Research Progress of Ceramic Matrix Composites Prepared by Improved Reactive Melt Infiltration through Ceramization of Porous Carbon Matrix

Rida ZHAO; Sufang TANG

doi:10.15541/jim20230608

[3] Y JIANG, C L HU, B LIANG et al. Cyclic ablation resistance at 2300 ℃ of (Hf_0.4Zr_0.4Ta_0.2)B₂-SiC-Si coating for C/SiC composites prepared by SiC-assisted reactive infiltration of silicon. Surface & Coatings Technology, 451: 129072(2022).

[4] P J TANG, C L HU, S Y PANG et al. Self-densifcation behavior, interfacial bonding and cyclic ablation resistance of HfSi₂-ZrSi₂ modified SiC/ZrB₂-SiC/SiC coating for C_f/SiC composite. Corrosion Science, 219: 111223(2023).

[5] P J TANG, C L HU, S Y PANG et al. Interfacial modification and cyclic ablation behaviors of a SiC/ZrB₂-SiC/SiC triple-layer coating for C/SiC composites at above 2000 ℃. Corrosion Science.

[6] Q OUYANG, Y F WANG, J XU et al. Research progre.ss of SiC fiber reinforced SiC composites for nuclear application. Journal of Inorganic Materials, 37, 821(2022).

[7] Q CHEN, S X BAI, Y YE. Highly thermal conductive silicon carbide ceramics matrix composites for thermal management: a review. Journal of Inorganic Materials, 38, 634(2023).

[8] B Y ZHANG, L WANG, X M WANG et al. Effect of precursors on impregnation behaviors of C/SiC composites. Journal of Inorganic Materials, 35, 1017(2020).

[9] X Y SHEN, Q MA, Y D XUE et al. Effects of multilayered interfaces on mechanical damage of SiCf/SiC composites. Journal of Inorganic Materials, 38, 917(2023).

[10] S Y JI, B LIANG, B YANG et al. Long-term oxidation behaviors and strength retention properties of self-healing SiC_f/SiC-SiBCN composites. Journal of the European Ceramic Society, 43, 1843(2023).

[11] J J YAO, S Y PANG, C L HU et al. Mechanical, oxidation and ablation properties of C/(C-SiC)_CVI-(ZrC-SiC)_PIP composites. Corrosion Science, 162: 108200(2020).

[12] Y C JU, X Y LIU, Q WANG et al. Ablation behavior of ultra-high temperature composite ceramic matrix composites. Journal of Inorganic Materials, 37, 86(2022).

[13] Y F LIU, X FENG, J M WANG et al. Preparation and properties of high-performance needled C/C composites. Journal of Inorganic Materials, 35, 1105(2020).

[14] S Y PANG, P Y WANG, C L HU et al. Carbon fiber preform's structure on mechanical property of C/C composites and bolts. Journal of Inorganic Materials, 34, 1272(2019).

[15] B C PAN, P H REN, T J ZHOU et al. Microstructure and property of thermal insulation coating on the carbon fiber reinforced epoxy resin composites. Journal of Inorganic Materials, 35, 947(2020).

[17] D SCITI, L ZOLI, T REIMER et al. A systematic approach for horizontal and vertical scale up of sintered ultra-high temperature ceramic matrix composites for aerospace-advances and perspectives. Composites Part B: Engineering, 234: 109709(2022).

[18] R D ZHAO, S Y PANG, B LIANG et al. Comparative ablation behaviors of C/SiC-ZrC and C/SiC-HfC composites prepared by ceramization of carbon aerogel preforms. Corrosion Science, 225: 111623(2023).

[21] J J YAO, B LIANG, C L HU et al. Pitch resin addition induced evolution of composition, microstructure and mechanical property of C/C-SiC-ZrC composites. Journal of the European Ceramic Society, 42, 6412(2022).

[22] S ZHANG, Q Q FU, P ZHANG et al. Influence of high temperature treatment of C/C porous preform on friction and wear behavior of C/C-SiC composites. Journal of Inorganic Materials, 38, 561(2023).

[23] Y X WANG, S H TAN, D L JIANG. Research and development of reaction sintered silicon carbide. Journal of Inorganic Materials, 19, 456(2004).

[24] R P MESSNER, Y M CHIANG. Liquid-phase reaction-bonding of silicon carbide using alloyed silicon-molybdenum melts. Journal of the American Ceramic Society, 73, 1193(1990).

[25] Y M CHIANG, R P MESSNER, C D TERWILLIGER et al. Reaction-formed silicon carbide. Materials Science and Engineering: A, 144, 63(1991).

[26] M SINGH, R M DICKERSON. Microstructure and mechanical properties of reaction-formed silicon carbide (RFSC) ceramics. Materials Science and Engineering: A, 187, 183(1994).

[27] S J XU, G J QIAO, D C LI et al. Reaction forming of silicon carbide ceramic using phenolic resin derived porous carbon preform. Journal of the European Ceramic Society, 29, 2395(2009).

[28] M SINGH, R M DICKERSON. Characterization of SiC fiber (SCS-6) reinforced-reaction formed silicon carbide matrix composites. Journal of Materials Research, 11, 746(1996).

[29] M SINGH, R M DICKERSON, F A OLMSTEAD et al. SiC (SCS-6) fiber reinforced-reaction formed SiC matrix composites: microstructure and interfacial properties. Journal of Materials Research, 12, 706(1997).

[30] B MAINZER, K RODER, L WÖCKEL et al. Development of wound SiC_BN_x_/SiN_x/SiC with near stoichiometric SiC matrix via LSI process. Journal of the European Ceramic Society, 36, 1571(2016).

[31] Q ZHONG, X Y ZHANG, S M DONG et al. Reactive melt infiltrated C_f/SiC composites with robust matrix derived from novel engineered pyrolytic carbon structure. Ceramics International, 43, 5832(2017).

[33] J M ZHANG, XW CHEN, C J LIAO et al. Optimizing microstructure and properties of SiC_f/SiC composites prepared by reactive melt infiltration. Journal of Inorganic Materials, 36, 1103(2021).

[34] G D GUO, F YE, L F CHENG et al. A novel porous carbon synthesized to serve in the preparation of highly dense and high-strength SiC/SiC by reactive melt infiltration. Composites Part A: Applied Science and Manufacturing, 176: 107839(2024).

[35] Z D LIU, Y L WANG, X XIONG et al. Structural optimization and air-plasma ablation behaviors of C/C-SiC-(Zr_xHf_1-_x)C composites prepared by reactive melt infiltration method. Corrosion Science, 222: 111408(2023).

[39] R D ZHAO, S Y PANG, C L HU et al. Fabrication of C/SiC composites by siliconizing carbon fiber reinforced nanoporous carbon matrix preforms and their properties. Journal of the European Ceramic Society, 43, 273(2023).

[40] Y WU, R D ZHAO, B LIANG et al. Construction of C/SiC-Cu₃Si-Cu interpenetrating composites for long-duration thermal protection at 2500 ℃ by cooperative active-passive cooling. Composites Part B: Engineering, 266: 111015(2023).

[41] M SINGH, R M DICKERSON. Reactive melt infiltration of silicon-molybdenum alloys into microporous carbon preforms. Materials Science and Engineering: A, 194, 193(1995).

[42] M SINGH. Joining of sintered silicon carbide ceramics for high-temperature applications. Journal of materials science letters, 17, 459(1998).

[43] Y X WANG, S H TAN, D L JIANG. The effect of porous carbon preform and the infiltration process on the properties of reaction-formed SiC.. Carbon, 42, 1833(2004).

[44] Y X WANG, S H TAN, D L JIANG. The fabrication of reaction- formed silicon carbide with controlled microstructure by infiltrating a pure carbon preform with molten Si.. Ceramics International, 30, 435(2004).

[45] S J XU, G J QIAO, H J WANG et al. Preparation of mesoporous carbon by phenol resin polymerization-dependent phase separation and pyrolysis. Journal of Inorganic Materials, 23, 971(2008).

[47] S J XU, G J QIAO, H J WANG et al. Microstructure evolution and reaction mechanism of microporous carbon derived SiC ceramic. Journal of Inorganic Materials, 24, 291(2009).

[50] X S WU, Y Z ZHU, Q HUANG et al. Effect of pore structure of organic resin-based porous carbon on joining properties of C_f/SiC composites. Journal of Inorganic Materials, 37, 1275(2022).

[51] K Y ZHANG, R D ZHAO, Y Q YANG et al. Capillary infiltration of liquid silicon in carbon nanotubes: a molecular dynamics simulation. Journal of Materials Science & Technology, 144: 219(2023).

[52] R D ZHAO, C L HU, Y H WANG et al. Construction of sandwich-structured C/C-SiC and C/C-SiC-ZrC composites with good mechanical and anti-ablation properties. Journal of the European Ceramic Society, 42, 1219(2022).

[53] D K WANG, S M DONG, H J ZHOU et al. Fabrication and microstructure of 3D C_f/ZrC-SiC composites: through RMI method with ZrO₂ powders as pore-making agent. Ceramics International, 42, 6720(2016).

[54] D W NI, J X WANG, S M DONG et al. Fabrication and properties of C_f/ZrC-SiC-based composites by an improved reactive melt infiltration. Journal of the American Ceramic Society, 101, 3253(2018).

[56] X W CHEN, D W NI, Y M KAN et al. Reaction mechanism and microstructure development of ZrSi₂ melt-infiltrated C_f/SiC-ZrC- ZrB₂ composites: the influence of preform pore structures. Journal of Materiomics, 4, 266(2018).

[57] J MAGNANT, L MAILLÉ, R PAILLER et al. Carbon fiber/reaction-bonded carbide matrix for composite materials- manufacture and characterization. Journal of the European Ceramic Society, 32, 4497(2012).

[58] Y Q GAO, Y S LIU, J WANG et al. Formation mechanism of Si-Y-C ceramic matrix by reactive melt infiltration using Si-Y alloy and properties of C/Si-Y-C composites. Ceramics International, 46, 18976(2020).

[60] W J GUO, J HU, W FANG et al. A novel strategy for rapid fabrication of continuous carbon fiber reinforced (TiZrHfNbTa)C high-entropy ceramic composites: high-entropy alloy in-situ reactive melt infiltration. Journal of the European Ceramic Society, 43, 2295(2023).

[61] H R HE, J G TANG, W J GUO et al. Microstructures and formation mechanism of continuous carbon fiber-reinforced (TiZrHfNbTa)C high-entropy ceramic composites fabricated via high-entropy alloy reactive melt infiltration. Ceramics International, 49, 36997(2023).

[62] W J GUO, S X BAI, Y C YE. Controllable fabrication and mechanical properties of C/C-SiC composites based on an electromagnetic induction heating reactive melt infiltration. Journal of the European Ceramic Society, 41, 2347(2021).

[63] X G ZOU, D NI, B W CHEN et al. Fabrication and properties of C_f/Ta₄HfC₅-SiC composite via precursor infiltration and pyrolysis. Journal of the American Ceramic Society, 104, 6601(2021).

[64] F Y CAI, D W NI, W C BAO et al. Ablation behavior and mechanisms of C_f/(Ti_0.2Zr_0.2Hf_0.2Nb_0.2Ta_0.2) C-SiC high-entropy ceramic matrix composites. Composites Part B: Engineering, 243: 110177(2022).

微信扫一扫：分享

微信扫一扫：分享