY, ChenXC,HuYZandLuoJB2021 Cryogenic and wide temperature range spherical plain bearing tribotester and the measurement method of the spherical plain bearing C.N. Patent No. CN201911105699.7

[143] CuiWY, Yu CG,HongCH,MaTB,ChenXC,HuYZ and Luo J B 2020 Cryogenic and wide temperature range spherical plain bearing tribotester as well as the load and motion simulation system C.N. Patent No. CN201911095002.2

[144] CuiWY, MaTB,ChenXC,HuYZandLuoJB2021 Cryogenic and wide temperature range spherical plain bearing tribotester and the observation method of the spherical plain bearing C.N. Patent No. CN201911094997.0

[145] Gustafson J C 1983 Control of Large Thermal Distortions in a Cryogenic Wind Tunnel (Hampton: NASA) pp 120–41

[146] LaiH,ZhuCJ,ChenWH,LiaoDXandSunDW2022 Key technology for mechanical design in large-scale cryogenic wind tunnel J. Exp. Fluid Mech. 36 19–26

[147] CuiWY, XuMK,Tao LM,WangTM,Yu CG,LiangB andMa T B2023 In-situ observation of transfer film formation and evolution for the fabric composite lubricated spherical plain bearing at cryogenic and wide temperature range Appl. Surf. Sci. 612 155946

[148] Ma Y S, Hu J F and Dong X C 2022 A review of physical vapor deposition coatings for rolling bearings Proc. Inst. Mech. Eng. J. 236 786–803

[149] David K, Petr S, Jakub C, Petr V, Marian P and Ivan K 2020 Comparison of grease and solid lubrication of rolling bearings under small-stroke reciprocation for space applications Tribol. Ind. 42 146–58

[150] SKF 2018 Rolling bearings catalogue PUB BU/P1 17000/1 EN (SKF Group) pp 1006–10

[151] Dahiwal R, Thielen S and Sauer B 2020 Modeling and simulation of cage wear in solid-lubricated rolling bearings Tribol. Online 15 25–35

[152] Scibbe H W and Anderson W J 1962 Evaluation of ball-bearing performance in liquid hydrogen at DN values to 1.6 million ASLE Trans. 5 220–32

[153] MiaoXS,HuM,LiAM,WangDS,WengLJ,LiXYand Zhang G T 2018 Investigation on the lubricity of self-lubricating ball bearings for cryogenic turbine pump Tribol. Int. 121 45–53

[154] Gibson H, Thom R, Moore C and Haluck D 2010 History of space shuttle main engine turbopump bearing testing at the Marshall space flight center 57th JANNAF Joint Propulsion Meeting(Colorado: NASA)

[155] Jones G S and Marsh J M 2016 James Webb space telescope integration & test AIAA SPACE (California: AIAA SPACE Forum) (https://doi.org/10.2514/6.2016-5251)

[156] Bartschi B Y, Morse D E and Woolston T L 1996 The spatial infrared imaging telescope III Johns Hopkins APL Tech. Dig. 17 215–25

[157] Schade W C 2008 Cryogenic focus mechanism for the spitzer space telescope Proc. 39th Aerospace Mechanisms Symp. (Huntsville: NASA Marshall Space Flight Center)

[158] Schwalm M, Akerstrom A, Barry M, Guregian J, Larsen M, Laquidara P, Regan J and Ugolini V 2010 Hardware results for the wide-field infrared survey explorer (WISE) telescope and scanner Proc. SPIE 7731 77310Y

[159] de Jonge C, Eggens M, Nieuwenhuizen A C T, Detrain A, Smit H and Dieleman P 2012 Cryogenic actuator testing for the SAFARI ground calibration setup Proc. SPIE 8450 84504D

[160] Werner M W 2012 The spitzer space telescope Opt. Eng. 51 011008

[161] Barriere J C et al 2015 Cryomechanism: a cryogenic rotating actuator Proc. SPIE 8863 886305

[162] National Aeronautics and Space Administration (NASA) 2022 James Webb space telescope (available at: https:// jwst.nasa.gov/index.html)

[163] Evans J W, Barto A, Gallagher B, Finley P, Samuel M and Burke J 2013 Analysis and life testing for design of cryogenic bearing assemblies on the James Webb space telescope optical telescope element Proc. ASME 2013 Int. Mechanical Engineering Congress and Exposition (San Diego, CA: ASME) (https://doi.org/10.1115/ IMECE2013-62988)

[164] Barto A, Acton D S, Finley P, Gallagher B, Hardy B, Knight J S and Lightsey P 2012 Actuator usage and fault tolerance of the James Webb space telescope optical element mirror actuators Proc. SPIE 8442 84422I

[165] Nella J et al 2004 James Webb space telescope (JWST) observatory architecture and performance Space 2004 Conf. and Exhibit (San Diego, CA: AAAI) (https://doi. org/10.1117/12.548928)

[166] Lemke D et al 2006 Cryogenic filter-and spectrometer wheels for the mid infrared instrument (MIRI) of the James Webb space telescope (JWST) Proc. SPIE 6273 627324

[167] Aldridge D, Gentilhomme M, Gibson A, Cameron P, McColgan A, Dhanji Z, Lambros S and Anderson M 2015 Cryogenic motor enhancement for the NIRISS instrument on the James Webb space telescope Proc. 16th European Space Mechanisms and Tribology Symp. 2015 (Bilbao: ESA Special Publication)

[168] Ellenrieder M M, Weidlich K, Gro. T, Fischer M, Kolb A, Wieland H U and Trunz M 2009 Tribology aspects of the NIRSPEC filter and grating wheel mechanisms Proc. 13th European Space Mechanisms and Tribology Symp. ESMATS (Vienna, Austria)

[169] Weidlich K et al 2008 High-precision cryogenic wheel mechanisms for the JWST NIRSPEC instrument Proc. SPIE 7018 701821

[170] Weidlich K et al 2006 The grating and filter wheels for the JWST NIRSPEC instrument Proc. SPIE 6273 627323

[171] Radisavljevic B, Radenovic A, Brivio J, Giacometti V and Kis A 2011 Single-layer MoS2 transistors Nat. Nanotechnol. 6 147–50

[172] Dolgov A, Lopaev D, Lee C J, Zoethout E, Medvedev V, Yakushev O and Bijkerk F 2015 Characterization of carbon contamination under ion and hot atom bombardment in a tin-plasma extreme ultraviolet light source Appl. Surf. Sci. 353 708–13

[173] Wright G S et al 2015 The mid-infrared instrument for the James Webb Space Telescope, II: design and build Publ. Astron. Soc. Pac. 127 595–611

[174] Krantz T and Cameron Z 2019 Development of pericyclic gearbox for roving application Proc. ASME Int. Design Engineering Technical Conf. (Anaheim)

[175] Choe B, Lee J, Jeon D and Lee Y 2019 Experimental study on dynamic behavior of ball bearing cage in cryogenic environments, part I: effects of cage guidance and pocket clearances Mech. Syst. Signal Process. 115 545–69

[176] Choe B, Kwak W, Jeon D and Lee Y 2019 Experimental study on dynamic behavior of ball bearing cage in cryogenic environments, part II: effects of cage mass imbalance Mech. Syst. Signal Process. 116 25–39

[177] Redmond M, Kempenaar J and Novak K 2017 Mars 2020 mobility actuator thermal testing and model correlation Proc. 47th Int. Conf. on Environmental Systems (Charleston: ICES)

[178] Novak K, Redmond M, Kempenaar J, Farias E, Singh K and Lee C J 2018 Thermal operability improvements for the Mars 2020 rover surface mission Proc. 48th Int. Conf. on Environmental Systems ICES (Albuquerque)

[179] Fleischner R 2003 Concurrent actuator development for the mars exploration rover instrument deployment device Proc. 10th European Space Mechanisms and Tribology Symp. (San Sebastián: ESA) pp 255–62

[180] Novak K, Liu Y M, Lee C J and Hendricks S 2010 Mars science laboratory rover actuator thermal design Proc. 40th Int. Conf. on Environmental Systems (Barcelona: AIAA) p 6196

[181] Novak K, Redmond M, Kempenaar J, Lee C J and Daimaru T 2019 Thermal design of the sample handling assembly in the sampling and caching subsystem on the Mars 2020 rover Proc. 49th Int. Conf. on Environmental Systems (Boston, MA: ICES) p 28

[182] Nosaka M, Oike M, Kikuchi M and Mayumi T 1997 Tribo-characteristics of cryogenic hybrid ceramic ball bearings for rocket turbopumps: self-lubricating performance. Tribol. Trans. 40 21–30

[183] Wu YH et al 2020 Service performance testing device of all ceramic roller bearing under cryogenic temperature and wide temperature range condition C.N. Patent No. CN202010756966.3

[184] Chen H Z, Cui W Y and Ma T B 2022 Cryogenic and vacuum bearing tribotester C.N. Patent No. CN202210778383.X

[185] Henein S, Spanoudakis P, Schwab P, Giriens L, Lisowski L, Onillon E and Myklebust L I 2004 Mechanical slit mask mechanism for the James Webb space telescope spectrometer Proc. SPIE 5487 765–76

[186] Mondello G, Di Giampietro M and Suetta E 2007 The cryogenic refocusing mechanism of NIRSPEC Proc. 12th Euro. Space Mechanisms & Tribology Symp. ESMATS (Liverpool, UK)

[187] Kim D, Hong M, Park J and Lee S Y 2013 Study for the development of a main oxidizer shut-off valve for liquid rocket engines J. Korean Soc. Propul. Eng. 17 113–9

[188] Song F Z, Yang Z H, Zhao G, Wang Q H, Zhang X R and Wang T M 2017 Tribological performance of filled PTFE-based friction material for ultrasonic motor under different temperature and vacuum degrees J. Appl. Polym. Sci. 134 45358

[189] Ni J and Zhu Z 2000 Design of a linear piezomotor with ultra-high stiffness and nanoprecision IEEE/ASME Trans. Mech. 5 441–3

[190] Henderson D A and Fasick J C 1998 Inchworm motor developments for the next-generation space telescope (NGST) Proc. SPIE 3429 252–6

[191] Yamaguchi D, Kanda T and Suzumori K 2012 An ultrasonic motor for cryogenic temperature using bolt-clamped Langevin-type transducer Sens. Actuators A 184 134–40

[192] Bree B V, Janssen H, Paalvast S and Albers R 2012 Cryogenic actuator for subnanometer positioning Proc. SPIE 8450 1398–404