[1] H. Wu, Y. Ge, G. Niu, J. Tang, Metal halide perovskites for X-ray detection and imaging. Matter 4, 144–163 (2021).

[2] Y. Li, Y. Lei, H. Wang, Z. Jin, Two-dimensional metal halides for X-ray detection applications. Nano-Micro Lett. 15, 128 (2023).

[3] S. Deumel, A. van Breemen, G. Gelinck, B. Peeters, J. Maas et al., High-sensitivity high-resolution X-ray imaging with soft-sintered metal halide perovskites. Nat. Electron. 4, 681–688 (2021).

[4] Y. Zhang, Y. Liu, Z. Xu, H. Ye, Z. Yang et al., Nucleation-controlled growth of superior lead-free perovskite Cs3Bi2I9 single-crystals for high-performance X-ray detection. Nat. Commun. 11, 2304 (2020).

[5] Q. Chen, J. Wu, X. Ou, B. Huang, J. Almutlaq et al., All-inorganic perovskite nanocrystal scintillators. Nature 561, 88–93 (2018).

[6] W. Zhu, W. Ma, Y. Su, Z. Chen, X. Chen et al., Low-dose real-time X-ray imaging with nontoxic double perovskite scintillators. Light. Sci. Appl. 9, 112 (2020).

[7] Y. Zhou, J. Chen, O.M. Bakr, O.F. Mohammed, Metal halide perovskites for X-ray imaging scintillators and detectors. ACS Energy Lett. 6, 739–768 (2021).

[8] Y. Liu, Y. Zhang, X. Zhu, J. Feng, I. Spanopoulos et al., Triple-cation and mixed-halide perovskite single crystal for high-performance X-ray imaging. Adv. Mater. 33, e2006010 (2021).

[9] W. Pan, B. Yang, G. Niu, K.-H. Xue, X. Du et al., Hot-pressed CsPbBr3 quasi-monocrystalline film for sensitive direct X-ray detection. Adv. Mater. 31, e1904405 (2019).

[10] O.D.I. Moseley, T.A.S. Doherty, R. Parmee, M. Anaya, S.D. Stranks, Halide perovskites scintillators: unique promise and current limitations. J. Mater. Chem. C Mater. 9, 11588–11604 (2021).

[11] A. Wibowo, M.A.K. Sheikh, L.J. Diguna, M.B. Ananda, M.A. Marsudi et al., Development and challenges in perovskite scintillators for high-resolution imaging and timing applications. Commun. Mater. 4, 21 (2023).

[12] X. Zheng, W. Zhao, P. Wang, H. Tan, M.I. Saidaminov et al., Ultrasensitive and stable X-ray detection using zero-dimensional lead-free perovskites. J. Energy Chem. 49, 299–306 (2020).

[13] W. Wei, Y. Zhang, Q. Xu, H. Wei, Y. Fang et al., Monolithic integration of hybrid perovskite single crystals with heterogenous substrate for highly sensitive X-ray imaging. Nat. Photonics 11, 315–321 (2017).

[14] L. Li, X. Liu, H. Zhang, B. Zhang, W. Jie et al., Enhanced X-ray sensitivity of MAPbBr3 detector by tailoring the interface-states density. ACS Appl. Mater. Interfaces 11, 7522–7528 (2019).

[15] K. Sakhatskyi, R.A. John, A. Guerrero, S. Tsarev, S. Sabisch et al., Assessing the drawbacks and benefits of ion migration in lead halide perovskites. ACS Energy Lett. 7, 3401–3414 (2022).

[16] B. Conings, J. Drijkoningen, N. Gauquelin, A. Babayigit, J. D’Haen et al., Intrinsic thermal instability of methylammonium lead trihalide perovskite. Adv. Energy Mater. 5, 1500477 (2015).

[17] H. Tsai, F. Liu, S. Shrestha, K. Fernando, S. Tretiak et al., A sensitive and robust thin-film X-ray detector using 2D layered perovskite diodes. Sci. Adv. 6, eaay0815 (2020).

[18] Q. Xu, W. Shao, Y. Li, X. Zhang, X. Ouyang et al., High-performance surface barrier X-ray detector based on methylammonium lead tribromide single crystals. ACS Appl. Mater. Interfaces 11, 9679–9684 (2019).

[19] Y. Luo, M.R. Abidian, J.-H. Ahn, D. Akinwande, A.M. Andrews et al., Technology roadmap for flexible sensors. ACS Nano 17, 5211–5295 (2023).

[20] G.J. Matt, I. Levchuk, J. Knüttel, J. Dallmann, A. Osvet et al., Sensitive direct converting X-Ray detectors utilizing crystalline CsPbBr3 perovskite films fabricated via scalable melt processing. Adv. Mater. Interfaces 7, 1901575 (2020).

[21] M. Yao, J. Jiang, D. Xin, Y. Ma, W. Wei et al., High-temperature stable FAPbBr3 single crystals for sensitive X-ray and visible light detection toward space. Nano Lett. 21, 3947–3955 (2021).

[22] Y. Huang, L. Qiao, Y. Jiang, T. He, R. Long et al., A-site cation engineering for highly efficient MAPbI3 single-crystal X-ray detector. Angew. Chem. Int. Ed. 58, 17834–17842 (2019).

[23] J. Jiang, M. Xiong, K. Fan, C. Bao, D. Xin et al., Synergistic strain engineering of perovskite single crystals for highly stable and sensitive X-ray detectors with low-bias imaging and monitoring. Nat. Photonics 16, 575–581 (2022).

[24] P.-T. Lai, H.-C. Lin, Y.-T. Chuang, C.-Y. Chen, W.-K. Cheng et al., All-vacuum-deposited perovskite X-ray detector with a record-high self-powered sensitivity of 1.2 C Gy–1 cm–3. ACS Appl. Mater. Interfaces 14, 19795–19805 (2022).

[25] J. Wu, L. Wang, A. Feng, S. Yang, N. Li et al., Self-powered FA0.55MA0.45PbI3 single-crystal perovskite X-ray detectors with high sensitivity. Adv. Funct. Mater. 32, 2109149 (2022).

[26] J. Yukta, M.A. Ghosh, S. Afroz, P.J.S. Alghamdi et al., Efficient and highly stable X-ray detection and imaging using 2D (BA)2PbI4 perovskite single crystals. ACS Photonics 9, 3529–3539 (2022).

[27] H. Wu, X. Chen, Z. Song, A. Zhang, X. Du et al., Mechanochemical synthesis of high-entropy perovskite toward highly sensitive and stable X-ray flat-panel detectors. Adv. Mater. 35, e2301406 (2023).

[28] X. Xu, W. Qian, J. Wang, J. Yang, J. Chen et al., Sequential growth of 2D/3D double-layer perovskite films with superior X-ray detection performance. Adv. Sci. 8, e2102730 (2021).

[29] P. Jin, Y. Tang, D. Li, Y. Wang, P. Ran et al., Realizing nearly-zero dark current and ultrahigh signal-to-noise ratio perovskite X-ray detector and image array by dark-current-shunting strategy. Nat. Commun. 14, 626 (2023).

[30] N.K. Tailor, J. Ghosh, M.A. Afroz, S. Bennett, M. Chatterjee et al., Self-powered x-ray detection and imaging using Cs2AgBiCl6 lead-free double perovskite single crystal. ACS Appl. Electron. Mater. 4, 4530–4539 (2022).

[31] N. Li, Y. Li, S. Xie, J. Wu, N. Liu et al., High-performance and self-powered X-ray detectors made of smooth perovskite microcrystalline films with 100 μm grains. Angew. Chem. Int. Ed. 62, e202302435 (2023).

[32] Q. Xu, C. Li, J. Nie, Y. Guo, X. Wang et al., Highly sensitive and stable X-ray detector based on a 0D structural Cs4PbI6 single crystal. J. Phys. Chem. Lett. 12, 287–293 (2021).

[33] J. Zhao, L. Zhao, Y. Deng, X. Xiao, Z. Ni et al., Perovskite-filled membranes for flexible and large-area direct-conversion X-ray detector arrays. Nat. Photonics 14, 612–617 (2020).

[34] A. Singh, F. Matteocci, H. Zhu, D. Rossi, S. Mejaouri et al., Methylamine gas treatment affords improving semitransparency, efficiency, and stability of CH3NH3PbBr3-based perovskite solar cells. Sol. RRL 5, 2100277 (2021).

[35] H. Karl, Zum mechanismus des lichtelektrischen primärstromes in isolierenden kristallen. Z. Für Phys. 77, 235–245 (1932).

[36] Y. Xu, Q. Lin, Photodetectors based on solution-processable semiconductors: recent advances and perspectives. Appl. Phys. Rev. 7, 011315 (2020).

[37] H. Shen, R. Nan, Z. Jian, X. Li, Defect step controlled growth of perovskite MAPbBr3 single crystal. J. Mater. Sci. 54, 11596–11603 (2019).

[38] W. Peng, L. Wang, B. Murali, K.-T. Ho, A. Bera et al., Solution-grown monocrystalline hybrid perovskite films for hole-transporter-free solar cells. Adv. Mater. 28, 3383–3390 (2016).

[39] O. Almora, D. Baran, G.C. Bazan, C.I. Cabrera, S. Erten-Ela et al., Device performance of emerging photovoltaic materials (Version 3). Adv. Energy Mater. 13, 2203313 (2023).

[40] F. Matteocci, D. Rossi, L.A. Castriotta, D. Ory, S. Mejaouri et al., Wide bandgap halide perovskite absorbers for semi-transparent photovoltaics: from theoretical design to modules. Nano Energy 101, 107560 (2022).

[41] L. Basiricò, S.P. Senanayak, A. Ciavatti, M. Abdi-Jalebi, B. Fraboni et al., Detection of X-rays by solution-processed cesium-containing mixed triple cation perovskite thin films. Adv. Funct. Mater. 29, 1902346 (2019).

[42] W. Rehman, R.L. Milot, G.E. Eperon, C. Wehrenfennig, J.L. Boland et al., Charge-carrier dynamics and mobilities in formamidinium lead mixed-halide perovskites. Adv. Mater. 27, 7938–7944 (2015).

[43] S.H. Bennett, J. Ghosh, E. Gros-Daillon, F. Lédée, J. Mayén Guillén et al., Charge transport comparison of FA, MA and Cs lead halide perovskite single crystals for radiation detection. Front. Detect. Sci. Technol. 1, 1249892 (2023).

[44] X. Liu, M. Xu, Y. Hao, J. Fu, F. Wang et al., Solution-grown formamidinium hybrid perovskite (FAPbBr3) single crystals for α-particle and γ-ray detection at room temperature. ACS Appl. Mater. Interfaces 13, 15383–15390 (2021).

[45] J. Cai, T. Zhao, M. Chen, J. Su, X. Shen et al., Ion migration in the all-inorganic perovskite CsPbBr3 and its impacts on photodetection. J. Phys. Chem. C 126, 10007–10013 (2022).

[46] C. Kalha, N.K. Fernando, P. Bhatt, F.O.L. Johansson, A. Lindblad et al., Hard X-ray photoelectron spectroscopy: a snapshot of the state-of-the-art in 2020. J. Phys. Condens. Matter 33, 233001 (2021).

[47] W.-G. Li, X.-D. Wang, Y.-H. Huang, D.-B. Kuang, Ultrasound-assisted crystallization enables large-area perovskite quasi-monocrystalline film for high-sensitive X-ray detection and imaging. Adv. Mater. 35, e2210878 (2023).

[48] S. Kasap, J.B. Frey, G. Belev, O. Tousignant, H. Mani et al., Amorphous selenium and its alloys from early xeroradiography to high resolution X-ray image detectors and ultrasensitive imaging tubes. Phys. Status Solidi B 246, 1794–1805 (2009).

[49] D.R. Shearer, M. Bopaiah, Dose rate limitations of integrating survey meters for diagnostic X-ray surveys. Health Phys. 79, S20–S21 (2000).

[50] H. Tsai, L. Pan, X. Li, J. Yoo, S. Tretiak et al., Quantum efficiency gain in 2D perovskite photo and X-ray detectors. Adv. Opt. Mater. 11, 2300847 (2023).

[51] J. Kim, M. Kang, S. Lee, C. So, D.S. Chung, Interfacial electrostatic-interaction-enhanced photomultiplication for ultrahigh external quantum efficiency of organic photodiodes. Adv. Mater. 33, e2104689 (2021).

[52] A. Crnjac, M.R. Ramos, N. Skukan, M. Pomorski, M. Jakšić, Charge transport in single crystal CVD diamond studied at high temperatures. J. Phys. D Appl. Phys. 54, 465103 (2021).

[53] Y. He, L. Matei, H.J. Jung, K.M. McCall, M. Chen et al., High spectral resolution of gamma-rays at room temperature by perovskite CsPbBr3 single crystals. Nat. Commun. 9, 1609 (2018).

[54] M. Holland, A. Ruth, K. Mielczarek, V.V. Dhas, J.J. Berry et al., Metal halide perovskites demonstrate radiation hardness and defect healing in vacuum. ACS Appl. Mater. Interfaces 14, 9352–9362 (2022).

[55] A. Ciavatti, R. Sorrentino, L. Basiricò, B. Passarella, M. Caironi et al., High-sensitivity flexible X-ray detectors based on printed perovskite inks. Adv. Funct. Mater. 31, 2009072 (2021).

[56] M. Li, H. Li, W. Li, B. Li, T. Lu et al., Oriented 2D perovskite wafers for anisotropic X-ray detection through a fast tableting strategy. Adv. Mater. 34, e2108020 (2022).

[57] IEC – International Electrotechnical Commission, Medical electrical equipment - Part 2–43: Particular requirements for the basic safety and essential performance of X-ray equipment for interventional procedures, IEC 60601–2–43, Geneva, Switzerland (2022). https://www.iecee.org/certification/iec-standards/iec-60601-2-432022

[58] D.L. Miller, D. Kwon, G.H. Bonavia, Reference levels for patient radiation doses in interventional radiology: proposed initial values for U.S. practice. Radiology 253, 753–764 (2009).

[59] V. Milotti, S. Cacovich, D.R. Ceratti, D. Ory, J. Barichello et al., Degradation and self-healing of FAPbBr3 perovskite under soft-X-ray irradiation. Small Methods 7, e2300222 (2023).

[60] F.T.F. O’Mahony, Y.H. Lee, C. Jellett, S. Dmitrov, D.T.J. Bryant et al., Improved environmental stability of organic lead trihalide perovskite-based photoactive-layers in the presence of mesoporous TiO2. J. Mater. Chem. A 3, 7219–7223 (2015).

[61] S. Pettinato, M. Girolami, A. Stravato, V. Serpente, D. Musio et al., A highly versatile X-ray and electron beam diamond dosimeter for radiation therapy and protection. Materials 16, 824 (2023).

[62] S. Pettinato, M. Girolami, R. Olivieri, A. Stravato, C. Caruso et al., Time-resolved dosimetry of pulsed photon beams for radiotherapy based on diamond detector. IEEE Sens. J. 22, 12348–12356 (2022).

[63] S. Yakunin, M. Sytnyk, D. Kriegner, S. Shrestha, M. Richter et al., Detection of X-ray photons by solution-processed lead halide perovskites. Nat. Photonics 9, 444–449 (2015).

[64] Z. Gou, S. Huanglong, W. Ke, H. Sun, H. Tian et al., Self-powered X-ray detector based on all-inorganic perovskite thick film with high sensitivity under low dose rate. Phys. Status Solidi RRL 13, 1900094 (2019).

[65] K. Tao, C. Xiong, J. Lin, D. Ma, S. Lin et al., Self-powered photodetector based on perovskite/NiOx heterostructure for sensitive visible light and X-ray detection. Adv. Electron. Mater. 9, 2201222 (2023).

[66] L. Zhou, X. Lu, J. Wu, H. Jiang, L. Chen et al., Self-powered fast-response X-ray detectors based on vertical GaN p-n diodes. IEEE Electron Device Lett. 40, 1044–1047 (2019).

[67] M. Xia, Z. Song, H. Wu, X. Du, X. He et al., Compact and large-area perovskite films achieved via soft-pressing and multi-functional polymerizable binder for flat-panel X-ray imager. Adv. Funct. Mater. 32, 2110729 (2022).

[68] H. Wei, Y. Fang, P. Mulligan, W. Chuirazzi, H.-H. Fang et al., Sensitive X-ray detectors made of methylammonium lead tribromide perovskite single crystals. Nat. Photonics 10, 333–339 (2016).

[69] X. Wang, D. Zhao, Y. Qiu, Y. Huang, Y. Wu et al., PIN diodes array made of perovskite single crystal for X-ray imaging. Phys. Status Solidi RRL 12, 1800380 (2018).

[70] J. Song, X. Feng, H. Li, W. Li, T. Lu et al., Facile strategy for facet competition management to improve the performance of perovskite single-crystal X-ray detectors. J. Phys. Chem. Lett. 11, 3529–3535 (2020).

[71] S. Tian, F. Sui, K. He, G. Cheng, Y. Ge et al., Co-axial silicon/perovskite heterojunction arrays for high-performance direct-conversion pixelated X-ray detectors. Nano Energy 78, 105335 (2020).

[72] J. Peng, K. Ye, Y. Xu, L. Cui, R. Li et al., X-ray detection based on crushed perovskite crystal/polymer composites. Sens. Actuat. A Phys. 312, 112132 (2020).

[73] X. Wang, Y. Wu, G. Li, J. Wu, X. Zhang et al., Ultrafast ionizing radiation detection by p–n junctions made with single crystals of solution-processed perovskite. Adv. Electron. Mater. 4, 1800237 (2018).

[74] F. Ye, H. Lin, H. Wu, L. Zhu, Z. Huang et al., High-quality cuboid CH3NH3PbI3 single crystals for high performance X-ray and photon detectors. Adv. Funct. Mater. 29, 1806984 (2019).

[75] S. Shrestha, R. Fischer, G.J. Matt, P. Feldner, T. Michel et al., High-performance direct conversion X-ray detectors based on sintered hybrid lead triiodide perovskite wafers. Nat. Photonics 11, 436–440 (2017).

[76] M. Hu, S. Jia, Y. Liu, J. Cui, Y. Zhang et al., Large and dense organic-inorganic hybrid perovskite CH3NH3PbI3 wafer fabricated by one-step reactive direct wafer production with high X-ray sensitivity. ACS Appl. Mater. Interfaces 12, 16592–16600 (2020).

[77] Y.C. Kim, K.H. Kim, D.-Y. Son, D.-N. Jeong, J.-Y. Seo et al., Printable organometallic perovskite enables large-area, low-dose X-ray imaging. Nature 550, 87–91 (2017).

[78] Q. Xu, X. Wang, H. Zhang, W. Shao, J. Nie et al., CsPbBr3 single crystal X-ray detector with Schottky barrier for X-ray imaging application. ACS Appl. Electron. Mater. 2, 879–884 (2020).

[79] J. Li, X. Du, G. Niu, H. Xie, Y. Chen et al., Rubidium doping to enhance carrier transport in CsPbBr3 single crystals for high-performance X-ray detection. ACS Appl. Mater. Interfaces 12, 989–996 (2020).

[80] Z. Li, S. Chang, H. Zhang, Y. Hu, Y. Huang et al., Flexible lead-free X-ray detector from metal-organic frameworks. Nano Lett. 21, 6983–6989 (2021).

[81] W. Pan, H. Wu, J. Luo, Z. Deng, C. Ge et al., Cs2AgBiBr6 single-crystal X-ray detectors with a low detection limit. Nat. Photonics 11, 726–732 (2017).

[82] W. Yuan, G. Niu, Y. Xian, H. Wu, H. Wang et al., In situ regulating the order–disorder phase transition in Cs2AgBiBr6 single crystal toward the application in an X-Ray detector. Adv. Funct. Mater. 29, 1900234 (2019).

[83] L. Yin, H. Wu, W. Pan, B. Yang, P. Li et al., Controlled cooling for synthesis of Cs2AgBiBr6 single crystals and its application for X-ray detection. Adv. Opt. Mater. 7, 1900491 (2019).

[84] B. Yang, W. Pan, H. Wu, G. Niu, J.-H. Yuan et al., Heteroepitaxial passivation of Cs2AgBiBr6 wafers with suppressed ionic migration for X-ray imaging. Nat. Commun. 10, 1989 (2019).

[85] M. Keshavarz, E. Debroye, M. Ottesen, C. Martin, H. Zhang et al., Tuning the structural and optoelectronic properties of Cs2 AgBiBr6 double-perovskite single crystals through alkali-metal substitution. Adv. Mater. 32, e2001878 (2020).

[86] R. Zhuang, X. Wang, W. Ma, Y. Wu, X. Chen et al., Highly sensitive X-ray detector made of layered perovskite-like (NH4)3Bi2I9 single crystal with anisotropic response. Nat. Photonics 13, 602–608 (2019).

[87] Y. Xu, B. Jiao, T.-B. Song, C.C. Stoumpos, Y. He et al., Zero-dimensional Cs2TeI6 perovskite: solution-processed thick films with high X-ray sensitivity. ACS Photonics 6, 196–203 (2019).

[88] H. Wang, H. Wu, Y. Xian, G. Niu, W. Yuan et al., Controllable CsxFA1-xPbI3 single-crystal morphology via rationally regulating the diffusion and collision of micelles toward high-performance photon detectors. ACS Appl. Mater. Interfaces 11, 13812–13821 (2019).

[89] Q. Sun, Y. Xu, H. Zhang, B. Xiao, X. Liu et al., Optical and electronic anisotropies in perovskitoid crystals of Cs3Bi2I9 studies of nuclear radiation detection. J. Mater. Chem. A 6, 23388–23395 (2018).

[90] Y. Liu, Z. Xu, Z. Yang, Y. Zhang, J. Cui et al., Inch-size 0D-structured lead-free perovskite single crystals for highly sensitive stable X-ray imaging. Matter 3, 180–196 (2020).

[91] S. Tie, W. Zhao, D. Xin, M. Zhang, J. Long et al., Robust fabrication of hybrid lead-free perovskite pellets for stable X-ray detectors with low detection limit. Adv. Mater. 32, e2001981 (2020).

[92] M. Xia, J.-H. Yuan, G. Niu, X. Du, L. Yin et al., Unveiling the structural descriptor of A3B2X9 perovskite derivatives toward X-ray detectors with low detection limit and high stability. Adv. Funct. Mater. 30, 1910648 (2020).

[93] H. Li, J. Song, W. Pan, D. Xu, W.-A. Zhu et al., Sensitive and stable 2D perovskite single-crystal X-ray detectors enabled by a supramolecular anchor. Adv. Mater. 32, e2003790 (2020).

[94] C. Ji, S. Wang, Y. Wang, H. Chen, L. Li et al., 2D hybrid perovskite ferroelectric enables highly sensitive X-ray detection with low driving voltage. Adv. Funct. Mater. 30, 1905529 (2020).

[95] L. Yao, G. Niu, L. Yin, X. Du, Y. Lin et al., Bismuth halide perovskite derivatives for direct X-ray detection. J. Mater. Chem. C 8, 1239–1243 (2020).

[96] Y. Shen, Y. Liu, H. Ye, Y. Zheng, Q. Wei et al., Centimeter-sized single crystal of two-dimensional halide perovskites incorporating straight-chain symmetric diammonium ion for X-ray detection. Angew. Chem. Int. Ed. 59, 14896–14902 (2020).

[97] Z. Xu, X. Liu, Y. Li, X. Liu, T. Yang et al., Exploring lead-free hybrid double perovskite crystals of (BA)2 CsAgBiBr7 with large mobility-lifetime product toward X-ray detection. Angew. Chem. Int. Ed. 58, 15757–15761 (2019).

[98] X. Song, Q. Cui, Y. Liu, Z. Xu, H. Cohen et al., Metal-free halide perovskite single crystals with very long charge lifetimes for efficient X-ray imaging. Adv. Mater. 32, e2003353 (2020).

[99] W. Guo, X. Liu, S. Han, Y. Liu, Z. Xu et al., Room-temperature ferroelectric material composed of a two-dimensional metal halide double perovskite for X-ray detection. Angew. Chem. Int. Ed. 59, 13879–13884 (2020).

[100] H. Du, L.E. Antonuk, Y. El-Mohri, Q. Zhao, Z. Su et al., Investigation of the signal behavior at diagnostic energies of prototype, direct detection, active matrix, flat-panel imagers incorporating polycrystalline HgI2. Phys. Med. Biol. 53, 1325 (2008).

[101] S. Tokuda, H. Kishihara, S. Adachi, T. Sato, Preparation and characterization of polycrystalline CdZnTe films for large-area, high-sensitivity X-ray detectors. J. Mater. Sci. Mater. Electron. 15, 1–8 (2004).

[102] D.M. Trucchi, P. Allegrini, A. Bellucci, P. Calvani, A. Galbiati et al., Resistant and sensitive single-crystal diamond dosimeters for ionizing radiation. Nucl. Instrum. Meth. Phys. Res. Sect A Accel. Spectrometers Detect. Assoc. Equip. 718, 373–375 (2013).

[103] M. Girolami, M. Bosi, V. Serpente, M. Mastellone, L. Seravalli et al., Orthorhombic undoped κ-Ga2O3 epitaxial thin films for sensitive, fast, and stable direct X-ray detectors. J. Mater. Chem. C 11, 3759–3769 (2023).

[104] H.M. Thirimanne, K.D.G.I. Jayawardena, A.J. Parnell, R.M.I. Bandara, A. Karalasingam et al., High sensitivity organic inorganic hybrid X-ray detectors with direct transduction and broadband response. Nat. Commun. 9, 2926 (2018).

[105] R. Zhuang, S. Cai, Z. Mei, H. Liang, N. Zhao et al., Solution-grown BiI/BiI3 van der Waals heterostructures for sensitive X-ray detection. Nat. Commun. 14, 1621 (2023).

[106] Y. Liu, X. Zheng, Y. Fang, Y. Zhou, Z. Ni et al., Ligand assisted growth of perovskite single crystals with low defect density. Nat. Commun. 12, 1686 (2021).