Process Control of PyC Interphases Microstructure and Uniformity in Carbon Fiber Cloth

Yifan XUE; Weijie LI; Zhongwei ZHANG; Xu PANG; Yu LIU

doi:10.15541/jim20230512

[1] S F TANG, C L HU. Design, preparation and properties of carbon fiber reinforced ultra-high temperature ceramic composites for aerospace applications: a review. Journal of Materials Science & Technology, 117(2017).

[2] S SCHMIDT, S BEYER, H KNABE et al. Advanced ceramic matrix composite materials for current and future propulsion technology applications. Acta Astronautica, 409(2004).

[3] D L ZHAO, T GUO, X M FAN et al. Effect of pyrolytic carbon interphase on mechanical properties of mini T800-C/SiC composites. Journal of Advanced Ceramics, 219(2021).

[4] S SCHMIDT, S BEYER, H IMMICH et al. Ceramic matrix composites: a challenge in space-propulsion technology applications. International Journal of Applied Ceramic Technology, 85(2005).

[5] C NIU, Q ZHANG, L CHENG et al. Microstructure and mechanical properties of C_f/SiC composites with dispersed C-SiC interphase prepared by chemical vapor infiltration. Composites Part A: Applied Science and Manufacturing, 107339(2023).

[6] R R NASLAIN, R J F PAILLER, J L LAMON. Single- and multilayered interphases in SiC/SiC composites exposed to severe environmental conditions: an overview. International Journal of Applied Ceramic Technology, 263(2010).

[7] R J KERANS, R S HAY, T A PARTHASARATHY et al. Interface design for oxidation-resistant ceramic composites. Journal of the American Ceramic Society, 2599(2002).

[8] J KABEL, P HOSEMANN, Y ZAYACHUK et al. Ceramic composites: a review of toughening mechanisms and demonstration of micropillar compression for interface property extraction. Journal of Materials Research, 424(2018).

[9] R NASLAIN, O DUGNE, A GUETTE et al. Boron-nitride interphase in ceramic-matrix composites. Journal of the American Ceramic Society, 2482(1991).

[10] K SU, Z K CHEN, L B LI et al. Effects of single-phase and Co-deposited interphases on mechanical hysteresis behavior in T700(TM) mini-C_f/SiC composites. International Journal of Fatigue, 107473(2023).

[11] A M NAGARAJA, S GURURAJA, A UDAYAKUMAR. Tensile behavior of ceramic matrix minicomposites with engineered interphases fabricated by chemical vapor infiltration. Journal of the European Ceramic Society, 2659(2022).

[12] R NASLAIN, J LAMON, R PAILLER et al. Micro/minicomposites: a useful approach to the design and development of non-oxide CMCs. Composites Part A: Applied Science and Manufacturing, 537(1999).

[13] X Y CAO, X W YIN, X K MA et al. Oxidation behavior of SiBC matrix modified C/SiC composites with different PyC interphase thicknesses. Ceramics International, 1695(2015).

[14] H Z DUAN, Z W ZHANG, L B LI et al. Effect of pyrocarbon interphase texture and thickness on tensile damage and fracture in T-700 (TM) carbon fiber-reinforced silicon carbide minicomposites. Journal of the American Ceramic Society, 2171(2022).

[15] H MEI, Q L BAI, Y Y SUN et al. The effect of heat treatment on the strength and toughness of carbon fiber/silicon carbide composites with different pyrolytic carbon interphase thicknesses. Carbon, 288(2013).

[16] B REZNIK, K J HÜTTINGER. On the terminology for pyrolytic carbon. Carbon, 621(2002).

[17] W LI, H J LI, J WANG et al. Preparation and mechanical properties of carbon/carbon composites with high textured pyrolytic carbon matrix. Transactions of Nonferrous Metals Society of China, 2129(2013).

[18] J M VALLEROT, X BOURRAT, A MOUCHON et al. Quantitative structural and textural assessment of laminar pyrocarbons through Raman spectroscopy, electron diffraction and few other techniques. Carbon, 1833(2006).

[19] A BECKER, K J HUTTINGER. Chemistry and kinetics of chemical vapor deposition of pyrocarbon-III-pyrocarbon deposition from propylene and benzene in the low temperature regime. Carbon, 201(1998).

微信扫一扫：分享

微信扫一扫：分享