[1] Heck M J R, Bauters J, Davenport M, et al. Hybrid silicon photonic integrated circuit technology[J]. IEEE J Sel Topics Quantum Electronics, 2013, 19(4): 6100117.
[2] Paolo Bettotti. Hybrid materials for integrated photonics[J]. Advances in Optics, 2014,2014 (11): 1-24.
[3] Xing Dai, Binh-Minh Nguyen, Yoontae Hwang, et al. Novel heterogeneous integration technology of III-V layers and InGaAs finFETs to silicon[J]. Advanced Functional Materials, 2014, 24(28): 4420-4426.
[4] Luo Xu, Zou Yan, Jiang Menghua, et al. Fabrication and characteristics of quasi-phase-matched GaAs crystal for mid-infrared laser [J]. Infrared and Laser Engineering, 2014, 43(2): 490-492. (in Chinese)
[5] Ye Lezhi, Tang Liang, Liu Ziyang. Summary of flip chip bonding technology and equipment[J]. Equipment for Electronic Products Manufacturing, 2014(11): 1-5. (in Chinese)
[6] Sabarni Palitl, Jeremy Kirch, Luke Mawst, et al. Thermal characteristics of III/V thin film edge emitting lasers on silicon[J]. International Journal of Microwave and Optical Technology, 2010, 5(6): 483-487.
[7] Xiao Jing, Ritesh Ray Chaudhuri, Sang-Woo Seo. Fluidic assisted thin-film device heterogeneous integration: Surface tension as driving force and magnetic as guiding force [J]. Optics Communications, 2015, 353(15): 171-177.
[8] Song F C, Xiao J, Xie A J, et al. A polymer waveguide grating sensor integrated with a thin-film photodetector[J]. Journal of Optics, 2014, 16(111): 15503.
[9] Shen Po-Kuan, Chen Chin-Ta, Chen Ruei-Hung, et al. Chip-level optical interconnects using polymer waveguide integrated with laser/PD on silicon[J]. Photonics Technology Letters, 2015, 27(13): 1359-1362.
[10] Mastrangeli M, Ruythooren W, Celis J P, et al. Challenges for capillary self-assembly of microsystems[J]. IEEE Trans Compon Packag Manuf Technol, 2011, 1(1): 133-149.
[11] Sariola Veikko, Jaaskelaainen M, Quan Zhou. Hybrid microassembly combining robotics and water droplet self-alignment[J]. Robotics, 2010, 26(6): 965-977.
[12] Xiao Jing, Song Fuchuan, Sang-Woo Seo. Surface-tension driven heterogeneous integration of thin film photonic devices using micro-contact printing for multi-material photonic integrated circuits[J]. Journal of Lightwave Technology, 2011, 29(10): 1578-1582.
[13] Wu Yiping, Wang Jifan, Zhang Jinsong, et al. A novel micro-component assembly technology-fluidic self-assembly[J]. Equipment for Electronic Products Manufacturing, 2005, 34(9): 12-17. (in Chinese)
[14] Karl F Bohringer, Uthara Srinivasan, Roger T H. Modeling of fluidic forces and binding sites for fluidic self-assembly[C]//IEEE Conference on Micro Electro Mechanical Systems(MEMS), 2001: 369-374.
[15] Shiga S, Wang D F, Ishida T, et al. Crescent shaped alignment marks applicable to self-alignment of micro-parts with and without positive and negative poles[C]//Integration and Packaging of MEMS/MOEMS (DTIP), 2011: 180-183.
[16] Geng Yongyou, Deng Changmeng, Wu Yiqun. Recent progress of extreme ultraviolet resists[J]. Infrared and Laser Engineering, 2014, 43(6): 1850-1856. (in Chinese)
[17] Liu Tao, Li Zhishan, Jiang Zhi, et al. Fabrication process of organic polymer optical waveguide[J]. Laser & Infrared, 2015, 45(6): 599-604. (in Chinese)
[18] Xu Min, Yin Zhouping, Ding Han, et al. Modeling and simulation of fluidic self-assembly system based on capillary force[J]. China Mechanical Engineering, 2004, 15(2): 139-143. (in Chinese)
