[1] P F MANICONE, IOMMETTI P ROSSI, L RAFFAELLI. An overview of zirconia ceramics: basic properties and clinical applications.
[2] C HUNT, J K ALLEMEIER, D DRISCOLL et al. Molybdenum oxide and nickel nitrate as cooperative sintering aids for yttria- stabilized zirconia.
[3] R M BATISTA, E N S MUCCILLO. Structure, microstructure and electrical conductivity of 8YSZ containing NiO..
[4] L WEI, J ZHANG, F YU et al. A novel fabrication of yttria- stabilized-zirconia dense electrolyte for solid oxide fuel cells by 3D printing technique.
[5] S DEY, J W DRAZIN, Y WANG et al. Radiation tolerance of nanocrystalline ceramics: insights from yttria stabilized zirconia.
[6] H M SICKAFUS, T HARTMANN, K YASUDA et al. Radiation damage effects in zirconia.
[7] V SVITLYK, S WEISS, C HENNIG. Stability of doped zirconia under extreme conditions: toward long-term and secure storage of radioactive waste.
[8] A E KURAKHMEDOV, M ALIN, A M TEMIR et al. Study of the effect of doping ZrO2 ceramics with MgO to increase the resistance to polymorphic transformations under the action of irradiation.
[9] J WU, O YOSHIAKI. Improved single pass core design for high temperature super LWR..
[10] F BARRETT, X HUANG, D GUZONAS. Characterization of TiO2-doped yttria-stabilized zirconia (YSZ) for supercritical water-cooled reactor insulator application.
[11] S GUO, D XU, Y LIANG et al. Corrosion characterization of ZrO2 and TiO2 ceramic coatings via air plasma spraying on 316 stainless steel in oxygenated sub- and supercritical water.
[12] J Y PARK, I H KIM, Y I JUNG et al. Long-term corrosion behavior of CVD SiC in 360 ℃ water and 400 ℃ steam.
[13] A NOWICKA, H F EL-MAGHRABY, ?VAN?áRKOVáA et al. Corrosion and low temperature degradation of 3Y-TZP dental ceramics under acidic conditions.
[14] D RT5ZHU, J LIANG, X ZHANG. Progress on hydrothermal stability of dental zirconia ceramics.
[15] K FRANGAN, J CHEVALIER, F ZHANG et al. Is a zirconia dental implant safe when it is available on the market?.
[16] C SUN, R HUI, W QU et al. Progress in corrosion resistant materials for supercritical water reactors.
[17] K CHEN, D SEO, P CANTEENWALLA et al. The effect of high-temperature water vapour on degradation and failure of hot section components of gas turbine engines.
[18] A SEBERT-TIMMER, L BICHLER. Degradation of SPS-fabricated YSZ and Nd2O3-YSZ ceramics in supercritical water.
[20] M HERRMANN, H KLEMM. Corrosion of ceramic material, 413(2014).
[21] A SIEBERT-TIMMER, L BICHLER, K MONDAL. Degradation of spark plasma sintered yttria stabilized zirconia (YSZ) and CeO2-YSZ ceramics in supercritical water.
[22] M GHATEE, M H SHARIAT, J T S IRVINE. Investigation of electrical and mechanical properties of 3YSZ/8YSZ composite electrolytes.
[23] C G KONTOYANNIS, M ORKUALA. Quantitative determination of the cubic, tetragonal and monoclinic phases in partially stabilized zirconia by Raman spectroscopy.
[24] A A SOBOL, Y K VORONKO. Stress-induced cubic-tetragonal transformation in partially stabilized ZrO2: Raman spectroscopy study.
[25] T TAKEUCHI, I KONDOH, N TAMARI et al. Improvement of mechanical strength of 8 mol% yttria-stabilized zirconia ceramics by spark-plasma sintering.
[26] G S FRANKEL, J D VIENNA, J LIAN et al. A comparative review of the aqueous corrosion of glasses, crystalline ceramics, and metals.
[27] M HERRMANN. Corrosion of ceramics in aqueous environments, 921(2021).
[28] X CHEN, W FAN, Z ZHANG. Thermos-physical properties and corrosion behaviors of monoclinic Gd4Al2O9 ceramic exposed to pressurized water at 360 ℃.