• Infrared and Laser Engineering
  • Vol. 51, Issue 7, 20210688 (2022)
Changda Zhang1,2, Mingyou Gao1, Yan Zhou3, Xiaozhou Deng1..., Xin Xiong1, Fenglei Liu1 and Weiguo Zhang1,*|Show fewer author(s)
Author Affiliations
  • 1Research Center for Micro-Nano Manufacturing and System Integration, Chongqing Institute of Green and Intelligent Technology, Chinese Academy of Sciences, Chongqing 400714, China
  • 2School of Information Science and Engineering, Chongqing Jiaotong University, Chongqing 400074, China
  • 3Tianjin Jinhang Institute of Technical Physics, Tianjin 300308, China
  • show less
    DOI: 10.3788/IRLA20210688 Cite this Article
    Changda Zhang, Mingyou Gao, Yan Zhou, Xiaozhou Deng, Xin Xiong, Fenglei Liu, Weiguo Zhang. Preparation method of silicon-based aspheric cylindrical microlens array[J]. Infrared and Laser Engineering, 2022, 51(7): 20210688 Copy Citation Text show less
    References

    [1] Qun Yuan, Wen Ji, Zhishan Gao. Geometric characteristics and error analysis of standard spherical lenses. Applied Optics, 41, 857-867(2020).

    [2] Huang Ziyue, Deng Yu, Ji Xiaoling. The influence of spherical aberration on the beam quality of highpower laser beams in the upward atmosphere [J]. Acta Physica Sinica, 2021, 70(23): 234202. (in Chinese)

    [3] Shuwu Sheng, Linhai Li, Zhihui Xin, . Uncertainty analysis of convex lens focal length measurement and system deviation correction. Acta Optica Sinica, 41, 1412001(2021).

    [4] Guangwei Zhang, Xinting Zhang. Design of large numerical aperture extreme ultraviolet lithography objective lens. Science Technology and Engineering, 13, 9619-9621, 9640(2013).

    [5] Sujuan Chen, Jiexiang Chen, Mingming Xu. Large numerical aperture dielectric structure lens. Infrared and Laser Engineering, 43, 479-482(2014).

    [6] Kejun Zhu, Shaohui Yin, Jianwu Yu, . Finite element analysis of aspheric glass lens compression molding. China Mechanical Engineering, 24, 2509-2514(2013).

    [7] Xiangyang Liu. Design method of aspheric microlens prepared by hot melt photoresist method. Acta Optica Sinica, 39, 0208001(2019).

    [8] Tianfeng Zhou, Jiaqing Xie, Zhiqiang Liang, . Research progress and prospects of optical microlens array compression molding. Chinese Optics, 10, 603-618, 703(2017).

    [9] Chen Bo, Guo Lurong, Tang Jiyue, et al. Novel method f making microopticselements with continuous relief [J]. Chinese Journal of Lasers B,1997, 6(1): 5763.

    [10] Hongjun Zeng, Bo Chen, Lurong Guo. Frame effect and its application in mask moving technology. Optoelectronic Engineering, 27, 19-22(2000).

    [11] Hong Ye, Huilong Wu. Analysis of typical problems in mask manufacturing process. Research and Progress in Solid State Electronics, 29, 606-607, 614(2009).

    [12] Zhijing Liu, Chen Liu. Lithography and plasma etching technology. Physics, 45-49(1999).

    [13] Min Jin, Fang Wang. Research on the coating and edge scraping process of photoresist on wafer surface. Mechanical Management Development, 35, 55-56(2020).

    [14] Jiaji Wang. The influence of mask deformation on the accuracy of graphics. Semiconductor Technology, 20-24(1988).

    [15] Hong Zhou, Jianjun Lai, Yue Zhao, . SF_ 6/O_ 2/CHF_ 3 Reactive ion etching of silicon in mixed gases. Semiconductor Technology, 28-31(2005).

    Changda Zhang, Mingyou Gao, Yan Zhou, Xiaozhou Deng, Xin Xiong, Fenglei Liu, Weiguo Zhang. Preparation method of silicon-based aspheric cylindrical microlens array[J]. Infrared and Laser Engineering, 2022, 51(7): 20210688
    Download Citation