Junlin WU, Jiyang DING, Xinyou HUANG, Danyang ZHU, Dong HUANG, Zhengfa DAI, Wenqin YANG, Xingfen JIANG, Jianrong ZHOU, Zhijia SUN, Jiang LI. Fabrication and Microstructure of Gd2O2S:Tb Scintillation Ceramics from Water-bath Synthesized Nano-powders: Influence of H2SO4/Gd2O3 Molar Ratio [J]. Journal of Inorganic Materials, 2023, 38(4): 452

Search by keywords or author
- Journal of Inorganic Materials
- Vol. 38, Issue 4, 452 (2023)

1. XRD patterns of the products prepared with different n of H2SO4 and Gd2O3 in hot water bath at 90 ℃ for 2 h

2. XRD patterns of the products calcined in air at 600 ℃ for 3 h from the precursors prepared with different n

3. XRD patterns of the products calcined in air and reduced in H2 at 750 ℃ for 2 h from the precursors prepared with different n

4. FESEM morphologies of Gd2O2S: Tb powders with different n (a) n =1.00; (b) n =1.25; (c) n =1.50; (d) n =1.75; (e) n =2.00; (f) n =2.25; (g) n =2.50; (h) n =2.75; (i) n =3.00

5. XEL spectra and normalized integral intensity curves in the range of 350-700 nm of Gd2O2S:Tb powders with different n (a) XEL spectra; (b) Normalized integral intensity curves; Colorful figures are available on website

6. Relative densities of Gd2O2S:Tb ceramics vacuum pre-sintered at 1300 ℃ for 3 h and HIP post-treatment at 1450 ℃ for 3 h fabricated from the powders with different n

7. FESEM micrograph and EDS patterns (white area) of the Gd2O2S:Tb ceramics vacuum pre-sintered at 1300 ℃ for 3 h and HIP post-treatment at 1450 ℃ for 3 h fabricated from the powders prepared with n =1.00

8. FESEM morphologies of Gd2O2S:Tb ceramics fabricated from the powders prepared with different n (a) n =1.00; (b) n =1.25; (c) n =1.50; (d) n =1.75; (e) n =2.00; (f) n =2.25; (g) n =2.50; (h) n =2.75; (i) n =3.00

9. XEL spectra and normalized integral intensity curves in the range of 350-700 nm of Gd2O2S:Tb ceramics fabricated from the powders with different n (a) XEL spectra; (b) Normalized integral intensity curves; Colorful figures are available on website

Set citation alerts for the article
Please enter your email address