[1] K E Perepelkin. Oxidized (cyclized) polyacrylonitrile fibres—oxypan. A review. Fibre Chemistry, 35, 409-416(2003).

[2] A T Serkov, G A Budnitskii, M B Radishevskii et al. Improving carbon fibre production technology. Fibre Chemistry, 35, 117-121(2003).

[3] G Y Heo, Y J Yoo, S J Park. Effect of carbonization temperature on electrical conductivity of carbon papers prepared from petroleum pitch-coated glass fibers. Journal of Industrial and Engineering Chemistry, 19, 1040-1043(2013).

[4] E Jeong, J Kim, S H Cho et al. New application of layered silicates for carbon fiber reinforced carbon composites. Journal of Industrial and Engineering Chemistry, 17, 191-197(2011).

[5] P K Miao, D M Wu, K Zeng et al. Influence of electron beam pre-irradiation on the thermal behaviors of polyacrylonitrile. Polymer Degradation and Stability, 95, 1665-1671(2010).

[6] H K Shin, M Park, P H Kang et al. Preparation and characterization of polyacrylonitrile-based carbon fibers produced by electron beam irradiation pretreatment. Journal of Industrial and Engineering Chemistry, 20, 3789-3792(2014).

[7] Zhongze WANG, Shan ZHONG, Bowen ZHANG et al. Study on pre-oxidation thermal behavior of PAN precursor by comonomer modification. New Chemical Materials, 45, 116-118(2017).

[8] Z Y Fu, B J Liu, Y J Deng et al. The suitable itaconic acid content in polyacrylonitrile copolymers used for PAN-based carbon fibers. Journal of Applied Polymer Science, 133, 43919(2016).

[9] S Park, H S Kil, D Choi et al. Rapid stabilization of polyacrylonitrile fibers achieved by plasma-assisted thermal treatment on electron-beam irradiated fibers. Journal of Industrial and Engineering Chemistry, 69, 449-454(2019).

[10] Wenli ZHANG. High dose rate electron beam irradiation effect of polyacrylonitrile fiber and subsequent effect on pre-oxidation(2020).

[11] Chengguo WANG, Bo ZHU. Polyacrylonitrile based carbon fiber, 29-41(2011).

[12] Y Q Zhao, C G Wang, Y X Wang et al. Aqueous deposited copolymerization of acrylonitrile and itaconic acid. Journal of Applied Polymer Science, 111, 3163-3169(2009).

[13] J C Simitzis, P C Georgiou. Functional group changes of polyacrylonitrile fibres during their oxidative, carbonization and electrochemical treatment. Journal of Materials Science, 50, 4547-4564(2015).

[14] H L Zhang, L Quan, F J Shi et al. Rheological behavior of amino-functionalized multi-walled carbon nanotube/polyacrylonitrile concentrated solutions and crystal structure of composite fibers. Polymers, 10, 186(2018).

[15] D Kim, K S Kim, S Ko et al. Assessment of geotechnical variability of Songdo silty clay. Engineering Geology, 133, 1-8(2012).

[16] M C Paiva, P Kotasthane, D D Edie et al. UV stabilization route for melt-processible PAN-based carbon fibers. Carbon, 41, 1399-1409(2003).

[17] Wangxi ZHANG. Effect of itaconic acid on the structure and properties of pan precursor. Acta Polymerica Sinica, 287-291(2000).

[18] S Dalton, F Heatley, P M Budd. Thermal stabilization of polyacrylonitrile fibres. Polymer, 40, 5531-5543(1999).

[19] Z Y Fu, Y Gui, S Liu et al. Effects of an itaconic acid comonomer on the structural evolution and thermal behaviors of polyacrylonitrile used for polyacrylonitrile-based carbon fibers. Journal of Applied Polymer Science, 131, 40834(2014).

[20] M J Yu, C G Wang, Y Q Zhao et al. Thermal properties of acrylonitrile/itaconic acid polymers in oxidative and nonoxidative atmospheres. Journal of Applied Polymer Science, 1207-1212(2009).

[21] H L Zhang, L Quan, A J Gao et al. Thermal analysis and crystal structure of poly(acrylonitrile-Co-itaconic acid) copolymers synthesized in water. Polymers, 12, 221(2020).

[22] J Mittal, H Konno, M Inagaki et al. Denitrogenation behavior and tensile strength increase during carbonization of stabilized pan fibers. Carbon, 36, 1327-1330(1998).