[1] Liu N X, Wang C S, Liang Y P et al. Influence of Nb on microstructure and properties of Ti-Zr congruent alloy fabricated by laser directed energy deposition[J]. Chinese Journal of Lasers, 49, 2202016(2022).

[2] Bai W J, Chen J Q. Influence of laser cladding thermal cycle on the microstructure and mechanical properties of TC4[J]. Chinese Journal of Lasers, 49, 2202017(2022).

[3] Liu Y F, Zhou B S, Zhang T. Laser joining of carbon fiber reinforced plastics to titanium alloy via laser texturing[J]. Chinese Journal of Lasers, 49, 1803001(2022).

[4] Fu X Q, Han B, Wang Y et al. Study on structure and corrosion resistance of the TA2 surface of laser gas nitriding[J]. Chinese Journal of Lasers, 38, 0403004(2011).

[5] Wang Z D, Wang S B, Wu E K et al. Electrochemical corrosion characteristics of Ti-6Al-4V repaired using underwater directed energy deposition technique[J]. Chinese Journal of Lasers, 49, 1402806(2022).

[6] Ashrafizadeh A, Ashrafizadeh F. Structural features and corrosion analysis of thermally oxidized titanium[J]. Journal of Alloys and Compounds, 480, 849-852(2009).

[7] Li F Q, Wang S L, Chen Y B et al. Investigation of bioceramic composite coatings fabricated by laser cladding on Ti6Al4V surface[J]. Chinese Journal of Lasers, 42, 0603005(2015).

[8] Wang S, Liu Y H, Zhang C X et al. The improvement of wettability, biotribological behavior and corrosion resistance of titanium alloy pretreated by thermal oxidation[J]. Tribology International, 79, 174-182(2014).

[9] Zou T, Chen C J, Zhang M et al. Study on laser welding mechanisms of glass/stainless-steel and glass/titanium-alloy materials[J]. Chinese Journal of Lasers, 43, 0902002(2016).

[10] Qin J F, Wang X B, Zou J J et al. Research progress of thermal oxidation effect on improving surface properties of titanium and titanium alloy[J]. Surface Technology, 46, 1-8(2017).

[11] Huang M Y, Xin S W, Zhao Y Q et al. Isothermal oxidation behavior of Ti40 alloy at 500-1000 ℃[J]. Rare Metal Materials and Engineering, 44, 1163-1168(2015).

[12] Dai J J, Zhu J Y, Chen C Z et al. High temperature oxidation behavior and research status of modifications on improving high temperature oxidation resistance of titanium alloys and titanium aluminides: a review[J]. Journal of Alloys and Compounds, 685, 784-798(2016).

[13] Zhang K, Luo G X, Chen G N. Study of laser oxidizing for titanium hardening[J]. Heat Treatment of Metals, 30, 8-10(2005).

[14] Xu X W, Liu H X, Tan W S et al. Process parameters modeling and optimization of laser welding of titanium alloy and high borosilicate glass[J]. Hot Working Technology, 48, 228-234(2019).

[15] Rajabi A, Mashreghi A R, Hasani S. Non-isothermal kinetic analysis of high temperature oxidation of Ti-6Al-4V alloy[J]. Journal of Alloys and Compounds, 815, 151948(2020).

[16] Li L, Wang L P, Wang X F et al. Simulation and analysis of temperature field in NiAl coatings prepared by self-propagating method[J]. China Surface Engineering, 31, 169-177(2018).

[17] Bhatti A A, Barsoum Z, Murakawa H et al. Influence of thermo-mechanical material properties of different steel grades on welding residual stresses and angular distortion[J]. Materials & Design, 65, 878-889(2015).

[18] Tamanna N, Kabir I R, Naher S. Thermo-mechanical modelling to evaluate residual stress and material compatibility of laser cladding process depositing similar and dissimilar material on Ti6Al4V alloy[J]. Thermal Science and Engineering Progress, 31, 101283(2022).

[19] Mishra A K, Kumar A. Numerical and experimental analysis of the effect of volumetric energy absorption in powder layer on thermal-fluidic transport in selective laser melting of Ti6Al4V[J]. Optics & Laser Technology, 111, 227-239(2019).

[20] Hao M Z, Sun Y W. A FEM model for simulating temperature field in coaxial laser cladding of Ti6Al4V alloy using an inverse modeling approach[J]. International Journal of Heat and Mass Transfer, 64, 352-360(2013).

[21] Kumar C, Das M, Paul C P et al. Comparison of bead shape, microstructure and mechanical properties of fiber laser beam welding of 2 mm thick plates of Ti-6Al-4V alloy[J]. Optics & Laser Technology, 105, 306-321(2018).