[2] M C TUCKER. Progress in metal-supported solid oxide fuel cells: a review. Journal of Power Sources, 4570(2010).
[3] M SAIED, K AHMED, M AHMED et al. Investigations of solid oxide fuel cells with functionally graded electrodes for high performance and safe thermal stress. International Journal of Hydrogen Energy, 15887(2017).
[4] S OSMAN, K AHMED, M NEMATTALLA et al. Performance and thermal stresses in functionally graded anode-supported honeycomb solid-oxide fuel cells. International Journal of Hydrogen Energy, 33010(2021).
[5] Z WANG, N ZHANG, J QIAO et al. Improved SOFC performance with continuously graded anode functional layer. Electrochemistry Communications, 1120(2009).
[7] M SONG, C DU, B WANG et al. Thermal stress of solid oxide fuel cell with gradient porosity anode. Journal of the Chinese Ceramic Society, 1233(2022).
[8] X ZHANG, Z YAN, Y ZHOU et al. Residual thermal stress and failure probability analysis of solid oxide fuel cell with gradient anode. Journal of the Chinese Ceramic Society, 1223(2022).
[9] Z YAN, A HE, S HARA et al. Design and optimization of functionally graded electrodes for solid oxide fuel cells (SOFCs) by mesoscale modeling. International Journal of Hydrogen Energy, 16610(2022).
[10] M RADOVIC, E LARA-CURZIO. Elastic properties of nickel- based anodes for solid oxide fuel cells as a function of the fraction of reduced NiO. Journal of the American Ceramic Society, 2242(2004).
[11] M KISHIMOTO, H IWAI, M SAITO et al. Quantitative evaluation of solid oxide fuel cell porous anode microstructure based on focused ion beam and scanning electron microscope technique and prediction of anode overpotentials. Journal of Power Sources, 4555(2011).
[12] C L HSIEH, W H TUAN. Elastic and thermal expansion behavior of two-phase composites. Materials Science and Engineering: A, 349(2006).
[13] M MORI, T YAMAMOTO, H ITOH et al. Thermal expansion of nickel- zirconia anodes in solid oxide fuel cells during fabrication and operation. Journal of the Electrochemical Society, 1374(1998).
[14] J JOHNSON, J QU. Effective modulus and coefficient of thermal expansion of Ni-YSZ porous cermets. Journal of Power Sources, 85(2008).
[15] M MORI, Y HIEI, N M SAMMES et al. Thermal-expansion behaviors and mechanisms for Ca- or Sr-doped lanthanum manganite perovskites under oxidizing atmospheres. Journal of the Electrochemical Society, 1295(2000).
[16] F GRECO, H L FRANDSEN, A NAKAJO et al. Modelling the impact of creep on the probability of failure of a solid oxide fuel cell stack. Journal of the European Ceramic Society, 2695(2014).
[17] I K SUH, H OHTA, Y WASEDA. High-temperature thermal expansion of six metallic elements measured by dilatation method and X-ray diffraction. Journal of Materials Science, 757(1988).
[18] Q LI, G LI. Modeling of the solid oxide fuel cell anode based on a new analytical model using nonlinear Butler-Volmer expression. Ionics, 3063(2021).
[19] H YAKABE, Y BABA, T SAKURAI et al. Evaluation of residual stresses in a SOFC stack. Journal of Power Sources, 278(2004).
[20] H Y JUNG, W S KIM, S H CHOI et al. Effect of cathode current- collecting layer on unit-cell performance of anode-supported solid oxide fuel cells. Journal of Power Sources, 145(2006).
