[2] L ZHANG, H LIU, H YAO et al. Preparation, microstructure, and properties of ZrO2 (3Y)/Al2O3 bioceramics for 3D printing of all-ceramic dental implants by vat photopolymerization.
[3] R J HE, N P ZHOU, K Q ZHANG et al. Progress and challenges towards additive manufacturing of SiC ceramic.
[4] L ZHAN, Y XIA, X ZHANG et al. Effects of stereolithography process parameters on the curing properties of Si3N4 ceramic slurries.
[5] J K YUAN, S F XIONG, Z W CHEN. Research trends and challenges of additive manufacturing of polymer-derived ceramics.
[6] C L CRAMER, E IONESCU, M GRACZYK-ZAJAC et al. Additive manufacturing of ceramic materials for energy applications: road map and opportunities.
[7] L N KHANLAR, RIOS A SALAZAR, A TAHMASEB et al. Additive manufacturing of zirconia ceramic and its application in clinical dentistry: a review.
[8] LANTADA A DÍAZ, A DE BLAS ROMERO, M SCHWENTENWEIN et al. Monolithic 3D labs- and organs-on-chips obtained by lithography-based ceramic manufacture.
[9] H WANG, K HU, M CHENG et al. Additive manufacturing of liquid-cooled ceramic heat sinks: an experimental and numerical study.
[10] Z CHEN, X SONG, L LEI et al. 3D printing of piezoelectric element for energy focusing and ultrasonic sensing.
[11] U SCHEITHAUER, F KERBER, A FUSSEL et al. Alternative process routes to manufacture porous ceramics-opportunities and challenges.
[12] N KOVACEV, S LI, W LI et al. Additive manufacturing of novel hybrid monolithic ceramic substrates.
[14] H LI, Y LIU, Y LIU et al. Silica strengthened alumina ceramic cores prepared by 3D printing.
[15] J LI, X AN, J LIANG et al. Recent advances in the stereolithographic three-dimensional printing of ceramic cores: challenges and prospects.
[17] J SCHMIDT, A A ALTUN, M SCHWENTENWEIN et al. Complex mullite structures fabricated via digital light processing of a preceramic polysiloxane with active alumina fillers.
[18] R T LEE, W S CHENG, C S LEE et al. Mullite ceramic fabrication by 3D printing. Proceedings of the 7th International Conference on Mechanics and Materials in Design, Albufeira(2017).
[19] F BOUVILLE, E MAIRE, S MEILLE et al. Strong, tough and stiff bioinspired ceramics from brittle constituents.
[20] F BOUVILLE. Strong and tough nacre-like aluminas: process- structure-performance relationships and position within the nacre- inspired composite landscape.
[21] R LIBANORI, D CARNELLI, N ROTHFUCHS et al. Composites reinforced via mechanical interlocking of surface-roughened microplatelets within ductile and brittle matrices.
[23] S WESTBEEK, DOMMELEN J A W VAN, J J C REMMERS et al. Influence of particle shape in the additive manufacturing process for ceramics.
[24] B OZKAN, F SAMENI, A GOULAS et al. Hot ceramic lithography of silica-based ceramic cores: the effect of process temperature on vat-photopolymierisation.
[25] X WU, C XU, Z ZHANG. Preparation and optimization of Si3N4ceramic slurry for low-cost LCD mask stereolithography.
[26] C QIAN, K HU, J LI et al. The effect of light scattering in stereolithography ceramic manufacturing.
[30] J TENG, X WU, Y JIN et al. Effects of platelet addition and loading direction on the mechanical properties of textured alumina fabricated by ceramic mask stereolithography.
