[1] Gong J A, Fang T C, Zuo J Q. A review of key technologies development of super high-rise building construction in China[J]. Advances in Civil Engineering, 2022, 1-13(2022).

[2] Li D S, Liu J P, Hu S L et al. A deep learning-based indoor acceptance system for assessment on flatness and verticality quality of concrete surfaces[J]. Journal of Building Engineering, 51, 104284(2022).

[3] Wang Q A, Kim M K, Sohn H et al. Surface flatness and distortion inspection of precast concrete elements using laser scanning technology[J]. Smart Structures and Systems, 18, 601-623(2016).

[4] Cao Y X, Liu J P, Feng S Q et al. Towards automatic flatness quality assessment for building indoor acceptance via terrestrial laser scanning[J]. Measurement, 203, 111862(2022).

[5] Liu J P, Cui N, Zhou X H et al. Intelligent inspection method for dimensional quality of houses based on 3D laser scanning[J]. Journal of Architecture and Civil Engineering, 39, 71-80, 3(2022).

[6] Li D S, Liu J P, Feng L et al. Terrestrial laser scanning assisted flatness quality assessment for two different types of concrete surfaces[J]. Measurement, 154, 107436(2020).

[7] Tang P B, Akinci B, Huber D. Characterization of three algorithms for detecting surface flatness defects from dense point clouds[J]. Proceedings of SPIE, 7239, 72390N(2009).

[8] Wang E M, Guo J M, Yang F et al. Detection of flatness and verticality of buildings based on 3D laser scanning technology[J]. Bulletin of Surveying and Mapping, 85-88(2019).

[9] Bosché F, Guenet E. Automating surface flatness control using terrestrial laser scanning and building information models[J]. Automation in Construction, 44, 212-226(2014).

[10] Puri N S, Valero E, Turkan Y et al. Assessment of compliance of dimensional tolerances in concrete slabs using TLS data and the 2D continuous wavelet transform[J]. Automation in Construction, 94, 62-72(2018).

[11] Wang F, Qiu G X, Cheng X J. An improved robust method for iterating least-squares plane fitting[J]. Journal of Tongji University (Natural Science), 39, 1350-1354(2011).

[12] Cang G H, Yue J P. Plane fitting of point clouds based on weighted total least square[J]. Laser Technology, 38, 307-310(2014).

[13] Huang Y, Da F P, Tang L. Three-dimensional point cloud compression algorithm based on improved octree[J]. Acta Optica Sinica, 37, 1210003(2017).

[14] Li R Z, Yang M, Liu Y Y et al. An uniform simplification algorithm for scattered point cloud[J]. Acta Optica Sinica, 37, 0710002(2017).

[15] Chen X J, Zhang G, Hua X H. Point cloud simplification based on the information entropy of normal vector angle[J]. Chinese Journal of Lasers, 42, 0814003(2015).

[16] Guan Y L, Liu S T, Zhou S J et al. Robust plane fitting of point clouds based on TLS[J]. Journal of Geodesy and Geodynamics, 31, 80-83(2011).

[17] Li M D, Jiang S P, Wang H P. A RANSAC-based stable plane fitting method of point clouds[J]. Science of Surveying and Mapping, 40, 102-106(2015).